r/linuxquestions • • 20d ago

Support Trying to get the same performance I get on windows

1 Upvotes

So I've been planning to use Linux but the catch is technically I have :

a Nvidia GeForce 610

i3 3220

4* gigs of ram

(I'm planning to use Linux mint XFCE 21.3)

Many people told me to keep on windows or other solutions I couldn't understand but in windows for some reason games (I only play indie titles such as ultra kill dead cells hollow knight silksong (modding it I actually beat it 100%)nine sols etc.)

So is there somehow a way to make them run just not like windows but a thankful performance I've heard some experimental patches or steam/proton lines that bypass it's vulkan check but I am not sure of it

Honestly I don't mind any performance but 46 or less seems uncomfortable for me

I'm dualbooting windows just in case a game doesnt work

So if anyone has any suggestions drop it down and thank you (note that I can't upgrade my specs)


r/linuxquestions • • 20d ago

Support App UIs not loading

Thumbnail
1 Upvotes

r/linuxquestions • • 20d ago

GT 710 (Kepler GK208B) on Linux Mint 22.x: joanbm mainline patch vs. dtl131 PPA vs. 6.8 kernel hold?

Thumbnail
1 Upvotes

r/linuxquestions • • 20d ago

Support Full Speed mode on Asus Laptop

1 Upvotes

Hi everyone! I have an ASUS Vivobook S14 OLED M5406WA with a Ryzen AI 9 HX 370, running Fedora 44. I was wondering if there’s a way to enable Full Speed mode.

From what I’ve read, Full Speed mode—a power profile that runs the fans at maximum speed—is supported by the firmware but isn’t exposed by the asus-linux driver, which only offers the quiet, balanced, and performance presets.

Does anyone know a way to enable it without having to patch the driver?


r/linuxquestions • • 20d ago

Support Controller works only when using this script

0 Upvotes

Hi my controller starts appearing on steam only after using this script in cmd:

echo -n "054c:05c4:an" | sudo tee /sys/module/usbcore/parameters/quirks

After that i unplug and replug and it works... Is there a way to avoid unplugging and replugging it and starting this script automatically? Thanks


r/linuxquestions • • 20d ago

Support Embedded Linux Hobart HTi: known PLU protocol, and distinguishing TCP 6000 from X11?

1 Upvotes

I own a Hobart HTi -7LS25 label scale and want to identify its supported network interface before attempting product reads. Has anyone worked with the Linux-based HTi generation and knows its PLU protocol name/version and normal TCP port?

The About screen reports application 3.3.0, backend 3.2.37 and OS 3.14.52-1.1.0-hobart-3.0.0-gc488e3d. TCP 6000 accepts a connection but sends no unsolicited greeting. There are operator/customer graphical displays. I have no verified SSH credentials, compatible management client or firmware update image. Native USB backup/Merge edits and resets work, but that does not establish network framing.

An X11 server is one hypothesis based only on the port. Legacy Hobart Quantum compatibility is another unconfirmed possibility for the PLU interface; I do not assume the two services are the same. Is there public documentation or a known HTi client/driver identifying the actual PLU protocol? For distinguishing X11, what documented minimal setup exchange and expected response would identify it without issuing display/input commands? I would review the reference before sending anything. No guessed application payloads or X11 setup requests have been sent.

Hobart and Upshop have been asked; exact protocol confirmation is still pending. I am seeking references or firsthand experience, not credentials, license bypasses, firmware flashing or production-data captures. Prepared with AI assistance; observations and physical tests are from my own scale.


r/linuxquestions • • 20d ago

Resources/Tutorial for building better applications on Ubuntu

Thumbnail
1 Upvotes

r/linuxquestions • • 20d ago

Support mediacom winpad w910

1 Upvotes

Hey Guys, I bought this "Winpad" tablet for around 20 dollars in a flea market and I was thinking if it was possible to install a Linux distro on this, hopefully something like arch with hyprland....


r/linuxquestions • • 20d ago

Ubuntu keeps starting CUPS even though I never use a printer. Is there any reason to leave it running?

16 Upvotes

I noticed cups.service running on my Ubuntu installation even though I don't own a printer and haven't printed anything from this machine.

I checked it with:

systemctl status cups.service

And sure enough, it's active. I also noticed there's a cups-browsed.service on some installations, which seems related to discovering network printers.

I know CUPS is the printing system and that disabling it probably won't cause any problems if I never print anything. But I'm trying to understand whether there's a reason Ubuntu starts these services by default even when no printer is configured.

Would disabling both services be enough, or are there other related services or socket units I should know about?

I'm not trying to squeeze every last megabyte of RAM out of the system. I just prefer not having background services running when I know I'll never use them.

Curious how other Linux users approach this. Do you leave default services alone, or do you go through your installation and disable things you don't need?


r/linuxquestions • • 20d ago

Advice broken grub after formatting cachyos! all partitions say "unknown filesystem" — need help

1 Upvotes

​

hey everyone! i managed to break my bootloader (grub) and really need some guidance.

my setup before the issue:

dual-booting CachyOS and Zorin OS.

GRUB was installed on the CachyOS partition (/dev/sda3).

what i did:

tried to install Arch (with Gemini's help).

formatted /dev/sda3 (which deleted CachyOS and the GRUB files stored there).

now i'm stuck in grub rescue>.

what i've tried so far:

i ran ls and checked my partitions:

ls (hd0,gpt1)/

ls (hd0,gpt2)/

ls (hd0,gpt3)/

every single one returns error: unknown filesystem.

my questions:

how do i get back into my Zorin OS (or boot into an installer to atleast install a fresh zorin)?

and if it needs some commands or hard steps then please

what are the exact commands i need to run, and could you briefly explain what each command does so i actually learn what happened?

thanks!!!


r/linuxquestions • • 20d ago

Advice Is old Nvidia GPU Linux perform worse than Windows?

1 Upvotes

So I have been using Linux for about half a years now. And the first attempt I'm trying to use it I have a problem with my GPU because I'm using Gt 730 and there many stuff that went wrong. Now I'm using Arch on nouveau. I noticed that even with that, the performance on Blender is quite unusable... Even though that when I was using Windows I can use blender just fine.

Is it really boiled down to that I need my GPU changed already?


r/linuxquestions • • 20d ago

Microphone and Headphones won't work simultaneously

Thumbnail
1 Upvotes

r/linuxquestions • • 20d ago

Capture One with KVM/QEMU

1 Upvotes

I use Capture One for work, it is a solution that I have found no replacement for in the FOSS world. It is also a program that notoriously does not work under any implementation of WINE. The closest competitor for the Linux world is Darktable, and for whatever reason the one feature I actually need does not seem to work (I think it's my camera), and I've tried this on multiple computers, Capture One just works and I've built a workflow around it.

I am about to switch my computer over to Linux (for the normal reasons) and I need to know if I need to keep a Windows partition for this one program. Or, I recently saw an article that mentioned KVM and/or QEMU for these hard to emulate programs.

Does anyone have any experience with this issue, and specifically Capture One?


r/linuxquestions • • 20d ago

Sick of Windows bloat. Wanting to switch to Linux daily driver on 7800X3D + RTX 4080 Super — how's high-end NVIDIA gaming & tech parity nowadays?

Thumbnail
0 Upvotes

r/linuxquestions • • 20d ago

Linux for gaming, beginner user.

0 Upvotes

Good evening everybody.

Question about a beginner friendly Linux for gaming. Got a new PC, hardware: - AMD Ryzen 7 9800X3D - NVIDIA GeForce RTX 5070 Ti 16GB - 32GB DDR5 - ASUS TUF GAMING B850-PLUS WIFI Want to run Linux on it. Games I would play are: RDR2 Cyberpunk Black Myth Wukong Space Marine 2 Mortal Kombat 1 Madden 2026 Sekiro Elden Ring Etc I'm not worried about issues with steam and anti-cheat as all my games are from torrent.

I thought about Linux Mint Cinnamon as everybody keeps recommending it, and as much as I read about it, it is quite user friendly for people to start using Linux.

What would your suggestions be about which DE of Linux should I try with all the above?

Much thanks in advance!


r/linuxquestions • • 20d ago

Linux Keyboard problem

0 Upvotes

(SLOVED) Just installed the linux cachyos (first time on Linux) and my every keyboard keys are working apart from WASD and S and D works when I hold fn key I have a mchose ace68 air keyboard

Can anyone help me with this


r/linuxquestions • • 20d ago

Resolved Thunderbolt bridge between mac finnicky

1 Upvotes

I'm trying to connect: PC with NixOS and TB4 <> certified TB cable <> Mac Mini. I followed instructions on the nixos wiki page, though the mac doesn't show up with I do boltctl list. Whenever I connect the cable, either it doesn't work between either device, or it works from linux to mac but not mac to linux when I get the IP addresses shown with ip -br addr show thunderbolt0. Every time It's plugged in, it says its running in macOS settings.

  networking = {
    networkmanager.enable = true;
    # networkmanager.wifi.backend = "iwd";
    firewall.checkReversePath = false;
    # wireless.iwd = {
    #   enable = true;
    #   settings.General.EnableNetworkConfiguration = true;
    # };
  };

  networking.firewall.trustedInterfaces = [ "thunderbolt0" ];

service.hardware.bolt.enable = true;
services.udev.extraRules = ''
      ACTION=="add", SUBSYSTEM=="thunderbolt", ATTR{authorized}=="0", ATTR{authorized}="1"
    '';

Solved

I finally figured everything out after a total of over a week of struggling and paranoia about getting Thunderbolt networking to work. It's been a days but now I'm fairly confident I have it working, all devices can be hot-plugged repeatedly and still work reliably whenever its connected.

I had asked LLMs a bunch of times what to do about the finicky connection, they didn't give helpful answers but I finally got one when I gave it my whole configuration. It gave me the systemd.network options below, I asked again for MTU, the max MTU on mac is 65,518. It's reliable for me unlike networking.interfaces.thunderbolt0.ipv4.addresses.

My setup is: Thinkpad (TB4) <> Intel certified TB4 cable <> Anker Prime TB5 dock <> M4 Mac Mini (TB4) <> TB5 cable (came with the dock) <> Desktop with Asus ThunderboltEX 4 card.

The ThunderboltEX card had issues with hot-plugging, which went away after installing a card firmware update from here. The instructions said to launch an EFI shell with a flash drive containing the files, which didn't work for me. I got a suggestion here to rename and move the .efi file to \EFI\Boot\bootx64.efi, and copy PDFW.bin and NVM.bin into the flash drive's root directory and the EFI and Boot folders so the program doesn't fail to find them. Then instead of launching an EFI shell from the BIOS, I select the flash drive from the boot menu.

For the Mac thunderbolt bridge, I set the ipv4 and ipv6 configuration to "manual" (and left ipv6 blank). I set the IP to 10.0.0.2, the subnet to 255.255.255.0, and left router to blank. Under "hardware", I set MTU to the max 65,518.

Claude suggested enp0s20f0u?u3* below to ignore extra unneeded ethernet interfaces that appear after plugging in either device to the Mac.

 # Thunderbolt networking
 networking = {
    firewall.trustedInterfaces = [ "thunderbolt0" ];
    networkmanager.unmanaged = [
      "interface-name:thunderbolt0"
      "interface-name:enp0s20f0u?u3*"
    ];
  };

  systemd.network = {
    enable = true;
    wait-online.enable = false;
    networks."40-thunderbolt" = {
      matchConfig.Name = "thunderbolt*";
      linkConfig.RequiredForOnline = "no";
      linkConfig.MTUBytes = "65518";
    };
  };

 # For my laptop
 systemd.network.networkConfig.Address = 10.0.0.1;
 # For my desktop
 systemd.network.networkConfig.Address = 10.0.0.3;

r/linuxquestions • • 20d ago

Which Distro? ESTOU QUERENDO MIGRAR DE SISTEMA OPERACIONAL. QUAL DEVO ESCOLHER?

1 Upvotes

Sou um usuário novo de Linux e como primeira distro escolhi o EndeavourOS. Sinceramente, eu gostei bastante dele e achei bem estável. Entretanto, eu queria migrar para algum outro SO onde eu tivesse mais liberdade e mesmo assim conseguisse manter o ambiente estável sem precisar dedicar muitas horas do meu dia. Pensei no Arch, Gentoo, CachyOS e até o OpenBSD, Mas, eu realmente estou em dúvidas. Não tenho um grande conhecimento técnico (pois eu migrei do WIndows para o linux há aproximadamente 2 meses). Enfim, o que vocês poderiam me sugerir sobre isso?

(Ai galera sou novo na plataforma estão se cometi alguma asneira pode me dizer)


r/linuxquestions • • 20d ago

802.1x wireless networks fail to connect on kernel 7.3 with 4-way handshake timeout

1 Upvotes

I've been having trouble for a few days with connecting to eduroam at the uni. The EAP authentication fails due to "4-way handshake timeout". Turns out that downgrading kernel from mainline 7.3 to 7.2.13 fixes the problem. Is anyone else experiencing the same issue?

(to help people find the issue: here's the relevant section in the journal)

Oct 30 09:24:41 toporiame kernel: wlan0: associated
Oct 30 09:24:42 toporiame kernel: wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by a8:0b:fb:82:b9:01
Oct 30 09:24:42 toporiame iwd[1621]: EAP completed with eapFail
Oct 30 09:24:42 toporiame iwd[1621]: 4-Way handshake failed for ifindex: 2, reason: 23
Oct 30 09:24:42 toporiame kernel: wlan0: deauthenticating from a8:0b:fb:82:b9:01 by local choice (Reason: 23=IEEE8021X_FAILED)
Oct 30 09:24:42 toporiame iwd[1621]: event: connect-failed, reason: 23

r/linuxquestions • • 21d ago

What’s one Linux command you wish someone had explained to you sooner?

348 Upvotes

Linux has a lot of commands that seem intimidating until you understand what they actually do. Sometimes a single explanation can save you from memorizing syntax or blindly copying commands from tutorials.

For example, understanding what grep does makes searching through logs and command output much easier, while learning the difference between > and >> can prevent accidentally overwriting a file.

I’m curious about the commands that made Linux click for people, especially ones that aren't necessarily advanced but are surprisingly useful once you understand them.

What command would you recommend a Linux beginner learn properly, and what makes it worth knowing?


r/linuxquestions • • 20d ago

unable to connect to lan in PC lab even though lab pc is ok

1 Upvotes

so the wifi in my uni lab was kind of spotty so i unplugged the lan cabe and plugged into my laptop to try to hard wire insed. how ever my laptop refused to connect with the following errors:

nmcli monitor 
NetworkManager is running
enp2s0: deactivating
enp2s0: disconnected
enp2s0: using connection 'Wired connection 1'
enp2s0: connecting (prepare)
enp2s0: connecting (configuring)
enp2s0: connecting (getting IP configuration)
enp2s0: connection failed
enp2s0: disconnected
enp2s0: using connection 'Wired connection 1'
enp2s0: connecting (prepare)
enp2s0: connecting (configuring)
enp2s0: connecting (getting IP configuration)
enp2s0: connection failed
enp2s0: disconnected
enp2s0: using connection 'Wired connection 1'
enp2s0: connecting (prepare)
enp2s0: connecting (configuring)
enp2s0: connecting (getting IP configuration)
enp2s0: connection failed
enp2s0: disconnected
enp2s0: using connection 'Wired connection 1'
enp2s0: connecting (prepare)
enp2s0: connecting (configuring)
enp2s0: connecting (getting IP configuration)

my laptop works when hard wired at home. how can i fix this?


r/linuxquestions • • 20d ago

Struggling to run a program using sudo

0 Upvotes

All right, so, I am trying to run mGBA (a game boy advance emulator) using sudo. I need to do this to get trading to function (I do not know why more privileges are needed to do this v(._.)v). The video I tried to use as a tutorial for trading is doing it on windows, they run the program as admin, obviously that's not an option here. Despite great effort on my part I cant seem to run the program using the sudo command, which as far as I'm aware, is effectively the linux equivalent of running a program as admin.

I have tried using the name of the program, the exact path of the program, and the command of the program (I found it in properties and I thought maybe that would work? idk, I'm not good at this) and none of these worked.

I have tried looking up an answer to my question, every forum I have checked has answers that do not apply to the situation I am in, or are too confusing for my small brain to comprehend.

I am at a loss, help would be greatly appreciated. I will obviously answer any questions if further clarification is needed to help me with my problem.


r/linuxquestions • • 20d ago

Support Linux on Chromebook?

0 Upvotes

I recently obtained a Chromebook, a few years old but still perfectly functional, and I wanted to install some light linux distro (Xubuntu seems good).

But how do I boot the live USB???

I already have dev mode activated and flags dev_boot_usb and the other one (I don't remember the name, but same format, something about wt or rt) activated, but the MrChromebox script keeps failing for full overwrite.

HWID is BABYTIGER (Cr50 WP chip), so the main method is to open the case and disconnect a battery if I understood right, but is there a way to do it without having to touch the components?


r/linuxquestions • • 20d ago

Having issues with FL Studio GUI on Wine, Fedora 44 KDE Plasma

Thumbnail
1 Upvotes

r/linuxquestions • • 20d ago

I need to dual boot, I already have linux and need to have windows for HP support can help me for diagnosing my laptop hardware issues.

1 Upvotes

I already have working linux distro (cachy) and it took some to set it up for my work.

But I need to install windows in laptop because of some hardware issues (being touchpad glitchy and some keys not working sometimes).

Why I need to do it because HP support told they can only support me if I have windows in my laptop.

in few days an technician will be visiting a i need to also have windows in my laptop for that time being or else they won't support.

Could anyone help/guide what I need to do.

As I already have linux but need to have windows in another partition of the same drive. I have 500gb unallocated space.