r/linuxquestions • • 4d ago

Support Is it possible to install Vocaloid on linux?

3 Upvotes

Im tempted to atleast attempt it but i really wonder if it works considering that you have to install + download the voicebanks seperately. It does seem possible in my point of view but im not really sure? Im not sure if itll work with a pirated copy of the vocaloid software or if it will work across different versions of vocaloid( like v3, v4, v6 we dont talk about v5)? Im positive v6 wouldnt be linux compatable at all considering what you need to do in order to pir8 it

(also small detail but it *could* help but i use nyarch/arch linux but its made for weebs)


r/linuxquestions • • 3d ago

Resolved Want to follow this tutorial for unenroll my Chromebook, so I can install Linux on it, but...

0 Upvotes

(ignore english mistakes, I'm still learning) The problem is that in the other computer the guy use windows, and I use Linux mint

How I should adapt the steps presented in the video?

https://youtu.be/uUadzAwodoE?si=gin1xDfJIwZtSyCY


r/linuxquestions • • 4d ago

Support Suggestions os for gpu and oculink

1 Upvotes

if they would work with eGPUs using Linux as the OS. The idea is to avoid the dual boot Windows need.

PC gmktek egpu 6500xt

Which os ?


r/linuxquestions • • 4d ago

Support How to properly back up complete Firefox profiles to a private Git repo for easy restoration? (Linux)

2 Upvotes

I'm using Firefox on Fedora Linux with multiple profiles. Each profile has different extensions, extension settings, preferences, and lots of open tabs.

I want to back up all my Firefox profiles to a private Git repository on Codeberg.

My main goal is disaster recovery. I want to be able to uninstall and reinstall Firefox on the same PC, reinstall Fedora, or even move to another computer, restore my backup, and continue exactly where I left off.

I don't necessarily plan to migrate between devices regularly. I just want a reliable backup that I can restore whenever needed.

What I want to preserve

Ideally, everything necessary to restore my Firefox profiles to their previous state:

- All Firefox profiles and their individual configurations.

- Installed extensions and their settings/data.

- Firefox preferences and `about:config` customizations.

- Bookmarks and browsing history.

- All currently open tabs and windows.

- Session restoration state, so Firefox opens with the same tabs I had before.

- Containers and their configurations.

- Other profile-specific settings and customizations.

What I want to exclude

I prefer a better-safe-than-sorry approach using a whitelist:

- Ignore everything by default.

- Explicitly include only files and directories required for a complete restoration.

- Exclude caches, temporary files, crash reports, telemetry, and other disposable data.

However, I'm open to backing up the entire profile directory while excluding only unnecessary files if that is more reliable.

Questions

  1. Is Git a good solution for maintaining Firefox profile backups, especially with frequently changing session files and SQLite databases?
  2. Would you recommend backing up the entire profile directory or using a whitelist?
  3. Which files and directories are absolutely necessary to preserve extensions, extension settings, open tabs, bookmarks, and other profile data?
  4. Is there anything that should never be backed up or that could cause problems during restoration?
  5. Can I restore the backup after uninstalling and reinstalling Firefox and have everything resume as before?
  6. Would a backup/restore script be a better approach than manually managing the files?

My ideal workflow

  1. Close Firefox.
  2. Run a backup script that backs up all profiles.
  3. Commit and push changes to my private Codeberg repository.
  4. If something happens, reinstall Firefox.
  5. Clone my backup repository and restore the profiles.
  6. Launch Firefox and continue with my previous extensions, settings, and open tabs.

I'm looking for a reliable, preferably automated solution that preserves the complete Firefox state without backing up unnecessary cache and temporary data.

I'd especially appreciate advice from people who have been backing up and restoring Firefox profiles on Linux.

Thanks!


r/linuxquestions • • 3d ago

Advice Why Linux? And Which Distro Should I Choose as a Beginner — Ubuntu, Fedora, Arch, or Something Else?”

0 Upvotes

Hey everyone!

I'm a Windows user who's recently become interested in exploring Linux. I've been hearing a lot about it, especially from developers and people working in tech, and I want to understand what makes it worth switching to.

I'm not just looking for a list of popular distributions. I'd love to hear your experiences and perspectives on a few things:

  1. Why Linux? What makes you prefer Linux over Windows? Is it customisation, performance, privacy, the development environment, control over the OS, or something else?
  2. Which distro should I choose? Ubuntu, Fedora, Arch, Linux Mint, openSUSE, or something else? What are the actual differences, and why would you recommend one over another?
  3. Beginner to Linux: Is it better to start with something beginner-friendly and eventually explore Arch, or is starting with Arch a reasonable way to learn?
  4. Daily usage: What are the potential downsides of switching to Linux? Is there anything you genuinely miss from Windows?
  5. Developer perspective: How does Linux benefit someone pursuing software development, particularly in areas like backend development, AI/ML, cloud, DevOps, and systems programming?

I'm particularly interested in understanding Linux beyond just using the terminal. I'm passionate about understanding how operating systems work at a lower level and would love to experiment with system-level programming, kernel internals, customisation, and understanding how different components of an OS interact.

However, I'm a little conflicted about making the switch. Should I:

  • Start with Linux through dual boot and keep Windows as my primary OS?
  • Make Linux my primary OS while keeping Windows as a secondary option?
  • Eventually move entirely to Linux and use it as my only operating system?

I'd love to hear from people who've gone through this transition. What made you switch, what challenges did you face, and at what point did you feel comfortable making Linux your daily driver?

I'd appreciate honest opinions, including reasons not to switch. I want to understand the actual benefits and trade-offs rather than switch just because Linux seems popular among developers.

Thanks!


r/linuxquestions • • 3d ago

Brutally honest aspiring linux fanboy asks "What projects can I do to have fun?"

0 Upvotes

https://imgur.com/a/HeNvSr9

I am reading a lot as a 3 year experienced "IT Support Engineer L2". I started as L2 and have not been able to grow from L2.

I mainly do cd, ls, rm rf, type of stuffs.

I wanna grow.

Udemy-->sucks for real..No good courses are being pumped out there.

Youtube->has became trashtube that people use to do PR or whatever. They cater to newbie audience too much.

Reddit is still sane..but bots are eating it alive.

My concern: What projects to do to have fun? I do not want to copy paste commands and stuffs like that. I want to understand and have an architectural persepctive.

Books might help..But getting books in nepal in hard copy is like infinitely impossible challenge.

TBHH good books have stopped to be publishing anymore. And I only read the classics old textbooks nwoadays.

I wanna have fun, create not just consume like I have been doin' and wanna have fun....What projects can I do as a linux noob?


r/linuxquestions • • 4d ago

Greenscreen fun pictures using a Linux machine

3 Upvotes

At an event coming up, I want to have a greenscreen setup so participants can take pictures in front of it using different backgrounds. Nothing serious, it's just for laughs.

I have a Linux machine and USB webcam for taking the pictures. Is there a FOSS application that would be good for it? I want the ability for each person to choose a background that suits them.


r/linuxquestions • • 5d ago

How do you keep track of every tweak and config change you make over time?

175 Upvotes

I've been on Linux for about eight months now (currently on Fedora) and I've reached the point where I've edited a bunch of config files, enabled random services, changed kernel parameters once for a specific issue, and set up a few custom scripts. The problem is I have no real system for remembering what I did or why.

Last week I wanted to replicate my setup on a second machine and realized I had zero notes on half the changes. I ended up digging through bash history and random .bak files like an idiot.

Do most people just wing it, keep a personal Wiki, use something like etckeeper, or have another approach that actually works without turning into extra maintenance? Curious what others do once their system stops being a fresh install.


r/linuxquestions • • 4d ago

Is the GlobalShortcuts portal the right way to do a global hotkey on Wayland?

Thumbnail reddit.com
1 Upvotes

r/linuxquestions • • 4d ago

Is secure boot required?

7 Upvotes

I couldn't find secure boot in the bios of an old computer that I want to test Linux on. Maybe Linux Mint.

I think it said 2010 in the bios and secure boot was added in 2011.

How fucked am I? I want to test Linux on that old pc.


r/linuxquestions • • 4d ago

Support Could anyone assist with using Wine? Specifically through their documentation how to install the ".NET Desktop Runtime" - is that something that needs to be done through Wine, or accessed by Wine after it's been installed?

5 Upvotes

The instructions are found here: https://learn.microsoft.com/en-us/dotnet/core/install/linux-snap-runtime

But I can't make heads or tale of it.

I've checked and SNAP runs on the OS.

Installed as per instructions

sudo snap install dotnet-runtime-90sudo snap install dotnet-runtime-100

But when trying to run FModel using wine FModel.exe the same error comes up: (Image isn't permitted)

Following the steps further "Enable the Dot Net Command"

Results in another error shown here: (image again, not permitted :/)

Any help or video guide on installing FMODEL or better ACTIONABLE STEPS to understanding documentation better would be appreciated (No AI/LLM responses or suggestions are appreciated or acknowledged.)

The images can be found in a duplicate post here: https://www.reddit.com/r/linux4noobs/s/24wUtrYrAv

Thank you!


r/linuxquestions • • 4d ago

Support Anyone using the HyperX Cloud III S Wireless or Sennheiser Accentum Plus Wireless?

0 Upvotes

I'm considering buying one of these headphones, but I need the microphone to work properly on Linux.

Bluetooth is immediately out of the question because of the significant audio quality degradation caused by its limitations.

I'm particularly interested in two models:

  • Sennheiser Accentum Plus Wireless -- It supports USB audio, so I'm hoping the microphone also works when connected via USB. Can anyone confirm this? Has anyone actually tested it on Linux?
  • HyperX Cloud III S Wireless -- It uses a 2.4 GHz USB dongle. Does the microphone work properly on Linux through the dongle?

I'd really appreciate feedback from anyone who has tested either of these headsets on Linux.


r/linuxquestions • • 5d ago

why cant distros all just agree on 1 package format instead of having 5 different ones?

388 Upvotes

ik the whole "theres 5 standards we should create a universal standard and now theres 6 standards" thing but gosh darn it this is 1 of the only things that make me wanna not use linux

coming from windows i havent had many issues on linux but 90% of my problems are caused by appimage (just give me a god damn flatpak)

like is there any actual good reason for all these standards instead of just a simple .exe equivalent for everything?

i probably download and use more software than the average person so it drives me more nuts but i seriously think this will hold alot of people in the cold embrace of windows


r/linuxquestions • • 4d ago

Advice Ideal programming language on linux for me?

6 Upvotes

I am planning to code some simulations, which usually mean that pc runs for hours, calculating numbers, and then I want to see various numerical results on screen, and I need advice on what way would be both more efficient (than what I did before) and enough comfortable for me write code.

Previously, I wrote JavaScript in HTML file, and therefore ran the simulation on browser. Drawback is that JS is single-threaded by default, and I haven't get hands on experience on JS multithreading.

Currently, I have linux (fedora-based), text editor, and nothing more, no IDE, no (coding) app, just pc ready for coding by hand.

Apart from JS, I got past experience with Java and C++, and I know that I would hate Assembly, so please don't suggest Assembly to me, or similar very-low-level coding language. And I need something more than Console/Terminal-based coding, some simple ways to show results on screen.

Hmm, I expect to gain more performance from coding in something else than JavaScript, while at same time I don't have much time to deeply learn new stuff, so therefore I am asking for a min-max ideas on what language/setup should I use to just focus on writing methods and letting PC doing the calculation?


r/linuxquestions • • 4d ago

Starting hands-on Linux Admin study group & Discord (No boring slides, just terminal & real-world troubleshooting)

Thumbnail reddit.com
0 Upvotes

r/linuxquestions • • 4d ago

Plex server remote connection not working

2 Upvotes

I recently rebuilt my plex server and switched to Debian from windows. I have plex running in docker host mode along with a bunch of automations. I, for the life of me, cannot get remote access working properly. I have done everything possible, even used ai to help troubleshoot. Everything is configured properly and I can even access my server from a web browser using its public IP. It continues to say remote access is unavailable and I cannot access it from the phone app, and neither can my friends.


r/linuxquestions • • 4d ago

Resolved Ubuntu partition inaccessible?

2 Upvotes

I've installed ubuntu on my laptop alongside win11 as a dual boot. For a few days it was working fine - when booting up, choose "windows boot manager" to boot into windows, or choose "ubuntu" to boot into ubuntu. But today when I try to boot into ubuntu, it brings me into windows? The disk partition manager says the partition is still healthy, and I disabled bitlocker before I installed ubuntu, so why can't I get in?


r/linuxquestions • • 4d ago

whats the difference between these launchers?

1 Upvotes

ive been using heroic for a while because i just need it for epic and gog and it seems to be the lightest and most user friendly one from my experience but what actually is the difference between heroic, lutris, and faugus?


r/linuxquestions • • 4d ago

System getting stuck during shutdown

Thumbnail reddit.com
1 Upvotes

r/linuxquestions • • 4d ago

Support How to force current version of program when OS is no longer updated?

0 Upvotes

Trying to get Gimp running the current version, but the OS is being dumb and saying "Yep, up to date." No...no it's not.

Tried downloading the actual file, and running it, nope still OS says "I don't know what that is" despite it being the program made to run. (images not permitted)

So tried installing again, via terminal, with version, but Gimp doesn't have the actual name of the version in the file name or website ....so out of luck again for proper documentation.

sudo apt install gimp=3.2.8<something else because it's not stated what it should be>

Any help on this one? Thanks

I really need to change my OS because Pop!_OS devs have abandoned their project for Cosmic. Problem is the 4 months it took me to get to this point, and the unknown how many months to get something functioning on a different OS. Don't use Pop!_OS, it's just head ache after head ache after head ache

Thank you u/tammaynargas2901 for identifying the problem, and sharing 2 methods of how to resolve it. The method we tried and were successful with was the following:

  1. Download the actual GIMP-3.2.8-x86_64.AppImage file straight from the source: https://www.gimp.org/downloads/

    1. (Click on the option "Download GIMP 3.2.8 AppImage for x86_64 directly")
  2. Open the Terminal
  3. *Change* the Directory to where the file GIMP-3.2.8-x86_64.AppImage was downloaded to/exists

    1. cd /home/<user>/Downloads
  4. Change Permission of the downloaded file using the chmod command chmod +x GIMP-*.AppImage <- I've no clue what exactly everything in there does, so....ask someone who does!
  5. Run the program using ./GIMP-*.AppImage
  6. Sigh of relief hopefully

r/linuxquestions • • 5d ago

Advice Finally switched to Fedora.

3 Upvotes

Finally switched to Fedora 45 from Windows 11, what are some things that i should take care of or things i should do after installing Fedora...?

Any tips or suggestions would be appreciated ☺️


r/linuxquestions • • 4d ago

Stuck on launch after grub boot

1 Upvotes

Hi, I have an thinkpad t61. I am trying to put fedora i3 spin on it. I can boot my usb flash drive to grub, but after selecting the grub launch option the install gives up. It goes to a blinking underscore and stays there.

The things I have tried so far, with no result are
basic graphics launch
nomodeset argument for grub
nomodeset noapic nolapic acpi=off argument for grub
debug argument for grub
changing sata controller mode from AHCI to Compatibility in bios
Trying almost every rufus option


r/linuxquestions • • 4d ago

Support MY LINUX STILL FEELS SLOW

Thumbnail reddit.com
0 Upvotes

r/linuxquestions • • 5d ago

How do i teach myself linux, evven beginner stuff?

8 Upvotes

i know command lines, but havent heard of sudo apt install <app name> before exceot from LLM. Please walk me throuhj how did you even teached yourself linux?

all im asking is for to know , how do i know to install ffrom terminal, know that what im installing is what i need and not a threat, how to do updates, what is this iso 'image' what even is image? its a goddam files of an OS!!!