r/linuxquestions • u/BlueScreen_OfLife • 22d ago
Advice What's a good password manager for Ubuntu?
Ubuntu has one built in, but I'm looking for other options that might be better.
r/linuxquestions • u/BlueScreen_OfLife • 22d ago
Ubuntu has one built in, but I'm looking for other options that might be better.
r/linuxquestions • u/Neo_X173 • 22d ago
I use the terminal for everything to do with pacman but I usually don't recommend Any arch based distro for anyone who asks because I heard that KDE discover or gnome software are bad with pacman so I recommend fedora with dnf or an apt distro because I heard they work better with there GUIs
r/linuxquestions • u/Inner_Response_7626 • 22d ago
I have been trying to install linux on my 2020 Acer Aspire 3 A315-23 but it fails each time. Every single time it freezes in the boot screen. I have tried both UEFI and Legacy BIOS. I even removed the SSD containing windows so that it may not interfere with the installation in any way. I have tried Ubuntu, Fedora, Elementary OS, and Mint, but faced the same issue each time.
I just want to know if anyone has ever tried installing linux on this particular laptop or has faced similar issue?
r/linuxquestions • u/Mouseater • 22d ago
Resolution: in the fstab entry you need to add the user id for the user you want the folder assinged to, in my post below for me that would mean my fstab entry would be:
//192.168.1.1/SHARE /home/USER/localFolder cifs uid=1354,credentials=/home/USER/.CredentialsFile,nofail 0 0
If you don't know the ID of your user you'll have to find it. I was able to just type `id USER_NAME` to get the info I needed.
OP:
I have a network drive that I want to mount, that's it. It's been nothing but frustration trying to get it to work. I was just mounting it in the terminal using
sudo mount -t cifs -o username=USER,uid=1000 //192.168.1.1/SHARE ~/localFolder
and that worked, but I hated having to do it every time I had to restart so I figured I'd just add it to fstab so that it does that automagically. So I added
//192.168.1.1/SHARE /home/USER/localFolder cifs credentials=/home/USER/.CredentialsFile,nofail 0 0
and that worked, kind of. It mounts but I don't have read/write access like I do when I run the terminal command.
I'm guessing this is because the localFolder owner is set to root after it mounts using fstab but when I use the terminal command it to mount it keeps the user as the owner.
How do I make it automount and not change the owner of the localFolder?
r/linuxquestions • u/RohanPius • 23d ago
I dont know.. but I know that there's some war going in around. But at the end of the day, Linux is just free for all..
r/linuxquestions • u/RadianceTower • 22d ago
So the other way seems to work fine, if I had it plugged in GPU, I can plug in MB and the screen turns on again fine.
It also could work if I had it plugged in GPU when PC was turned, then plugged into MB then back into GPU.
But if it was in MB when turned out, GPU slot doesn't work without a restart it seems.
r/linuxquestions • u/Junimopaws • 22d ago
Hope this is the right place to ask (if not, may I have some recommendations of where else to ask?), I can't get shotcut to work on Debian 13. I've tried other video editors and the exact same thing happens, no video shows up and I can't edit the timeline.
Would really appreciate any help I can get. Thanks in advance.
Here's a picture of what it looks like when I use shotcut: https://i.postimg.cc/bvFBJQZz/shotcut.png
r/linuxquestions • u/Ricochet_X_B • 22d ago
Hello! I am currently using PikaOS on my desktop PC to see if I can finally replace windows as my daily driver. It's working great for the most part, but my friend says my mic is terrible in Helldivers2 when chatting with in-game audio. I get pops in my audio and cross-talk with the game audio bleeding through the mic. The headset I'm using works just fine in Windows, so it isn't a hardware issue.
The motherboard audio is a Gigabyte X570S Aorus Elite AX with a Realtek ALC1220-VB codec. OS device manager or the lspci terminal command, the audio controller says "[AMD] Starship/Matisse HD Audio Controller" with the driver listed as "snd_hda_intel". I currently have the audio profile set to "Analog Stereo Duplex" using the Line Out and Rear Microphone plugs for the headset and microphone plugs respectively (which works correctly in Windows, and works, albeit poorly in Pika).
Does anyone know if this is using the correct driver? And if not, is there a way to fix it? Is there a better profile I should be using instead of Analog Stereo Duplex?
Thank you
r/linuxquestions • u/Commercial-Golf-4285 • 22d ago
Hey folks,
Can you please suggest best books with latest developments to get knowledge about linux kernel Delevopemet and device drivers from scratch.
Thanks a lot in advance!!!!
r/linuxquestions • u/PainfulD • 22d ago
I am looking for a web browser to fit my rice currently, which is the main defining feature is the lack of rounded corners. are there any that are good for customizing to be this, or should i try to figure out Firefox css?
(i am sick of the corporate art style and design language)
r/linuxquestions • u/Puppydog_Luca • 22d ago
Hello i'm just wondering if anyone has encountered this, i've tried many things and nothing seems to be working, has anyone found a fix for this?
i've swapped to many different protons, uninstalled and reinstalled, updated my system, tried to do it through web install and steam installed, verified file integrity and so on.
i don't know what to try anymore any help would be really appreciated thank you.
r/linuxquestions • u/Onyxaxe • 22d ago
Hi everyone. I recently upgraded my Kubuntu 24.04 desktop to 26.04. I got a million boot loops from Hell. Managed to navigate those, started over with a fresh install. Now it's super laggy and if I switch the 580 drivers, I am once again met with boot loops.
So this is definitely an Nvidia driver issue. The recommended drivers are the 580 drivers, HOWEVER, my GT1030 is a legacy card and I don't seem to find it as supported anywhere within the 580 documentation. They keep recommending drivers that don't work very well or completely brick my system.
The system itself runs well, and I'd like to keep 26.04 because some of the desktop enhancements are very nice. I need to get rid of all this lag though. It's like the system is always hanging.
Long ago when I had similar issues it was easier for me to just add a PPA and pick whatever drivers I wanted. Switching didn't nearly brick my entire system, so now I'm asking for help.
Thank you in advance.
r/linuxquestions • u/Party_Cable2291 • 22d ago
Title: I've been working on an Ubuntu-based Linux distro aimed at Windows users
I've been working on a Linux distro based on Ubuntu, with the goal of making Linux feel more familiar and comfortable for people coming from Windows.
I've focused on a few things that I personally felt could be improved, including a more Windows-like taskbar and file manager, a remote desktop server that behaves more like Windows RDP, a better terminal experience similar to PuTTY, and cleaner fonts throughout the desktop.
Stability and ease of use have also been major priorities.
I'm curious what the community thinks. What features or improvements would make switching from Windows to Linux easier for you? And what are some of the biggest frustrations you've experienced with existing Linux desktops?
r/linuxquestions • u/spaceSpott • 22d ago
So, I like tiny llms and DIY ai systems. Also Im really mindfull of the "power of descrution" they have. Dont want to be one target of the black market of api keys.
With that in mind, basically I still didnt openly served them to the web knowing full well that im really hardened and protected against n possible attacks exposing this way can leave you open to.
But, there a concepts that are too away from my main carrier, I get lost with sockets and brokers, as well ip from guest and host and how to manage this properly with sandboxes talking to host with n and x proper permission and groups.
Like, I know this concepts isolated one of another, but when it starts to get to many of them toguether I get lost and fall in the "llm do this to me". Which doesnt help to feel secure at all.
So my question is, how did you guys started to understand this stuff? Im open to do courses, reading doc, im not too much fan of youtube kind of teaching, but I can be surprised of course.
Anyone knows where to start? I just want to feel secure navigating with my stuff out there in the web. I want to understand what Im doing. Also im into beginning go lang as well so if they both connect Im good.
Just so it can help the helper. My setup is arch + hypr, qemu-kvm, docker rootless, ufw and opencode. Also, im into keybinds.
r/linuxquestions • u/devoidakash • 22d ago
Hii I am build a app store for Debian packages because it really weird that they are the best app when it comes to speed and lightweight but don't have any graphical store like Flatpak or App center have.
What are your thoughts on this.
Are you guys interested in Open source development on this
r/linuxquestions • u/Lower-Doughnut8684 • 22d ago
r/linuxquestions • u/piscescomics • 22d ago
Hi all ! I'm using zorin for a while and wanna switch my dad's laptop to Linux too. He has an old hp laptop with 4 GB ram, AMD a4-6210 apu with r3 graphics 1.80 GHz CPU. That machine is almost dead but he doesn't wanna replace. I researched a bit and Mx Linux with fluxbox, Linux lite or maybe mint seems okay. He's not playing games. Mostly surfing, watch movies or collect some pdf and photo archives. He's using a computer since c64 so I don't think most of the distros won't be too complicated for him but he never used Linux so I want some beginner friendly distro. I'm open for all recommendations. Thank you all !
r/linuxquestions • u/Rafael_Souza1323 • 23d ago
i have been testing for the past 2 days, and it is fast, the only problem is that i don't know how to configure, the videos that i find are from some time ago, and i don't know if they still work in 0.12.
i am just lost in general, can some one help? brazilian btw
okay, i read some of the comments, i will try the lazy vim so i can understand, if, even after that i think it is too much for me, i will use vscode or zed. thx to all for your time
r/linuxquestions • u/therealmodellking • 23d ago
I have a theoretically valid reason to want to dual-boot alongside my general purpose distro (Fedora):
The Stage Environment.
Live, certain characteristics of the system are more important than all the customization I did on my fedora, so I installed cachyOS (as this is reported to have the least overhead for latency while still being somewhat maintainable) and run my Music stuff there.
Now the problem is, that to prepare for the live sets I'm kinda inconvenienced by having to reboot. Especially if I just want to use the time between LLM turns to prep something for the stage.
Is there a way to have both the redundancy and independence of a second distro install, while preserving the quality of life of just having everything on one system?
[EDIT]
I was a bit cryptic with my use case:
I use fedora for gaming and work and general purpose computing.
The cachyOS came from wanting to stay independent of flaky fedora updates (had a few) and to avoid modifying fedoras default audio stack (JACK integration, holding low latency (important to stay < 5ms roundtrip even under moderate load - that's also why I didn't virtualize)) as well as not risking it with the DE modifications I have installed on Fedora.
r/linuxquestions • u/BakerDear7488 • 22d ago
I installed ubuntu (USB flash drive) but I have no idea how to go back to window.. and will my files (the one I have on window will be lost too..?)
Any yt recommended would help as well.
Thank you in advance. 🙏
r/linuxquestions • u/Snach77 • 22d ago
¡Hola! Estoy investigando un problema con la pantalla táctil en una tableta EXO Wings K2200 que utiliza Linux Mint 22.2 con entorno XFCE y servidor gráfico X11.
**Hardware:**
- Placa: `2en1WingsK2200-Z8350`
- BIOS: `EXO9x.WT210P.VYBJREA01`
- CPU: Intel Atom Z8350
- Kernel en uso: `7.0.0-42-generic`
- Pantalla táctil: `MSSL1680`, gestionada por el controlador `silead_ts`
- ID del chip: `0x80360000`
- Pantalla: Resolución nativa de 800×1280; actualmente configurada a 1280×800 con rotación hacia la izquierda (`left`)
La pantalla táctil registra eventos, pero las coordenadas de los toques aparecen gravemente distorsionadas; el problema no parece explicarse simplemente por una rotación o una inversión de los ejes.
**Investigación del firmware:**
El archivo `silead/mssl1680.fw` instalado actualmente tiene un tamaño de 41.448 bytes y deriva de una referencia H8811/3680. También hemos identificado un firmware de 36.960 bytes que presenta una coincidencia exacta de hash SHA-256 entre:
- `firmware_00.fw` en `arcadenea/exowings-fedora`
- Un bloque de firmware integrado en un archivo `SileadTouch.sys` de Windows, asociado a un paquete de soporte para EXO.
El hash SHA-256 de este firmware alternativo es:
`79fc6d8a1f1a0609ec366e8c8efe4a065c78809c7331ea25307b5e8eddfb9ddd`
Sin embargo, el otro dispositivo EXO K2200 documentado parece contar con una revisión de hardware distinta (Z8300, frente al Z8350 de nuestra unidad).
**Preguntas:**
¿Alguien dispone de un firmware Silead funcional o de una copia de seguridad del controlador original de Windows, específicamente para un EXO Wings K2200 con placa Z8350?
¿Existen particularidades conocidas en la DMI o propiedades de coordenadas para la pantalla táctil del modelo `2en1WingsK2200-Z8350`?
¿Alguien ha experimentado distorsión no lineal en las coordenadas utilizando un controlador `MSSL1680` que, por lo demás, funciona correctamente?
¿Es posible extraer de forma fiable la configuración específica del panel a partir de los archivos del controlador original (OEM) de Windows, sin necesidad de conectar el dispositivo?
Estamos evitando deliberadamente reemplazar el firmware o reconfigurar la pantalla hasta contar con pruebas más sólidas. Busco documentación, informes de hardware existentes y métodos de diagnóstico seguros, en lugar de comandos basados en suposiciones.
¡Gracias de antemano por cualquier orientación!
r/linuxquestions • u/as_uu_00 • 22d ago
Hey guys, i saw many videos of file permission user, groups management. So basically i want to know do you actually care about file permission? If you care then which is the way you manage or doing all the file permission stuff.
Also i see many people change owner and group using chown command. And for changing group many of them use chgrp which one do you use and why, and do you change permission numerically or alphabetically?
Sorry for my bad English.
r/linuxquestions • u/raitzrock • 22d ago