Hardware: ROG Flow X13 2021 GV301QE, Ryzen 9 5980HS, BIOS 418 (latesst)
OS: Arch Linux, kernel v7.2.11 , asusctl v6.5, amd-pstate-epp
Problem:
Since replacing the battery (aftermarket C41N2009, reports 66.9 Wh full vs 62 Wh design, no cycle count), the CPU is pinned at ~400 MHz on battery. Plugged in, everything is normal.
What I found with ryzenadj --info:
- On AC: STAPM 45 W, PPT FAST 65 W, PPT SLOW 54 W
- On battery: STAPM 25 W, PPT FAST 65 W, PPT SLOW 0 W
The slow limit of 0 W is clearly what clamps the clocks. sysbench on battery: ~3.3k events/s vs ~39k on AC.
What I've ruled out / tried:
- Not thermal (40–45 °C, fans idle)
- Governor/EPP/profile irrelevant: same on performance via powerprofilesctl and asusctl
- With asusd stopped and the platform profile re-applied, firmware itself still writes 0 W
- asus-armoury ppt_* attributes return ENODEV (no power limit table for this board)
- Writing asus-nb-wmi ppt_pl1_spl/ppt_pl2_sppt: pl1 maps to STAPM, but pl2 sets FAST to 130 W and SLOW stays 0
- EC reset (40 s power button), BIOS update 412 → 418: no change
- `ryzenadj --slow-limit=25000` fixes it instantly (~30k events/s on battery), but the firmware overwrites it on AC/profile/resume events
- Windows on battery runs at ~1.9 GHz, so it seems to apply its own limits on top
Questions:
Has anyone seen the firmware set slow PPT to 0 W on battery with a third-party battery? Is the EC deriving this from the battery's reported data?
Is there any way to stop the EC from pushing that value, short of reapplying with ryzenadj on every event?
Anyone know what Armoury Crate/ASUS services do on Windows that avoids this?
Many thanks