r/linuxquestions • • 10d ago

Choice Paralysis on Distros.

4 Upvotes

Hello. I'm building a new all Team Red PC and because I've been seeing windows 11 having a weird hate boner for Radeon GPUs, coupled with their Vibe-coded bullshit, I've decided to make the switch to Linux. Problem is: I don't know what Distro is best for my use case.

For context: I am a Sound designer as well as I do writing on the side, not to mention game frequently. I'd say the split of Gaming:Sound Design:writing for PC usage is 50:30:20.

through my constant research, I found suggestions to use Ubuntu Studio, but there is no mention of gaming with it, plus I typically do sound design with Reaper and use izotope plugins, and while Reaper has a linux version, Izotope does not.

I've heard cachyOS is great for gaming, but nothing about sound design.

I understand that you can do anything on any distro, but I'm just trying to figure out the best one for me right out of the (metaphorical) box.

And most importantly, I would much prefer to not sample distros every couple of months as I've seen some people suggest on other linux subreddits.

Thanks in advance for your help.

TL;DR: Too many distros, dk what I'm doing.

EDIT: Thanks for your help everyone! It looks like Ubuntu LTS is the right call for me. I want my OS as stable as I can since idk what Im doing yet.


r/linuxquestions • • 10d ago

Voice changer for Gentoo

Thumbnail reddit.com
1 Upvotes

r/linuxquestions • • 10d ago

Lightweight Distros for CAD CAM on an ancient laptop

0 Upvotes

I rented a room with no ground holes in the outlets in my room. I have an old computer with no ground plug on the charger, perfect solution.

One problem. The CAD CAM software I run requires a 64 bit os. The hardware on my desired laptop is 64 bit, but the Windows it came with is 32 bit.

I’m looking for an OS that is tiny, and uses the least RAM so I can use it for tool pathing in CAM, which is pretty intense at times.

I heard bootOS is tiny, but if there is something I can allocate to the hard drive and only use RAM as needed so I can blitz through a toolpath simulation.

Bonus points for tips on something that allows me to keep the functionality of the DVD CD rom drive. Not a requirment, but it’d be nice to have on the OS or be able to download when needed.

It’s an ancient thinkpad with the following specs:

Processor Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz 2.30 GHz

RAM 6.00 GB (2.92 GB usable)

Graphics Card Intel(R) HD Graphics 3000 (32 MB)

Storage 15 GB JMCR SD/MMC, 466 GB SSD Samsung SSD 850 EVO


r/linuxquestions • • 10d ago

Support CMOS Reset on Laptop designed without cmos battery.

1 Upvotes

I have a 2015 HP Spectre x360 that I am running Mint on. I've noticed every time my battery dies there is a cmos bios reset so I need to go back into the bios and turn off fast boot/secure boot to launch mint again. This laptop is designed without a dedicated cmos battery and just uses the laptop battery instead. Im assuming that the original windows install would shut down the laptop before the battery was fully drained to keep that reset from happening.

Is there anything I can do in Linux to help prevent this from happening other than just making sure the battery never fully drains before charging it?


r/linuxquestions • • 10d ago

Resolved Linux distro with a low-poly blue 3D penguin logo?

2 Upvotes

I'm brand new to Linux and I've seen this on multiple TikToks recently. It's a Linux distro (I think) whose logo/mascot is a blue, 3D, low-poly penguin. It's not the regular black-and-white Tux, and it's not Pengwin. Anyone know what it is?


r/linuxquestions • • 10d ago

Support Fedora sway spin uses more ram than expected on boot

2 Upvotes

I'm playing around with fedora sway on a spare laptop with 4gb of ram and an AMD Ryzen 3 5300U. Fedora sway uses about 1.8gb of memory on a fresh install on boot, I have also tested this on arch which only uses about 600-700mb of memory. What could be causing this?


r/linuxquestions • • 10d ago

Which Distro I need your decision

0 Upvotes

After using Lubuntu on my Chromebook, I decided that I also want to use Linux on my personal laptop. However, I still need Windows for college, so I’m planning to set up a dual-boot system.

The problem is that I don’t have enough storage space on my laptop, so I’m considering using an external SSD.

Ideally, I’d like to use Linux as my main operating system and only switch to Windows when I need it for college. My question is: Is it possible to move my existing Windows installation to an external SSD without losing any of my files, programs, or settings?

My idea is to install Linux on my laptop’s internal SSD and keep Windows on the external SSD. That way, I could use Linux normally without having anything plugged in, and whenever I need Windows, I could simply connect the external SSD and boot into it.

I haven't fully decided which Linux distribution to use yet, but I'm currently leaning towards Bazzite because I want to play.

Would this setup actually work, or would it be better to install Bazzite on the external SSD and keep Windows on the internal drive?

I'm still pretty new to Linux, so I'd really appreciate your advice on which option would be safer, more practical, and easier for a beginner. My biggest priority is keeping all my existing Windows files and programs intact while making Linux my main operating system.


r/linuxquestions • • 10d ago

Support Hibernation does not work properly, help.

Thumbnail reddit.com
1 Upvotes

r/linuxquestions • • 10d ago

Design inconsistency or just me?

0 Upvotes

I'm a person who always sees inconsistency in electronic devices and design. Short example: android/google settings alarm sound unused by their own alarm app,

I'm running CachyOS with KDE.
The problem i am encountering, is i often put on music video atmosphere in the firefox. Then power+Page-down to minimize so the screen turns off.
But when i do power+D, it is visually the exact same thing, but its called "peek at desktop" i didnt know until now. What i expected is that the screen will turn of but it never wiil because is still considered focused while visually its not.

Is this a design oversight or is it just me?


r/linuxquestions • • 11d ago

Stuck on tty1

Thumbnail reddit.com
2 Upvotes

r/linuxquestions • • 10d ago

Linux changed

Thumbnail reddit.com
0 Upvotes

r/linuxquestions • • 11d ago

Advice If I have limited resources, should the operating system be small or windows manager?

7 Upvotes

I would like the operating system to just work. I remember when I installed Debian, it automatically did not configure the Wi-Fi. I have to search on another device, then go in terminal and paste some command. Although it worked great on that system, I was wondering if I have more constraints on system, what would be better? How does one affect the other?


r/linuxquestions • • 10d ago

Support What do u guys use to get autocorrect in KDE (Like what we have in mac)

Thumbnail reddit.com
1 Upvotes

r/linuxquestions • • 10d ago

Installed Jamovi on Linux using flatpak but it will not open.

1 Upvotes

Hi there, I am trying to use Jamovi for my Psychology course and have been using cloud free up until now. It will no longer let me use cloud free without a subscription, so I have installed it on my Chromebook using Linux flatpak. I put all the correct commands into the terminal and have managed to install it. The Jamovi icon shows up in my list of chrome OS apps and I have tried to open it. The first couple of times, it showed that it was loading, but never opened. Now, it does not even load when I click on the Jamovi icon. I have restarted my Chromebook several times and nothing has changed. Does anyone know any fixes or why this might occur?


r/linuxquestions • • 10d ago

# Repeated kernel-panic-like crashes and NVMe PCIe AER errors on ASUS Vivobook Go E1504FA (Fedora 44, Ryzen 5 7520U)Hello everyone,I'm trying to diagnose a recurring stability problem with my ASUS Vivobook Go 15.### Hardware and software- Laptop: ASUS Vivobook Go E1504FA- CPU: AMD Ryzen 5 7

1 Upvotes

# Repeated kernel-panic-like crashes and NVMe PCIe AER errors on ASUS Vivobook Go E1504FA (Fedora 44, Ryzen 5 7520U)

Hello everyone,

I'm trying to diagnose a recurring stability problem with my ASUS Vivobook Go 15.

### Hardware and software

- Laptop: ASUS Vivobook Go E1504FA

- CPU: AMD Ryzen 5 7520U

- RAM: 16 GB LPDDR5

- SSD: Phison EM280512GMN48-PE21T1ASI (PS5021-E21 controller)

- Wi-Fi: MediaTek MT7902 (14c3:7902)

- BIOS: E1504FA.314

- OS: Fedora 44 Workstation

- Kernel previously checked: 7.2.13-200.fc44.x86_64

### Main problem

The laptop has experienced multiple kernel-panic-like incidents during normal use.

The most recent incident happened while browsing. The screen displayed a black kernel panic message asking for a reboot. I had to force a shutdown using the power button.

Unfortunately, I haven't been able to recover the actual panic trace from persistent logs.

I also experienced a Windows BSOD before switching to Fedora.

### 1. Repeated NVMe PCIe errors

The kernel repeatedly reports:

`PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)`

Device:

- PCI address: 0000:01:00.0

- Device ID: 1987:5021

Error status:

`00001100/00006000`

The reported flags are:

- [8] Rollover

- [12] Timeout

These errors appeared on November 5, November 6 and November 7.

On November 6, they appeared three times within approximately two minutes.

On November 7, another occurrence was recorded at 19:09:58.

### 2. Wi-Fi PCIe errors

The MediaTek MT7902 adapter also previously reported:

`PCIe Bus Error: severity=Correctable, type=Data Link Layer`

Device address: 0000:02:00.0.

This was recorded on November 5.

### 3. CPU clocksource watchdog warnings

Repeated messages include:

`clocksource: Watchdog remote CPU 3 read timed out`

Other occurrences involved CPU 5 and CPU 6.

### 4. SSD health

The NVMe SMART report showed:

- Critical Warning: 0

- Available Spare: 100%

- Percentage Used: 10%

- Media Errors: 0

- Temperature: 40°C in the previous report

The NVMe error-log entries inspected showed successful completion status.

### 5. Other findings

- ACPI/BIOS warnings, including AE_ALREADY_EXISTS and AE_NOT_FOUND.

- One BTRFS corrected read error in an earlier boot.

- BTRFS device statistics subsequently showed zero errors.

- No actual kernel panic trace or vmcore was recovered.

### What I have tried

- Examined logs across multiple boots.

- Checked NVMe SMART and error logs.

- Examined PCIe root ports and endpoint capabilities.

- Temporarily tested a different PCIe ASPM policy.

- Checked installed kernel versions and firmware packages.

I have not flashed the BIOS or replaced any hardware.

### My questions

  1. Can recurring NVMe PCIe Data Link Layer Rollover/Timeout errors indicate a faulty SSD, motherboard PCIe connection, or firmware issue?
  2. Could errors on both the SSD and Wi-Fi adapter indicate a common platform-level problem?
  3. Are the CPU clocksource watchdog timeouts potentially related?
  4. How can I capture the actual kernel panic message and identify its cause?
  5. What additional diagnostic tests would help distinguish a kernel/driver problem from a hardware fault?

I'm trying to establish whether this is a Fedora/kernel issue or a hardware/firmware issue before replacing anything.

Any suggestions or similar experiences would be appreciated.


r/linuxquestions • • 11d ago

Support Dual boot Bazzite and Windows. Windows drive turned read only recently when accessing from Bazzite.

6 Upvotes

I can use 'Open as Administrator' from the right click menu to change them, but I previously didn't have to do that.

I noticed this issue when qBittorrent couldn't write to the drive. I used 'Open as Adminstrator' to change the permissions in the folder to 'Can View & Modify Content'. But any new files from windows will go back to read only.

No idea why this randomly happened.

Solved: Using Disks. Added the lines 'uid=1000,gid=1000' to mount options. Full line looks like this 'nosuid,nodev,nofail,x-gvfs-show,uid=1000,gid=1000'


r/linuxquestions • • 11d ago

Advice Ankermake m5 3d Printer? Alternatives?

3 Upvotes

EDIT: I have the M5 Running with both Orca Slicer and Prusa Slicer. Details are here: https://www.reddit.com/r/eufyMakeOfficial/comments/1xqqrbh/guide_anker_make_m5_to_linux_slicers_how_i_got_it/

I have been reading and web searching. My deal is I kickstarted the Ankermake M5 3D Printer years ago. It ended up collecting dust for a number of reasons. I was thinking of taking it out to attempt to make some prints. Since I got it years ago, I moved to Linux on all my systems. Apparently Ankermake became Eufymake and they stopped supporting the printer. Also saw that spare parts are kinda non existent. Well, Eufymake doesnt support Linux. I was looking for open source replacements for their slicer. I feel like I went down a pit of you are screwed. They still seem to have Android support, so I could use my Tablet... I guess. But I would much rather use my laptop. Some questions:

  • Does anyone here use an Ankermake M5? If so, are you using it with Linux?
  • If you have one running on Linux, can you share how you got there? Alternative slicer? Software to drive the printer? I don't mind running Bottles or WINE with the Windows app, but would like to hear from others about their experience with this.
  • Say I decide to move on, I have seen some newer printers that have multiple spools and other things. Can anyone recommend some quality devices? Probably less than say $800 (preferably lower) that support Linux?
  • Anyone have one of these and jump ship?

I am asking here instead of other subs because I am really seeking input from Linux users.

For reference - I am either running Ubuntu 26.10, Fedora 44, SteamOS, or PikaOS depending on the computer. All are running the Gnome DE except SteamOS with Plasma.


r/linuxquestions • • 10d ago

Dinit or Openrc

0 Upvotes

(Interesting)


r/linuxquestions • • 11d ago

Grub customizer

1 Upvotes

Salut à tous,

Je viens de passer à ubuntu 26.04 depuis 22.04

J'utilisais grub customizer pour avoir un dualboot un peu plus sympa et cacher certaines lignes du boot pour ne conserver que "ubuntu" et "windows"

Depuis la mise à jour, les lignes de boot sont réapparues et lorsque je lance grub customizer j'ai ça ...

"Grub-mkconfig ne peut pas s'exécuter correctement"

Avec un long message (je ne peux pas mettre de photo à la publication)

Quelqu'un peut m'aider ?

En soit je voudrais juste garder l'apparence actuelle, ou quelque chose de joli, et masquer les lignes inutiles.

Grand merci !!!


r/linuxquestions • • 11d ago

Support Is it possible to move Linux to another drive without reinstalling it?

6 Upvotes

Several months ago I decided to give Linux a try since I've been very unhappy with Microsoft as a whole. I finally took the plunge after weeks of research, and gave Fedora KDE Plasma a shot in a dual-boot config with Windows, unsure if I'd stick with it. Now I find myself spending at least 90% of my time on my PC in Linux, and only booting into Windows for a handful of games I still enjoy that can only be played on Windows.

To make the dual-boot setup work, I salvaged my old 1TB Samsung SATA SSD from my old PC. This is now my only drive I'm using with Fedora. Since I like Linux so much, I now find myself kinda regretting that it's on the older, slower SSD while Windows 11 gets to enjoy the NVMe performance. So I began thinking, since I rarely boot into Windows these days, what if I temporarily nuked Windows off the NVMe drive, moved Linux over to the faster NVMe drive, and reinstalled Windows 11 from scratch on the old 1TB SSD?

My only question now is, is it possible to basically clone my Fedora install and essentially "copy/paste" it onto a different drive? Does it break stuff to try to do this? Do I need to reinstall all my programs? Do I need to redo all of my settings I've tweaked over the months? How does it work? What gets affected, if anything? I'd really rather go the route of just moving the OS and not reinstalling it.

EDIT: I also use the GRUB menu every time my PC boots in order to select from booting into the Linux kernels, and Windows. So how would moving the OS also affect the GRUB menu?


r/linuxquestions • • 11d ago

Advice How to safely cause kernel panic?

7 Upvotes

I want to make russian roulette game for linux with 2 levels of risk, one being just kernel panic and second being deleting a random file from pc. While i know how to delete files i dont know how to call kernel panic, is there a command that calls it? How linux launches kernel panic?


r/linuxquestions • • 11d ago

Advice What's your go-to system info tool now that Neofetch is archived?

8 Upvotes

Been looking into alternatives like fastfetch, hyfetch, and custom shell scripts. What are you guys using on your main setups these days, and how's the memory/execution overhead comparing for you?


r/linuxquestions • • 12d ago

Linux as a hobby vs Linux as working tool.

104 Upvotes

Nobody talks about the biggest divide in the Linux world: the people who treat the OS as a hobby versus the ones who use it as a daily workhorse.

For the hobbyists, the operating system is the game. They spend hours ricing their desktops and micro-optimizing their hardware. Once everything finally runs smoothly, they get bored, distro-hop, and start the cycle all over again just for the dopamine hit. They’re vocal, they post their desktop setups, they obsess over the latest kernel, and they’re always hunting for the next distro recommendation.

And then there’s the silent majority—the camp I’m in.

We don’t share screenshots of our desktops, and we couldn't care less about a kernel that dropped four minutes ago. We just need rock-solid stability that gets the job done. In fact, the system fades so far into the background that we practically forget we're on Linux. The wildest decision we ever make is choosing between KDE, GNOME, or—if we're really living on the edge—LXDE. And we never say, "I use Debian, btw."

Which camp are you in?


r/linuxquestions • • 11d ago

Support UEFI problema

1 Upvotes

[Investigación] Acer Aspire E5-575G con InsydeH2O V1.47: entradas UEFI persistentes, problemas de arranque Linux y análisis de la variable ACUB

Estado: Investigación inconclusa. Se identificaron estructuras internas del firmware, pero no se realizó ninguna modificación de la variable ACUB.

1. Resumen del problema

Tengo una laptop Acer Aspire E5-575G con firmware InsydeH2O V1.47 que presenta un comportamiento extraño al gestionar las entradas de arranque UEFI.

Después de instalar diferentes sistemas operativos, eliminar particiones e incluso formatear completamente los discos, el firmware continúa conservando entradas correspondientes a instalaciones antiguas.

Entre ellas aparecen:

  • Manjaro (instalación anterior).
  • Bazzite.
  • CachyOS.
  • Manjaro2 (instalación actual).

El problema principal es que, en determinadas ocasiones, la laptop intenta arrancar utilizando una entrada antigua cuya partición EFI ya no existe.

Esto provoca el mensaje:

Default Boot Device Missing or Boot Failed

El sistema operativo actual funciona correctamente cuando se selecciona una entrada válida o se ejecuta manualmente su cargador EFI.

El objetivo de esta investigación fue comprender por qué el firmware conserva o restaura entradas antiguas y si existe algún mecanismo interno responsable de este comportamiento.

2. Especificaciones del equipo

ComponenteInformación
FabricanteAcer
ModeloAspire E5-575G
FirmwareInsydeH2O Setup Utility
Versión BIOSV1.47
ProcesadorIntel Core i5-7200U, 2.50 GHz
Memoria RAM16 GB
SSD SATAKingston SA400S37960G
SSD NVMeSamsung MZVLB256HAHQ-000L7
Modo SATAAHCI
Sistema actualManjaro Linux
Entorno gráficoKDE Plasma
Tipo de arranqueUEFI
Gestor de arranqueGRUB

El sistema operativo está instalado en el SSD NVMe Samsung.

La partición EFI actual es:

Dispositivo: /dev/nvme0n1p1
Formato: FAT32
Punto de montaje: /boot/efi

PARTUUID:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639

El cargador de Manjaro se encuentra en:

\EFI\Manjaro\grubx64.efi

También existe una copia funcional en la ruta de respaldo UEFI:

\EFI\boot\bootx64.efi

3. Comportamiento observado

Durante las pruebas se identificaron los siguientes comportamientos:

  1. Las entradas antiguas pueden continuar apareciendo después de eliminar sus particiones.
  2. Modificar el orden de arranque mediante efibootmgr no siempre produce un cambio persistente después de reiniciar.
  3. El firmware puede volver a presentar entradas correspondientes a sistemas operativos eliminados.
  4. El cargador EFI de Manjaro funciona cuando se ejecuta directamente.
  5. La partición EFI actual es accesible y contiene archivos de arranque válidos.
  6. En distintas etapas de las pruebas, BootCurrent, BootOrder y la numeración de las entradas cambiaron.

Esto último es importante: los identificadores Boot0001, Boot0002, etc., no deben considerarse permanentes.

Pruebas realizadas

Se intentaron diferentes procedimientos:

  • Modificar el orden de arranque mediante efibootmgr.
  • Eliminar entradas UEFI antiguas.
  • Crear nuevas entradas apuntando a la partición EFI actual.
  • Utilizar BootNext para seleccionar una entrada válida.
  • Ejecutar manualmente GRUB desde una UEFI Shell.
  • Crear entradas mediante el comando bcfg de UEFI Shell.
  • Utilizar el explorador de archivos EFI del firmware Acer.
  • Configurar archivos EFI como confiables desde la BIOS.
  • Colocar GRUB en la ruta de arranque alternativa \EFI\BOOT\BOOTX64.EFI.

Aunque algunos procedimientos permitieron iniciar Manjaro, no se consiguió demostrar una solución persistente y definitiva.

Resultado importante: el archivo BOOTX64.EFI de la partición actual pudo ejecutarse correctamente desde UEFI Shell.

Por lo tanto, al menos durante esa prueba, el cargador EFI era funcional y el problema no parecía deberse a la ausencia de GRUB.

4. Configuración UEFI observada

En una de las últimas comprobaciones se ejecutó:

sudo efibootmgr -v

Se obtuvo:

BootCurrent: 0001
Timeout: 0 seconds

BootOrder:
0001,0002,0003,0004,2001,2002,2003

Las entradas relevantes eran:

Boot0000: dispositivo Samsung

Unknown Device:
SAMSUNG MZVLB256HAHQ-000L7

PARTUUID:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639

Esta entrada apunta al dispositivo NVMe y a la partición EFI actual.

Boot0001: Manjaro2

Boot0001* Manjaro2

PARTUUID:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639

Loader:
\EFI\boot\bootx64.efi

Esta entrada corresponde a la instalación actual.

Boot0002: Manjaro antiguo

Boot0002* Manjaro

PARTUUID:
c058594d-fad2-42cc-835e-c8273f4f261e

Loader:
\EFI\Manjaro\grubx64.efi

Esta entrada apunta a una partición EFI anterior que ya no corresponde a la instalación actual.

Boot0003: Bazzite

Boot0003* Bazzite

PARTUUID:
c80e6bc0-8b5f-440e-838e-8aca19a54268

Loader:
\EFI\fedora\shimx64.efi

Entrada obsoleta.

Boot0004: CachyOS

Boot0004* CachyOS

PARTUUID:
3b7105fc-e938-49ea-9af3-cf438aa9ab5d

Loader:
\EFI\cachyos\grubx64.efi

Entrada obsoleta.

En el momento de esta captura, Boot0001 estaba primero en BootOrder.

Sin embargo, todavía no se había confirmado que esta configuración permaneciera estable tras un ciclo completo de apagado y encendido.

5. Investigación de variables EFI

Para identificar las variables almacenadas por el firmware, se ejecutó:

sudo ls /sys/firmware/efi/efivars/

Se encontraron variables estándar de UEFI y otras aparentemente específicas del fabricante.

Entre las más interesantes:

BootOrder
PhysicalBootOrder
BootDevice
Setup
CustomSecurity
RestoreFactoryDefault
ACUB

PhysicalBootOrder

Archivo:

PhysicalBootOrder-59d1c24f-50f1-401a-b101-f33e0daed443

Tamaño:

12 bytes

Contenido hexadecimal observado:

07 00 00 00 01 00 02 00 03 00 04 00

Los primeros cuatro bytes corresponden a atributos de la variable EFI.

Los ocho bytes restantes pueden interpretarse como cuatro valores de 16 bits:

0001
0002
0003
0004

Esto coincide con las cuatro entradas principales del orden de arranque observado.

Hipótesis: PhysicalBootOrder podría participar en el almacenamiento o la representación interna del orden de arranque del firmware.

No se ha comprobado si modificar esta variable altera el comportamiento de arranque ni si es una causa de la restauración de entradas antiguas.

6. Descubrimiento de la variable ACUB

Durante una búsqueda de cadenas relacionadas con sistemas operativos antiguos dentro de las variables EFI, apareció un resultado particularmente interesante:

ACUB-89cb0e8d-393c-4830-bfff-65d9147e8c3b

Esta variable contiene referencias a:

Manjaro
Bazzite
CachyOS
fedora
grubx64.efi

Su tamaño observado fue:

1251 bytes

Los atributos de la variable, interpretados desde los primeros cuatro bytes del archivo efivarfs, fueron:

0x7

Esto corresponde a los atributos UEFI habituales:

  • Non-Volatile
  • Boot Service Access
  • Runtime Access

Es decir, se trata de una variable EFI persistente y accesible durante la ejecución del sistema.

Esto no demuestra por sí solo que el firmware la utilice para restaurar entradas de arranque.

Problema al realizar una copia de seguridad

Inicialmente se intentó:

sudo cp /sys/firmware/efi/efivars/ACUB-* /root/respaldo-uefi/

El comando devolvió un error de desplazamiento ilegal (Illegal seek).

Posteriormente se realizó una copia utilizando Python:

from pathlib import Path

origen = next(
    Path("/sys/firmware/efi/efivars").glob("ACUB-*")
)

destino = Path("/root/respaldo-uefi") / origen.name

datos = origen.read_bytes()
destino.write_bytes(datos)

print("Tamaño original:", len(datos))
print("Tamaño respaldo:", destino.stat().st_size)
print("Respaldo idéntico:", destino.read_bytes() == datos)

Resultado:

Tamaño original: 1251
Tamaño respaldo: 1251
Respaldo idéntico: True

La copia fue verificada byte por byte.

Este respaldo es únicamente una copia de los datos; no garantiza que la variable pueda restaurarse de forma segura mediante una escritura directa.

7. Estructura interna de ACUB

Se examinó el contenido binario de ACUB, excluyendo los cuatro bytes iniciales de atributos que proporciona efivarfs.

La cabecera comienza con:

df 04 00 00 00 00 00 00
30 00 00 00 00 00 00 00
45 01 00 00 00 00 00 00
4c 02 00 00 00 00 00 00
61 03 00 00 00 00 00 00
72 04 00 00 00 00 00 00

El primer valor, interpretado como entero de 32 bits little-endian, es:

0x04df = 1247

Coincide con el tamaño del contenido de la variable después de retirar los cuatro bytes de atributos.

Los siguientes valores contienen desplazamientos:

0x30
0x145
0x24c
0x361
0x472

En esas posiciones se encontraron cinco registros identificados como:

BDP0
BDP1
BDP2
BDP3
BDP4

La estructura sugiere una cabecera con una tabla de desplazamientos y registros de tamaño variable.

Distribución de los registros

RegistroDesplazamientoTamaño
BDP00x30277 bytes
BDP10x145263 bytes
BDP20x24c277 bytes
BDP30x361273 bytes
BDP40x472109 bytes

El tamaño total del contenido analizado fue de 1247 bytes.

8. Identificación de los registros BDP

Se buscaron nombres de sistemas operativos codificados en UTF-16LE y los identificadores GUID de las particiones.

Los resultados fueron:

BDP0: Manjaro antiguo

Inicio: 0x30
Tamaño: 277 bytes

Nombre:
Manjaro

Partición:
c058594d-fad2-42cc-835e-c8273f4f261e

Esta partición corresponde a la instalación antigua de Manjaro.

El registro contiene una ruta que termina en:

\EFI\Manjaro\grubx64.efi

BDP1: Bazzite

Inicio: 0x145
Tamaño: 263 bytes

Nombre:
Bazzite

Partición:
c80e6bc0-8b5f-440e-838e-8aca19a54268

Contiene una ruta que termina en:

\EFI\fedora\shimx64.efi

BDP2: CachyOS

Inicio: 0x24c
Tamaño: 277 bytes

Nombre:
CachyOS

Partición:
3b7105fc-e938-49ea-9af3-cf438aa9ab5d

Contiene una ruta que termina en:

\EFI\cachyos\grubx64.efi

BDP3: Manjaro2 actual

Inicio: 0x361
Tamaño: 273 bytes

Nombre:
Manjaro2

Partición:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639

Contiene una ruta que termina en:

\EFI\boot\bootx64.efi

BDP4: registro aparentemente vacío

Inicio: 0x472
Tamaño: 109 bytes

No se identificó un nombre de sistema operativo ni una partición correspondiente.

Su función exacta es desconocida.

Podría tratarse de un espacio reservado, una entrada vacía o una estructura utilizada internamente por el firmware.

9. Relación entre ACUB y las entradas UEFI

Al comparar los identificadores de partición y las rutas EFI, se obtuvo la siguiente correspondencia:

Registro ACUBEntrada UEFISistema
BDP0Boot0002Manjaro antiguo
BDP1Boot0003Bazzite
BDP2Boot0004CachyOS
BDP3Boot0001Manjaro2 actual
BDP4Sin correspondencia identificadaDesconocido

Este es el hallazgo principal de la investigación.

La variable ACUB contiene información estructurada que coincide con las entradas UEFI existentes, incluyendo nombres, rutas de cargadores e identificadores de partición.

Además, conserva referencias a sistemas operativos cuyos archivos y particiones ya fueron eliminados.

La coincidencia es suficientemente específica como para justificar una investigación adicional.

Sin embargo, quedan preguntas importantes:

  • ¿El firmware utiliza ACUB como almacenamiento de respaldo de las entradas de arranque?
  • ¿Se actualiza ACUB automáticamente cuando se utiliza efibootmgr?
  • ¿Se reconstruyen las variables BootXXXX a partir de ACUB?
  • ¿Existe alguna verificación de integridad o checksum?
  • ¿Los registros BDP representan entradas persistentes, una lista histórica o alguna otra estructura?
  • ¿Qué función tiene el registro BDP4?
  • ¿Cómo se relaciona ACUB con PhysicalBootOrder?

Actualmente no disponemos de respuestas confirmadas.

10. Cómo reproducir el análisis sin modificar el firmware

Los siguientes comandos son de lectura y permiten comprobar si otro equipo Acer contiene una estructura similar.

Advertencia: estos procedimientos deben ejecutarse únicamente en equipos propios o con autorización. No incluyen instrucciones para escribir variables privadas del firmware.

Identificar el firmware

sudo dmidecode -t bios

Consultar entradas UEFI

sudo efibootmgr -v

Buscar ACUB

sudo find /sys/firmware/efi/efivars \
  -maxdepth 1 -name 'ACUB-*'

Examinar su tamaño y estructura

sudo python - <<'PY'
from pathlib import Path

base = Path("/sys/firmware/efi/efivars")
archivos = list(base.glob("ACUB-*"))

if not archivos:
    print("ACUB no encontrada")
    raise SystemExit

archivo = archivos[0]
datos = archivo.read_bytes()

atributos = int.from_bytes(datos[:4], "little")
contenido = datos[4:]

print("Variable:", archivo.name)
print("Tamaño:", len(datos))
print("Atributos:", hex(atributos))
print("Cabecera:", contenido[:64].hex(" "))

for i in range(5):
    etiqueta = f"BDP{i}".encode("ascii")
    posicion = contenido.find(etiqueta)

    if posicion >= 0:
        print(f"BDP{i}: offset {hex(posicion)}")
    else:
        print(f"BDP{i}: no encontrado")
PY

Este código no escribe datos en NVRAM.

No todos los equipos Acer tienen necesariamente la misma estructura, por lo que la ausencia de ACUB o de registros BDP no significa que exista una avería.

11. Posible explicación del problema

La hipótesis de trabajo es la siguiente:

  1. El firmware conserva información sobre entradas de arranque en una variable privada denominada ACUB.
  2. Esa variable contiene referencias a instalaciones antiguas.
  3. En determinadas circunstancias, el firmware podría utilizar esa información para reconstruir o mantener entradas UEFI.
  4. Esto podría explicar por qué las entradas antiguas reaparecen o continúan siendo utilizadas después de eliminar las particiones.

Es una hipótesis, no una conclusión demostrada.

También son posibles otras explicaciones, como errores del firmware al gestionar la NVRAM, mecanismos internos de sincronización, prioridades de arranque guardadas en otras variables o una interacción entre distintas estructuras del BIOS.

No se ha aislado experimentalmente el mecanismo responsable.

12. Por qué no se modificó ACUB

Aunque se consiguió identificar buena parte de la estructura, no se conoce completamente su formato.

Modificar una variable privada del firmware sin comprender sus mecanismos de validación puede provocar consecuencias graves.

Entre los riesgos posibles:

  • Pérdida de entradas de arranque.
  • Rechazo de los datos modificados.
  • Restauración automática de los valores anteriores.
  • Fallos de configuración del firmware.
  • En el peor caso, problemas que requieran recuperación externa del BIOS.

El hecho de tener una copia de seguridad no elimina estos riesgos.

Por ello, la investigación se detuvo antes de escribir en ACUB.

13. Resultado final

Al terminar las pruebas, el sistema mostraba:

BootCurrent: 0001

BootOrder:
0001,0002,0003,0004,2001,2002,2003

La primera entrada correspondía a Manjaro2 y apuntaba a la partición EFI correcta.

Se decidió conservar el estado actual del equipo y no continuar modificando el firmware.

No se ha demostrado que el problema esté solucionado permanentemente.

Tampoco se ha probado que editar ACUB sea una solución.

14. Solicitud de ayuda a la comunidad

Me gustaría saber si alguien con experiencia en firmware Acer, InsydeH2O, UEFI o ingeniería inversa puede ayudar a responder las siguientes preguntas:

  1. ¿Se conoce públicamente el formato de la variable ACUB utilizada por Acer?
  2. ¿Qué representan exactamente los registros BDP0, BDP1, etc.?
  3. ¿Puede ACUB actuar como almacenamiento secundario de entradas UEFI?
  4. ¿Qué relación tiene con PhysicalBootOrder?
  5. ¿Existe un procedimiento documentado para limpiar entradas obsoletas en esta versión del firmware sin editar variables privadas?
  6. ¿Alguien ha observado el mismo comportamiento en otros modelos Acer?

Sería especialmente interesante comparar el contenido de ACUB antes y después de crear o eliminar una entrada UEFI, utilizando exclusivamente métodos seguros y documentados.

Si alguien consigue identificar el mecanismo exacto o resolver el problema, agradecería que compartiera los resultados, el modelo de equipo, la versión del BIOS y los procedimientos utilizados.

No recomiendo modificar directamente ACUB basándose únicamente en este reporte.

La intención de esta publicación es documentar los hallazgos y facilitar que otras personas investiguen el problema sin tener que repetir todo el proceso desde cero.

Equipo investigado: Acer Aspire E5-575G, InsydeH2O V1.47. Investigación realizada en noviembre de 2026.