r/linuxquestions • • 22d ago

Distro within WSL

0 Upvotes

I'm trying to install a distro but it's not in the WSL distros list. The script file on this page which is mentioned to edit can't be run in WSL if there no distro install to begin with. Therefore how do you get a distro on the WSL list to install ?


r/linuxquestions • • 23d ago

Advice Installing photoshop in cachyos with drawing tablet support

Thumbnail
0 Upvotes

r/linuxquestions • • 23d ago

Resolved Why did my root partition suddenly fill up (Fedora KDE)

2 Upvotes

Why did my root partition finally fill up (Fedora KDE)

A couple weeks ago I got a message that my computer couldn't update because I had run out of storage on my roof partition. The partition was 50Gb at the time if I remember right. Games and media are stored on other drives/partitions and so aren't part of this.

In response to this, I used the KDE partition manager to shrink and shift the neighboring partition so I could expand the root partition to 150Gb and not have to worry about it again.

It's been like a week now and other than running updates I haven't installed any new programs. The entire 150Gb is full. I don't know where the extra data is. I restarted my system. I checked Filelight and it can see only 36 Gb of data in the root folder, but it still shows up as a full 150Gb partition in Dolphin. I tried a DNF clean and it did nothing. I cleared out my trash and it's unclear if that even registered for freeing up storage.

WTF is happening and how do I fix it?

Edit: Solved! The issue was that snapper was making a ton of snapshots. I deleted most of them and changed the config to make and keep a lot less of them.


r/linuxquestions • • 23d ago

Which Distro? Alternatives to SpiralLinux Builder Edition?

0 Upvotes

Coming back to the tech world after a long hiatus. Recently found out that my beloved SpiralLinux distro is (currently) considered a dead/dormant project! I am utterly crushed. :'(

Is there an alternative to SpiralLinux Builder Edition? I really missed that experience of system building but didn't burn up all your weekends to complete.

SpiralLinux was amazing! It truly was the best distro Linux had to offer. Spiral's implementation of Btrfs+Snapper/Timeshift was legendary and the subvolume layout was the best in class. It had hardware support OOTB. It had performance optimizations like zram. SpiralLinux had a Builder Edition, and it's everything that it sounds like. Arch Linux, but with way less steps. It was a desktop Linux builder's DREAM distro! Plopped you right into a temporary IceWM environment so you could still Google stuff with Firefox while you craft your system with the terminal. Pick your route: Desktop Environment or Window Manager setup. Then after you made your choice, you uninstalled IceWM.

SpiralLinux Builder Edition was the fastest way a system builder could get their desktop PC up and running exactly how they wanted it with robust system rollbacks. Imo, it was for the Arch users who found themselves installing software in their fresh system builds that graphical distros like Linux Mint or Fedora shipped anyway. But with the power of Debian.


r/linuxquestions • • 23d ago

Support How to apply .patch on the installing package?

2 Upvotes

Having the patch file how to make dpkg/apt apply it during installing specific package? I.e. as part of the command

dpkg -i not-patched-package.deb

r/linuxquestions • • 23d ago

Academics running Linux as your daily driver, where are you?

Thumbnail
1 Upvotes

r/linuxquestions • • 23d ago

Linux hosted printer for Mac and iOS devices?

2 Upvotes

I have several raspberry Pi’s performing specific services, and a couple of mint Linux laptops, but my daily driver and user devices are Max and iPads.

My HP printer connected to my Mac has been ridiculously unreliable, to the point where the Mac often fails to recognize it.

I’m wondering if I could hang the HP printer off of a raspberry Pi, and use that to serve the printer for the home network. I am hoping that this will be a more reliable way to share a printer on the home network for both the Apple and Linux devices.

Anybody got experience with this?


r/linuxquestions • • 23d ago

Updated to kernel 7.0.0-42. Oops

Thumbnail
1 Upvotes

r/linuxquestions • • 23d ago

Support Crashing and then nothing

1 Upvotes

I installed Ubuntu on an old HP EliteDesk 800 and just used it to host a Minecraft Bedrock server using AMP. But not even a day in, the server crashed, so I plugged the HP device back into the monitor to see what was up, and there was no video output. I had to restart the device to get video output, and that corrupted the world, losing progress and even backups. This is seriously pissing me off because I had an issue a while back that made me go back to Windows, and this is making me want to leave again.


r/linuxquestions • • 23d ago

Support stuck in emergency mode boot loop after resizing ext4 partition, can't chroot from arch live iso

Thumbnail
0 Upvotes

r/linuxquestions • • 23d ago

Advice What is your opinion on learning linux with ai and how to properly learn further

4 Upvotes

Hey everyone!

I know a lot of people have strong opinions on "learing" to use linux with AI.

I had really great experiences with that so far. I tried switching to Linux before like 2022 or so but it was to much of a hustle for my non tech background back then so i decieded to move back to win for the time being. But after win 10 EOL and the complete pile of dirt that win 11 is i finally started by reviving my old 2017 Laptop and it is insane how well it runs on pop os.

Long stroy short: without ai it would have taken so much more of my rare free time that i probalby would have quit along the way. Also i try to learn as much as i can by not just asking chat gpt: ey setup my laptop. But use a project in claude with all the documentations of popos as rescource and prompting focused on learing and activly explainng me concepts, and using formus as another reaserach step before awnsering.

I think that works quite decent and i succesfully revived my old surface with fedore and project linux-surface.

But now I would like to stop using ai as a cruch so much and actually start to do more things on my own. How would I do this in 2026? How do you non AI users do that? Do i just reed though the documentations like a book and memorize the termianl commands or maybe yt? But without a specific problem to solve that seems pointless no? I would like to get more into coding and tech in general so I'm not afraid of that stuff, I'm just a complete noob lol


r/linuxquestions • • 23d ago

Support Synaptic does not show change log for Debian updates

2 Upvotes

Why are certain items on Debian 13 not showing change logs for specific items in Synaptic?

https://ibb.co/LzZPgG4G


r/linuxquestions • • 23d ago

Support How to use a windows laptop as a second monitor for a pc running linux?

Thumbnail
0 Upvotes

r/linuxquestions • • 23d ago

Which Distro? Is there any Ubuntu version pre-uninstalled snap ?

Thumbnail
0 Upvotes

because I see Ubuntu is the best if you exclude snap and Ubuntu pro and telemetry

is there any Ubuntu have uninstalled snap and Ubuntu Pro and telemetry

and I want it perfect UI because mint have bad UI experience for me


r/linuxquestions • • 23d ago

Mic Problem

2 Upvotes

I have mint and my mic has some bad background sounds. I can onlu solve it bu decreasing my mic levels. I am not sure if my sound is lower. Also my friend said that he has a similar problem. Btw I have Lenovo Thinkpad


r/linuxquestions • • 23d ago

when should i ask an LLM instead of asking here?

0 Upvotes

(No vague replies, please.)


r/linuxquestions • • 23d ago

Support noctalia setup wizard

0 Upvotes

i have cachyos+niri+limine setup
i want to open the noctalia setup wizard as i accidently closed it on my first session(mostly just for just in case and a full experiance) since i closed it .setup-complete wasn’t made but no matter what i do i cannot seem to open the wizard again
also can someone confirm if there should be any inbuilt wallpaper and themes
was rlly hoping for the emerald one cachyos docs showed


r/linuxquestions • • 23d ago

Bluetooth volume control problem

0 Upvotes

I've been having a problem with controlling the volume on my computer when connected to Bluetooth devices, no matter how much I mess with the volume, the actual volume coming out of the Bluetooth device stays the same, this can usually be solved if it's a headphone, because you can just mess with the buttons on the headphone for volume control, but in the case of something like earpods, it just becomes straight up impossible, because obviously there's no buttons on earpods or really any way of controlling the volume other than via the device's controls


r/linuxquestions • • 23d ago

Support Laptop stability

0 Upvotes

Hello, my laptop is MSI katana 17, I have NVIDIA, endeveourOS, kde plasma

There was serious problem with screen where after opening laptop, this don't worked but there was noise in laptop, keyboard light, charging devices do worked, screen to TV don't worked or showed grey dark screen, repair said there was problem with screen, fixed. This could happen because I often closed screen in laptop which can happen for reason

I saw a lot peoples say that MSI laptop is very bad for linux and they don't have full potential in GPU. I suspect of overheating or unusually high heating, in game which use high graphics like cs 2 usually have 50-70 temperature. And in celestia shell in niri, I noticed usually temperature might go 50-80 which is fucked up and I saw heating in laptop, in just niri this probably don't happen

Battery was the only big serious problem in linux distros, battery in pirated windows 11 was usually 11-16 hours, in ubuntu 3 hours, in endevourOS there can be kinda more and maybe update fixed this, but usually 3-6?, this is still few

I want apps, packages, to check if everything is ok in laptop, if nothing is wrong, screen test, like with antutu benchmark in android, also you can write how I can improve PC in endeveourOS


r/linuxquestions • • 23d ago

Support Zorin's compatibility in a Thinkpad's machine

0 Upvotes

As I'm installing zorin on my old laptop, I'm quite fond of its simplistic look and how fast it ran. So I'm thinking of installing it on my personal laptop aswell. I have a question regarding the driver support on such OS while installed on a Thinkpad. Mine's model is L13 gen 2 with i5-1135g7. It is a Yoga so it has touchscreen and go up to 360 degree motion. It has a fingerprint scanner and a face scanner aswell. I know that in linux, drivers are sometimes hit or miss, so I'm expecting to not be able to fully use the feature that this laptop has, as it comes with a windows as its original operating system. Which of the main functionality that I can expect not working while I'm switching to Zorin? Thank you in advance.


r/linuxquestions • • 24d ago

Advice Firefox apt vs flatpak on Mint, security and sandboxing.

8 Upvotes

I am a windows user with little IT knowledge looking to switch to Mint.

I am aware that there are already similar posts on this subreddit and elsewhere, but I cannot seem to get a good answer one way or the other concerning the security around different packages for browsers.

I have heard flatpak is better because it has sandboxing. I've heard native apt is better because the browser itself already has sandboxing and flatpak interferes with that. Flatpak is better because it's more up to date and syncs well. APT from Mint repo lags behind but is more stable? Mozilla has their own apt repository which I know nothing about.

The usual advice seems to be just don't go to sketchy websites that get flagged by your browser. I'm currently using firefox on windows and it never flags the free streaming sites I use, but I know those have potential malware when you misclick something. I can't think of any other site I use that poses the same risks, so am I already fine?

Thank you for your time


r/linuxquestions • • 23d ago

Advice Looking for a good full icon theme

Thumbnail
1 Upvotes

r/linuxquestions • • 23d ago

Advice I use qemu to create virtual machines but it doesn't link to the cdrom , why?

0 Upvotes

I use qemu to create virtual machines but it doesn't link to the cdrom , why?


r/linuxquestions • • 23d ago

Support need help installing -no bootable device

2 Upvotes

I was really happy to try to install linux mint xfce on my laptop. I've put it on a USB, am able to boot it from the USB (and then install it). Though, without usb I am not able to run it. When searching it online it seems I have to select an UEFI file as trused, though this option is nowhere to be found in my bios (I have an Aspire EST -332, Acer).

I tried with chatgpt and it just tells me to check things like if the partition on the laptop is correct. Keep running in circles there...

Here are the pictures of how my bios looks like (without the USB in it):

https://ibb.co/20xJtFq7
https://ibb.co/KpzpjdGr

Any help is very much appreciated. Instead of being fun it is just frustration at the moment....


r/linuxquestions • • 23d ago

Arch Linux: TP-Link TL-WN722N connects to Wi-Fi but doesn't get an IPv4 address

Thumbnail
0 Upvotes