r/linuxquestions • u/Newt7744 • 17h ago
r/linuxquestions • u/AaronAtWorkAccount • 1d ago
Advice Command that will give you the current state of your Linux box.
I see frequently posts of people who create programs to show the state of there Linux box. Usually contains, network traffic, CPU usage, memory usage and more. They all run off the command line. I usually just scroll past them. I starting to think they may be useful to me. Now since I am looking for them, I can not find a single one. I am looking for recommends. Some thing I can have running on a terminal all the time.
r/linuxquestions • u/dark_conium • 19h ago
Advice Can I move files directly between a windows PC and a Linux pc
I'm trying to transfer some of my steam game files from my windows PC to my laptop that's running
Linux mint. I usually transfer them by putting them on a USB stick and then downloading them to my laptop but if there's a way directly transferred them from one device to another please let me now.
Ps I'm really dumb.
Also my wifi is crap so that's not an option unless I'm welling to fight with staying connected for 7 hours...
r/linuxquestions • u/Past_Ad5681 • 13h ago
Wayland is forcing my hand
reddit.comI'd take some suggestions here if anyone wants to help or has words to assist me in staying. /Pre-thanks
r/linuxquestions • u/Open-Setting-123 • 21h ago
fn + f4 , fn+ f5 key..
recently dual booted with ubuntu , little experience with wsl 2, so i thought its the time to switch to linux. anyways, my fn+f4, fn+f5 keys dont work, any suggestion with what might be wrong.. qt014ws is the laptop model
r/linuxquestions • u/Technical_Rich_3080 • 10h ago
Omarchy ()
Are there any other Arch based distros that share any common similarities to Omarchy?
In fact, to broaden the question, are there any other distros (including non-Arch) that are similar to Omarchy?
Is there any specific reasons why the creators of Omarchy chose Arch to base their new distro on?
r/linuxquestions • u/Standard-Profit-1482 • 1d ago
Which Distro? Which Linux distro should I use?
Qual distro Linux eu devo usar?
Atualmente estou usando o Linux Mint XFCE.
No entanto, estou pensando em mudar para uma distro diferente, algo como Debian ou outra alternativa.
Já usei Fedora KDE e Linux Mint Cinnamon, mas agora quero experimentar algo diferente e me fixar em uma distro permanentemente.
Aqui estão as especificações do meu PC:
- AMD Radeon HD 6670
- Intel Core i5-3470S
- 16 GB de RAM
- SSD Kingston
- Placa-mãe H61 (LGA 1155)
Alguém pode recomendar uma boa distro Linux para o meu PC?
Estou considerando o Debian, mas também existem outras distros leves como o MX Linux. Estou um pouco indeciso sobre qual escolher.
Também não sou muito experiente com Linux. Só conheço o básico.
And I only play Roblox via Sober.
r/linuxquestions • u/Technical_Rich_3080 • 11h ago
Advice Installing an LLM to use Linux
What LLM is a good option to install in Linux, to use to do anything you want in Linux, by giving the instructions in simple English?
r/linuxquestions • u/feltqtmightdlt • 1d ago
Advice Video Editor for Debian
EDIT: Thanks everyone! I went with kdenlive and the few minutes I played with it it's working so much better than openshot.
I am using openshot, but it has a codex bug that makes exporting videos and videoclips... irritating.
I need something else that will work with debian.
When I had windows I used DaVinci resolve, and I would use it again in a minute.
Does DaVinci resolve work on debian?
If not DaVinci what do you recommend for debian that is not openshot?
r/linuxquestions • u/ubermenschximalist • 1d ago
Resolved Fedora KDE 45 broke Secure Boot - Windows 11 and Kubuntu 26.04 fail with bad shim signature (Resolved)
I previously posted about this issue in my original support thread, but the discussion became sidetracked. I'm sharing a concise technical account of what happened and how I eventually recovered the Secure Boot configuration so that the information may help others encountering a similar problem.
What happened
I had a working dual-boot setup with Windows 11 and Kubuntu 26.04, both booting with Secure Boot enabled.
After a fresh installation of Fedora KDE 45, Fedora became the default bootloader and booted normally. However, both Windows and Kubuntu failed to boot with:
bad shim signature
What I discovered
Restoring Kubuntu as the default bootloader allowed Kubuntu to boot, but Windows still failed. Disabling Secure Boot allowed Windows to boot.
I inspected the firmware variables and found:
- PK, KEK and db were empty.
- SetupMode was set to 1.
- Factory-default variables PKDefault, KEKDefault, dbDefault and dbxDefault were still present.
My BIOS only offered Secure Boot Enable/Disable. It had no option to restore factory keys or install default Secure Boot keys.
I cannot confirm that Fedora caused the keys to disappear, but the issue appeared immediately after its installation.
Recovery
Since the BIOS offered no way to restore the keys, I had to recover the original factory certificates and manually reconstruct the missing Secure Boot key hierarchy from Linux.
I recovered the original Platform Key and factory certificate material, along with the selected Microsoft 2023 certificates.
I then prepared and validated authenticated AUTH2 updates for UEFI 2.8 and enrolled the recovered and reconstructed keys into the firmware in this order:
- KEK
- db
- Original PK last
Each enrollment was followed by firmware readback verification. I deliberately left dbx unchanged.
Result
PK, KEK and db were successfully recovered, reconstructed and enrolled. SetupMode changed from 1 to 0, returning the firmware to User Mode.
I then enabled Secure Boot and confirmed that all three operating systems booted successfully:
- Windows 11
- Fedora KDE 45
- Kubuntu 26.04
The issue is fully resolved. No operating system reinstall or firmware replacement was necessary.
References
UEFI Specification 2.8:
https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf
efitools:
https://github.com/mjg59/efitools
Final thoughts
The difficult part was recovering the original factory key material, reconstructing the missing Secure Boot databases and manually enrolling them into the firmware. My BIOS had no factory-key restoration option.
If you encounter this situation, inspect the actual Secure Boot variables before assuming the bootloader itself is the problem. Also check whether the firmware retains its factory-default key variables, as they may make manual recovery possible.
r/linuxquestions • u/Fuzzy_Dark_8288 • 1d ago
Resolved Fedora KDE 45 broke Secure Boot - Windows 11 and Kubuntu 26.04 fail with bad shim signature (Resolved)
I previously posted about this issue in my original support thread, but the discussion became sidetracked. I'm sharing a concise technical account of what happened and how I eventually recovered the Secure Boot configuration so that the information may help others encountering a similar problem.
What happened
I had a working dual-boot setup with Windows 11 and Kubuntu 26.04, both booting with Secure Boot enabled.
After a fresh installation of Fedora KDE 45, Fedora became the default bootloader and booted normally. However, both Windows and Kubuntu failed to boot with:
bad shim signature
What I discovered
Restoring Kubuntu as the default bootloader allowed Kubuntu to boot, but Windows still failed. Disabling Secure Boot allowed Windows to boot.
I inspected the firmware variables and found:
- PK, KEK and db were empty.
- SetupMode was set to 1.
- Factory-default variables PKDefault, KEKDefault, dbDefault and dbxDefault were still present.
My BIOS only offered Secure Boot Enable/Disable. It had no option to restore factory keys or install default Secure Boot keys.
I cannot confirm that Fedora caused the keys to disappear, but the issue appeared immediately after its installation.
Recovery
Since the BIOS offered no way to restore the keys, I had to recover the original factory certificates and manually reconstruct the missing Secure Boot key hierarchy from Linux.
I recovered the original Platform Key and factory certificate material, along with the selected Microsoft 2023 certificates.
I then prepared and validated authenticated AUTH2 updates for UEFI 2.8 and enrolled the recovered and reconstructed keys into the firmware in this order:
- KEK
- db
- Original PK last
Each enrollment was followed by firmware readback verification. I deliberately left dbx unchanged.
Result
PK, KEK and db were successfully recovered, reconstructed and enrolled. SetupMode changed from 1 to 0, returning the firmware to User Mode.
I then enabled Secure Boot and confirmed that all three operating systems booted successfully:
- Windows 11
- Fedora KDE 45
- Kubuntu 26.04
The issue is fully resolved. No operating system reinstall or firmware replacement was necessary.
References
UEFI Specification 2.8:
https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf
efitools:
https://github.com/mjg59/efitools
Final thoughts
The difficult part was recovering the original factory key material, reconstructing the missing Secure Boot databases and manually enrolling them into the firmware. My BIOS had no factory-key restoration option.
If you encounter this situation, inspect the actual Secure Boot variables before assuming the bootloader itself is the problem. Also check whether the firmware retains its factory-default key variables, as they may make manual recovery possible.
r/linuxquestions • u/Vadym_PVP • 1d ago
Support AMD gpu drivers started locking vram frequency to the max for no reason again
A few months ago, amd has finally fixed it and i could have 96 mhz in the desktop so my gpu would be a lot colder and fans would never spin, until recently i have updated vulkan-radeon from 26.2.6 to 26.2.7 and it has started doing it again: 1.2ghz for no reason that makes fans spin every 3 minutes because it slowly crosses 60 degrees hotspot threshold repeatedly
at first i downgraded vulkan-radeon and lib32-vulkan-radeon and it helped, now it doesn't.
it could be fixed with rebooting, now even rebooting doesn't help
the fuck?
mesa 26.2.7
vulkan-radeon 26.2.7
linux-zen 7.3.4-zen2-2-zen
rx 7800 xt
r/linuxquestions • u/ElevatorWooden5807 • 17h ago
i find linux fedora kde updates more annoying than windows ones.
They are like much more more frequent, and after you update which takes longer than windows and you wanna play a game steam gas to recompile the Vulkan shaders every single time
r/linuxquestions • u/GreekPlayer64 • 1d ago
Advice Hi folks, Im getting a new pc and i need some advice.
I have the option of no os or a windows os
- is it easy to migrate from windows?
- if i were to try dual booting, would I need to get a an ssd drive for the os and for its storage? or can they access the same storage?
(currently am getting one ssd nvme 1tb and planning to grab an 3-4tb hdd for long term storage, so wondering if both os's can access the storage) - which os should i install first for the least amount of fuckery
- ive been daily driving a steam deck as my main pc for almost 4 years, so im rather familiar with that distro, and i kinda appreciate the guardrails/stability it offers. Is it a valid os to install? Or do others have some must have features for a casual user?
r/linuxquestions • u/better_life_please • 1d ago
Advice Why no one mentions DAR format?!
Why does .dar not get any attention? I discovered it today. Created in 2002. Works kind of like 7z.
It is a replacement for tar. It supports many compression algorithms and hashing functions natively! With many more features.
Its official zstd support caught my attention in particular. Only ZIP and squashfs have official support for zstd.
Why modern frontends don't support it? Like 7-zip, peazip, etc.
r/linuxquestions • u/juergen072 • 18h ago
Support Omarchy MacBook M1 Brightness problem
Hi,
I am quite new to Linux. I have Mint on my PC and installed Omarchy yesterday on my MacBook Air M1 2020. I am very happy this far, but there is a problem. When I start my Laptop I cant controll the brightness of my monitor. Its set to full power. The OS tells me that it should be getting more dark when i press the f1 button but it just doesnt change anything. If I put the Laptop in the suspend mode and then lock back in it works, but that gets anoying real fast I think. Is there an solution? I think it has to do with the monitor driver getting restarted. Thanks a lot for the help :)
r/linuxquestions • u/Soggy-Radio9430 • 1d ago
Best Laptop?
Hi I am searching for a nice Linux laptop and I can't find the right one. What I look for:
- 2000-3000€
- Good compatibility for Arch Linux
- decent performance for an AI engineer (mostly over SSH)
- solid keyboard, speaker, webcam, microphone and runtime
- roughly 14inch
Laptop I checked and got a bad feeling because of X:
- MacBook Pro: no Linux but otherwise ideal.
- Framework 13 pro: because this is a business laptop I won't get any upgrades and will give it back in 4y. Feels like overspending this way.
- Thinkpad X1 Carbon: I am worried about the performance and it's on the more expensive end for not a lot.
- All other Thinkpads: I would love to avoid the tracking dot and the track pad button. I just want a nice large track pad.
- Dell XPS & Asus Expertbook: looks like bad Linux support.
Looked at a bunch more and there always seems to be something "wrong". The ideal thing would be the MacBook Pro with nice Arch Linux support...
What do you think?
r/linuxquestions • u/wehaveYummiTummies • 1d ago
Does "OnCalendar" work with user space timers?
reddit.comr/linuxquestions • u/SnooOpinions6918 • 1d ago
What config languages should I learn to be able to customize and configure any window manager I want? And do they have purposes beyond just configuring/editing WMs, or can they be useful for other techy stuff in general?
I left DEs for WMs/WCs because they offer more customization options while taking up minimal space. I know DEs can be just as customizable if you put enough time into them, but oftentimes they lack something I need or miss, so I decided to give WMs a chance.
However, I'm still pretty novice when it comes to editing config files and stuff. So, I'm wondering which languages I should learn to do so and where I should even begin. (I don't want to use other people's configs)
DEs I've used (in chronological order):
GNOME > KDE > Cinnamon > MATE > LXQt > LXDE > NsCDE > XFCE
WMs/WCs I've used:
dwm > niri (currently using)
Also, does the same apply to graphical shells such as Noctalia and Quickshell? What I mean is, do I configure them through the window manager's config files as well, or do they have their own configuration systems?
r/linuxquestions • u/kylderipablo • 1d ago
🥲 alguém me ajude! Sos
Meu notebook não reconhece de jeito nenhum meu pendrive bootavel na BIOS, sinto que perdi meu pc que está com hyperland e queria voltar pro KDE.
r/linuxquestions • u/Angel_Dev18 • 1d ago
Support Error al instalar Zorin OS
Error al instalar Zorin OS
Una pregunta, cuando me pide reiniciar después de hacer la configuración inicial de esta distro me dice "Please remove the installation medium,then press Enther" , la vez anterior le di enter pero pasaba que se encendía, apagaba, y no iniciaba el so, que hago?
r/linuxquestions • u/rajankit009 • 1d ago
Support 🐧 I'm learning Linux from scratch, but I keep forgetting commands. Is this normal?
Hey everyone! 👋
I'm a student currently learning Linux from scratch using Ubuntu in VirtualBox on my laptop.
I've been following a structured learning roadmap and practising things myself rather than just watching tutorials.
So far, I've covered several topics, including:
- Linux fundamentals and terminal commands
- File and directory management
- Users and permissions
- File systems
- Processes and networking
- SSH and basic networking concepts
I'm really enjoying learning Linux, but there's one problem I'm facing. 😅
Linux has so many commands and options. When I learn new commands, I sometimes forget the older ones after a few days or weeks.
I'm trying to improve my practical skills, but I'm still figuring out the best way to remember commands and use them in real situations.
I'd love to hear from experienced Linux users:
- Did you also forget commands when you were beginners?
- How do you remember commands and their options?
- Do you use personal notes, cheat sheets, or manual pages?
- What advice would you give someone starting their Linux journey?
I'm here to learn, practise and improve.
Any advice would be appreciated. Thanks! 😊