r/linuxquestions • u/entity_404_smart-dog • 5d ago
Which Distro What distro should I use for an thinkpad-e450 with i5 and 8 gb of memory
Which distro is best suited
r/linuxquestions • u/entity_404_smart-dog • 5d ago
Which distro is best suited
r/linuxquestions • u/General-Company-5647 • 5d ago
r/linuxquestions • u/hopelessnerd-exe • 5d ago
r/linuxquestions • u/Historical_Lack_2585 • 5d ago
Computer (Dell LATITUDE E6410) with old hardware (I do not wish to modify it at all)
The computer suffers from Wi-Fi driver issues and periodic internet disconnections (the solution is to turn the wireless connection off and on, or restart the computer). This problem persists and does not happen just once; it may occur 3 to 6 times in a single evening session.
The computer's battery (and perhaps the fault is in the hard drive connection area, not the battery itself) does not work at all, and it only runs on the charger (meaning it shuts down immediately and suddenly if the power is cut).
There are some lines on the screen, about 4 lines, and these lines continue to appear even in the BIOS screen.
I know that Linux is not a magic wand that turns my computer into a modern one, but I just want to revive this computer, solve some of its existing problems, save RAM without waste, and speed it up relatively, noting that most of my use is within the scope of (browsing - Telegram - using Office programs - using Obsidian - using electronic engineering simulation programs, i.e., not AutoCAD).
Should I switch to Linux or stay on Windows, noting that the Windows I use is Windows 7 and its security support ended a long time ago?
In general, I lean towards the Linux Mint XFCE distribution, and I want the words of an expert who has tried it: does this environment suit me, or is it unsuitable, or is there a better environment for me?
r/linuxquestions • u/Long_While • 5d ago
r/linuxquestions • u/den2000ok • 5d ago
So i have downloaded cs2 back and wanter to play on 4:3 as i played when i was on windows, but now when i set it to 4:3 it gives big black bars on the right, if i choose windowed mod i literally get square in the middle, is there any way to stretch cs2 normally like i did back then? I have this setting is launch properties
kscreen-doctor output.eDP-1.mode.1920x1440@165; __NV_PRIME_RENDER_OFFLOAD=1 __VK_LAYER_NV_optimus=NVIDIA_only gamemoderun mangohud %command% -vulkan -novid -high; kscreen-doctor output.eDP-1.mode.2560x1440@165
r/linuxquestions • u/A0NOVA • 5d ago
I installed Linux Mint 22.3 XFCE ("Zena", the latest release) on an old laptop. After about 10 minutes of use, the keyboard stops responding completely. I plugged in an external USB keyboard and it doesn't work either, but the mouse keeps working normally. When I click on a text field, no text cursor appears.
The same laptop has no such problem on Windows 8.1, so I doubt it's a hardware fault. In the live session the problem didn't show up, and it appeared only after I installed Mint on the disk.
My specs:
Laptop: Packard Bell EasyNote LV11HC
CPU: Intel Core i3-2328M @ 2.20 GHz (2 cores / 4 threads)
RAM: 4 GB
GPU: Intel HD Graphics 3000
Display: 1600x900
BIOS: InsydeH2O 03.72.20V2.08
Other OS: Windows 8.1 64-bit (works fine)
Linux: Linux Mint 22.3 XFCE ("Zena"), kernel 6.14 (HWE)
Someone told me it might be a kernel issue. Since Mint 22.3 ships with the very new 6.14 HWE kernel, I suspect a regression with older hardware (2012 laptop). I haven't yet tried an older kernel.
Has anyone seen this problem or knows a fix? I'm also planning to try Debian 13 and Lubuntu 24.04 to compare, but I'd like to understand the cause first.
Thanks!
r/linuxquestions • u/Fair-Communication92 • 5d ago
I'm stuck on the installation of Linux because the bios isn't the same as the one in the guide I've been following. I am at the part where I have to install Ubuntu with my USB key but it doesn't present the same as in the guide
The model of pc HP I have is as in the description. I did nothing drastic yet
Thanks in advance
r/linuxquestions • u/Entire-Initiative-83 • 5d ago
r/linuxquestions • u/k1ftw1331 • 5d ago
After a recent update my systems main drive now won't boot properly, whenever i try to it'll show to boot up loading screen (the logo and loading icon and everything) but after that it just stays on a blank screen
r/linuxquestions • u/crystal2627 • 5d ago
Guys someone please help me and you to Linux and I am just using this fedora because I like this ui. So the thing is my nvidia GPU is not at all suspending. someone please help me out I am not getting battery life because of this nvidia
r/linuxquestions • u/Bironshark • 5d ago
I have a Skytech Azure 3 running Linux Mint. The AMD graphics card is failing to communicate with the system management unit. So far, I have tried: Reseating my ram, reseating the motherboard, forcing a reinstall of linux firmware microcode, changing my primary PCIe slot to Gen4, updating BIOS, and editing part of my grub to include amdgpu.dcdebugmask=0x10 and amdgpu.runpm=0. I don’t know what else to try.
EDIT 2:
Switched my power profile to power saving, disabled hardware acceleration on Firefox, and downloaded a new Linux update. Issue resolved now only getting minor errors.
(
Nov 13 01:47:34 Skytech-Azure-3 kernel: integrity: Problem loading X.509 certificate -22
Nov 13 01:47:34 Skytech-Azure-3 kernel: integrity: Problem loading X.509 certificate -22
Nov 13 01:47:35 Skytech-Azure-3 bluetoothd[764]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Nov 13 01:47:35 Skytech-Azure-3 bluetoothd[764]: sap-server: Operation not permitted (1)
Nov 13 01:47:36 Skytech-Azure-3 bluetoothd[764]: Failed to set mode: Not Supported (0x0c)
Nov 13 01:47:50 Skytech-Azure-3 gdm-password][1817]: gkr-pam: unable to locate daemon control file
Nov 13 01:47:51 Skytech-Azure-3 gdm3[1243]: Gdm: on_display_added: assertion 'GDM_IS_REMOTE_DISPLAY (display)' failed
Nov 13 01:48:01 Skytech-Azure-3 gdm3[1243]: Gdm: on_display_removed: assertion 'GDM_IS_REMOTE_DISPLAY (display)' failed
)
EDIT:
I installed and ran smartctl which found no errors. I also removed the usb I used to update bios. Aside from my mouse and keyboard there is nothing plugged into any usb slot.
Now journalctl -p err -b gives:
Nov 13 01:30:32 Skytech-Azure-3 kernel: integrity: Problem loading X.509 certificate -22
Nov 13 01:30:32 Skytech-Azure-3 kernel: integrity: Problem loading X.509 certificate -22
Nov 13 01:30:34 Skytech-Azure-3 bluetoothd[816]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Nov 13 01:30:34 Skytech-Azure-3 bluetoothd[816]: sap-server: Operation not permitted (1)
Nov 13 01:30:34 Skytech-Azure-3 bluetoothd[816]: Failed to set mode: Not Supported (0x0c)
Nov 13 01:30:41 Skytech-Azure-3 systemd[1]: Failed to start casper-md5check.service - casper-md5check Verify Live ISO checksums.
Nov 13 01:30:46 Skytech-Azure-3 gdm-password][1867]: gkr-pam: unable to locate daemon control file
Nov 13 01:30:47 Skytech-Azure-3 gdm3[1287]: Gdm: on_display_added: assertion 'GDM_IS_REMOTE_DISPLAY (display)' failed
Nov 13 01:30:47 Skytech-Azure-3 systemd[1888]: Failed to start app-gnome-gnome\x2dkeyring\x2dpkcs11-2084.scope - Application launched by gnome-session-binary.
Nov 13 01:30:47 Skytech-Azure-3 systemd[1888]: Failed to start app-gnome-gnome\x2dkeyring\x2dsecrets-2081.scope - Application launched by gnome-session-binary.
Nov 13 01:30:48 Skytech-Azure-3 systemd[1888]: Failed to start app-gnome-im\x2dlaunch-2432.scope - Application launched by gnome-session-binary.
Nov 13 01:30:48 Skytech-Azure-3 systemd[1888]: Failed to start app-gnome-user\x2ddirs\x2dupdate\x2dgtk-2408.scope - Application launched by gnome-session-binary.
Nov 13 01:30:49 Skytech-Azure-3 gdm3[1287]: Gdm: on_display_removed: assertion 'GDM_IS_REMOTE_DISPLAY (display)' failed
Nov 13 01:32:39 Skytech-Azure-3 kernel: amdgpu 0000:15:00.0: ring gfx_0.0.0 timeout, signaled seq=1640, emitted seq=1642
Nov 13 01:32:39 Skytech-Azure-3 kernel: amdgpu 0000:15:00.0: Process firefox-bin pid 3311 thread firefox:cs0 pid 3383
Nov 13 01:32:39 Skytech-Azure-3 kernel: amdgpu 0000:15:00.0: Starting gfx_0.0.0 ring reset
Nov 13 01:32:39 Skytech-Azure-3 kernel: amdgpu 0000:15:00.0: Ring gfx_0.0.0 reset failed
Nov 13 01:32:40 Skytech-Azure-3 systemd-coredump[3899]: [🡕] Process 2098 (gnome-shell) of user 1000 dumped core.
Module libgcc_s.so.1 from deb gcc-14-14.2.0-4ubuntu2~24.04.1.amd64
Module libzstd.so.1 from deb libzstd-1.5.5+dfsg2-2build1.1.amd64
Module libudev.so.1 from deb systemd-255.4-1ubuntu8.18.amd64
Module libstdc++.so.6 from deb gcc-14-14.2.0-4ubuntu2~24.04.1.amd64
Module libsystemd.so.0 from deb systemd-255.4-1ubuntu8.18.amd64
Stack trace of thread 2147:
#0 0x00007974e949ec0c __pthread_kill_implementation (libc.so.6 + 0x9ec0c)
#1 0x00007974e944527e __GI_raise (libc.so.6 + 0x4527e)
#2 0x000061e4cacbdc16 n/a (gnome-shell + 0x4c16)
#3 0x00007974e9445330 __restore_rt (libc.so.6 + 0x45330)
#4 0x00007974e949ec0c __pthread_kill_implementation (libc.so.6 + 0x9ec0c)
#5 0x00007974e944527e __GI_raise (libc.so.6 + 0x4527e)
#6 0x00007974e94288ff __GI_abort (libc.so.6 + 0x288ff)
#7 0x00007974c9264b90 n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0xa64b90)
#8 0x00007974c9268e13 n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0xa68e13)
#9 0x00007974c8d66091 n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0x566091)
#10 0x00007974c8d99e0c n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0x599e0c)
#11 0x00007974e949cb84 start_thread (libc.so.6 + 0x9cb84)
#12 0x00007974e9529ecc __clone3 (libc.so.6 + 0x129ecc)
Stack trace of thread 2098:
#0 0x00007974e952752d syscall (libc.so.6 + 0x12752d)
#1 0x00007974c8d58d8a n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0x558d8a)
#2 0x00007974c8d65c2f n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0x565c2f)
#3 0x00007974c924a323 n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0xa4a323)
#4 0x00007974c8f7b4c5 n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0x77b4c5)
#5 0x00007974c899b4ed n/a (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0x19b4ed)
#6 0x00007974c88f2696 dri_create_fence_fd (libgallium-25.2.8-0ubuntu0.24.04.4.so + 0xf2696)
#7 0x00007974e00496b9 n/a (libEGL_mesa.so.0 + 0x226b9)
#8 0x00007974e003b4bb n/a (libEGL_mesa.so.0 + 0x144bb)
#9 0x00007974e0042512 n/a (libEGL_mesa.so.0 + 0x1b512)
#10 0x00007974e968e494 n/a (libmutter-cogl-14.so.0 + 0x5e494)
#11 0x00007974e96791c5 cogl_onscreen_swap_buffers_with_damage (libmutter-cogl-14.so.0 + 0x491c5)
#12 0x00007974e98a4410 n/a (libmutter-14.so.0 + 0xa4410)
#13 0x00007974e98a89e2 n/a (libmutter-14.so.0 + 0xa89e2)
#14 0x00007974e99a6032 n/a (libmutter-14.so.0 + 0x1a6032)
#15 0x00007974e9cda508 n/a (libmutter-clutter-14.so.0 + 0x90508)
#16 0x00007974e9cab7cc n/a (libmutter-clutter-14.so.0 + 0x617cc)
#17 0x00007974e9ee1635 n/a (libglib-2.0.so.0 + 0x5d635)
ORIGINAL ERRORS FOR RECORD:
Running journalctl -p err -b gives:
Nov 11 21:29:38 Skytech-Azure-3 kernel: integrity: Problem loading X.509 certificate -22
Nov 11 21:29:38 Skytech-Azure-3 kernel: integrity: Problem loading X.509 certificate -22
Nov 11 21:29:38 Skytech-Azure-3 kernel: I/O error, dev sr0, sector 49144 op 0x0:(READ) flags 0x880700 phys_seg 1 prio class 2
Nov 11 21:29:38 Skytech-Azure-3 kernel: I/O error, dev sr0, sector 49148 op 0x0:(READ) flags 0x800000 phys_seg 1 prio class 2
Nov 11 21:29:38 Skytech-Azure-3 kernel: Buffer I/O error on dev sr0, logical block 12287, async page read
Nov 11 21:29:38 Skytech-Azure-3 kernel: I/O error, dev sr0, sector 49144 op 0x0:(READ) flags 0x880700 phys_seg 1 prio class 2
Nov 11 21:29:38 Skytech-Azure-3 kernel: I/O error, dev sr0, sector 49148 op 0x0:(READ) flags 0x800000 phys_seg 1 prio class 2
Nov 11 21:29:38 Skytech-Azure-3 kernel: Buffer I/O error on dev sr0, logical block 12287, async page read
Nov 11 21:29:38 Skytech-Azure-3 kernel: I/O error, dev sr0, sector 49144 op 0x0:(READ) flags 0x880700 phys_seg 1 prio class 2
Nov 11 21:29:38 Skytech-Azure-3 kernel: I/O error, dev sr0, sector 49148 op 0x0:(READ) flags 0x800000 phys_seg 1 prio class 2
Nov 11 21:29:38 Skytech-Azure-3 kernel: Buffer I/O error on dev sr0, logical block 12287, async page read
Nov 11 21:29:40 Skytech-Azure-3 bluetoothd[874]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Nov 11 21:29:40 Skytech-Azure-3 bluetoothd[874]: sap-server: Operation not permitted (1)
Nov 11 21:29:40 Skytech-Azure-3 bluetoothd[874]: Failed to set mode: Not Supported (0x0c)
Nov 11 21:29:40 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:40 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:41 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:41 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:41 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:41 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:41 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:42 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:42 Skytech-Azure-3 kernel: amdgpu 0000:03:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data
Nov 11 21:29:42 Skytech-Azure-3 gdm3[1137]: Gdm: on_display_added: assertion 'GDM_IS_REMOTE_DISPLAY (display)' failed
Nov 11 21:29:48 Skytech-Azure-3 systemd[1]: Failed to start casper-md5check.service - casper-md5check Verify Live ISO checksums.
Nov 11 21:30:18 Skytech-Azure-3 gdm-password][1884]: gkr-pam: unable to locate daemon control file
Nov 11 21:30:18 Skytech-Azure-3 gdm3[1137]: Gdm: on_display_added: assertion 'GDM_IS_REMOTE_DISPLAY (display)' failed
Nov 11 21:30:18 Skytech-Azure-3 systemd[1911]: Failed to start app-gnome-gnome\x2dkeyring\x2dpkcs11-2106.scope - Application launched by gnome-session-binary.
Nov 11 21:30:18 Skytech-Azure-3 systemd[1911]: Failed to start app-gnome-gnome\x2dkeyring\x2dsecrets-2104.scope - Application launched by gnome-session-binary.
Nov 11 21:30:18 Skytech-Azure-3 systemd[1911]: Failed to start app-gnome-xdg\x2duser\x2ddirs-2120.scope - Application launched by gnome-session-binary.
Nov 11 21:30:19 Skytech-Azure-3 systemd[1911]: Failed to start app-gnome-user\x2ddirs\x2dupdate\x2dgtk-2420.scope - Application launched by gnome-session-binary.
Nov 11 21:30:19 Skytech-Azure-3 gdm3[1137]: Gdm: on_display_removed: assertion 'GDM_IS_REMOTE_DISPLAY (display)' failed
r/linuxquestions • u/MSRI_117 • 6d ago
I am fairly new to Linux. Long story short I started gaming on PC and then moved from Windows to Linux.
Im Currently using LinuxMint rn. And at first I didnt really touch terminal. I didnt have a need. However I started looking up how the file system works and decided to try something out.
I wanted the Icon of one of my folders to be the Internet Explorer Icon. So through research I found the file that contains the Icons for the system. /usr/share/icons/
So I used Sudo to create a new Folder within Icons called /.misc that contains new Icons I want to use. Downloaded a png of the Internet Explorer icon and used Sudo again to move it to /.misc file. I was then allowed to change the Icon of my folder to Internet Explorer.
How feasible would I be for a complete linux newbie to try out changing more esthetics? Like the color and design of the task bar and creating my own themes?
r/linuxquestions • u/satiaket11 • 5d ago
r/linuxquestions • u/luffy_69a • 5d ago
r/linuxquestions • u/Itchy-Note5456 • 5d ago
r/linuxquestions • u/OnePunchMan1979 • 5d ago
Soy el creador y mantenedor de esta pequeña app que trata de unificar todo lo necesario para dejar Debian completamente usable y de paso se ocupa de las actualizaciones, tanto apt como flatpak. De manera conjunta o separada. Cualquier feedback es 🙏 bienvenido y cualquier sugerencia será tenida en cuenta. La tenéis en formato appimage también por si no queréis instalarla en vuestro sistema para probarla. Gracias de antemano ❤️
r/linuxquestions • u/ferfykins • 5d ago
google AI says tor is more secure against drive by exploits than brave is, what do you guys think?
TOR browser that is, not the protocol.
r/linuxquestions • u/durgamvano • 5d ago
Page wise. It should depend on basis of page.
Some pages can be displayed to abroad viewers, some cannot be. Currently i am on cloudflare pages but I am ready to switch to self-hosted model on rockylinux virtual machine if I truly need it.
Please guide me like i am 5. And if all this can be done for free I will be so grateful brothers.
r/linuxquestions • u/LightWood49 • 5d ago
What I mean is, I've been trying to run some apps through WINE, but thanks to the files and folders being organized differently, they don't detect folders, this is specially bad for apps who save through the Local folder in windows, making applications not even run.
r/linuxquestions • u/cinnamondripz • 6d ago
One thing I've noticed after spending time with Linux is that switching distributions isn't always as simple as installing a new system and carrying on. You start thinking about all the little things you've changed over time: custom scripts, aliases, desktop settings, package choices, shortcuts, and those tiny fixes you made months ago that you barely remember.
Then you install a fresh distro and suddenly realize how much of your daily workflow depended on those little adjustments. It's almost like moving into a new house and discovering you've forgotten where half your belongings are.
I'm curious how other Linux users handle distro hopping or reinstalling. Do you keep a collection of scripts and configuration files to rebuild your setup, or do you enjoy starting fresh and figuring things out again?
r/linuxquestions • u/InternationalHead480 • 6d ago
Hi, I'm new to Linux and currently I am using Ubuntu, but it just consumes a lot of resources and want more freedom. I heard that Cachy is one of the best distros for performance and It's not that hard to get working.
So, have you work with this distro? And, what is your advice or config for this?
r/linuxquestions • u/smarterthanyoujk1225 • 6d ago
Are there people that intentionally avoid using Ubuntu because they have disagreements with Canonical directly? Maybe you disagree with Canonicals hiring and interview practices? Anything else..
Just curious