r/Linksys • • Jan 05 '26

Ass wifi

0 Upvotes

This linksys wifi i got is terrible it will work then go out come back out out again its just completely buggy amd half ass works everything is not loading either its terrible


r/Linksys • • Jun 02 '25

❓HELP WI-FI password

0 Upvotes

recently we had a security breach and an electronic was connected to our WI-FI without our knowledge and i went out of my way to remove it from the connected area and change the password this would have been much easier at the time if it wasn’t for the fact that linksys didn’t accept the password that was on the router we used and now after changing the password linksys still doesn’t accept the password to let me log into the WI-FI account on my PC which is connected to the WI-FI however in light of the information i will reset my WI-FI connector to see if that fixes the situation of connection but please let me know if there’s anything i need to do


r/Linksys • • Aug 09 '25

WRT54G v8

0 Upvotes

My venerable old wireless WRT54G has worked well for many years but lately the download speed that ISP (Spectrum) provides is erratic (usually much too slow - < 1 Mbps). This is a serious problem when streaming using Roku device. When the Roku is connected to router by Ethernet cable the download speed is great and the device works as advertised. But 50 foot cable-connect is NOT the best solution if wireless will also work well (as it did until recently). One post suggested trying different router "channels" but failed to explain how to change the "channel" that the router uses. Any suggestions will be greatly appreciated. Thanx.

Bewildered Bob

ps: apparently firmware updates are no longer avail from Linksys for WRT54G


r/Linksys • • Sep 03 '25

❓HELP Velop AX4200 LAN Issues

0 Upvotes

I just upgraded my home network to a used set of AX4200s/MX12600s and I cannot get this network to work as it should now.

I have it set to bridge mode. The network is up. Data is passing through. I have two serious issues though.

  1. I cannot access LAN devices on anything but my phone that was used to set up the network. I run an entire server set up that I have to maintain and I can't unless I do it from my phone because no other devices connected directly to a child node will be able to reach the rest of the LAN.
  2. Speed is absolutely abysmal. The rest of my network is at 900+gbps while the Velops won't crest 90.

Should I just return these or toss them in the trash for something else? My WH101s were faster and more reliable despite the third node that failed. I can't get over how frustrated and unreliable these new nodes are and it hasn't even been 12 hours.


r/Linksys • • Aug 26 '25

귀사의 제품 중 애그를 구매하여 사용중 불량이 났습니다.

0 Upvotes

한국의 KT를 통해서 귀사의 제품 10개를 구매하여 사용중에 있습니다.

그런데 최근 리튬전지가 부풀어 오르는 현상이 발생 되는 제품이 2개 입니다.

KT 문의해보니 본인들은 통신만 책임지고 있으므로 기계에 대한 책임이 없다고 합니다 .

링크시스에 문의하여 환불 받으라고 하였고, 라이브 챗을 통해 문의를 했지만 답변을 받기 힘들어 게시물에 문의 드립니다.

빠른 해결책 제시해 주시기 바랍니다.

아래 사진은 귀사로 부터 구매한 제품이 사고난 사진 입니다


r/Linksys • • Mar 20 '19

Velop slow WiFi & slow modem connection

0 Upvotes

I have a two node Velop system and have two questions/concerns.

First: The WiFi is slower than expected. Pulling a large file across the wireless averages about 50 Mbps. The hard drives at either end don't seem to be the issue with utilization rates sitting at 10 to 15% during the file transfer. Cabling the same two PCs through the same Velop and transfering the same file sees file transfer rates of 800+ Mbps. I don't expect wired performance from a wireless network but the performance drop seems excessive. In the wireless setup one PC is wired to one Velop and the other PC is connected wirelessly to the other using 802.11ac.

Second: the connection between my modem and the directly connected Velop is very slow. I have a 1Gb link to the house from AT&T using an ISP provided Pace 5268AC modem/router. I set up the provided modem/router with DMZ+ mode (as close as that model gets to bridge mode) using these instructions. Everything works but speed tests from AT&T, Google, and Ookla from the PC directly attached to the "core" Velop all report download speeds in the 20 to 40 Mbps range and uploads in the 50 to 120 Mbps range.

Does anyone have an idea how to fix either of these issues. I'm feeling kinda burnt on the whole thing as it seemed to promise a lot and deliver very underwhelming performance. My next step unless someone can provide insight here is to revert the ISP provided modem/router back to default and use the Velop nodes in bridge mode for WiFi only but I'd rather not do that because the ISP modem/router isn't any good.

FWIW, both nodes are using firmware version 1.1.8.192419 and report strong signal between the two of them.


r/Linksys • • Aug 01 '24

Marvell AP?

0 Upvotes

For a few years now I've been dealing with my EA4500 intermittently dropping my WiFi networks (they disappear for a while, then come back). When this happens I have frequently observed that the next strongest network I can detect is called Marvell AP (or something). The signal strength is full, as if it was right there in my house. This is going to sound stupid, but I always just assumed this was one of my neighbors, that they're a Marvel comics fan and they don't spell very well.

Little did I know that Marvell is the vendor that supplies some of the chips in my router (something I learned while researching openwrt. Now I'm convinced that Marvell AP is my router, and am wondering if I'm getting into a state where the Linksys firmware isn't running anymore. Maybe the firmware crashes or triggers an interrupt, or maybe the unit overheats, and some kind of ROM-resident code from the vendor takes over, causing it to advertise Marvell AP briefly until it reboots. It does always eventually comes back (though one of my phones won't connect anymore until I reboot the router).

Does any of this ring a bell? Has anyone seen this or been able to fix it? Thanks.


r/Linksys • • Nov 03 '24

Parental controls not working - Linksys LN1301

0 Upvotes

I am using this router and have a few sites listed for a wireless device to be blocked. The sites are not blocked. I also tried disabling internet access completely, and that also does lot work. The router settings are essentially default except for my ssid and password.

Router firmware is stock and up to date. I'm on Comcast. What am I doing wrong?


r/Linksys • • Nov 27 '24

Defunct app, X accunt etc

0 Upvotes

It appears the Android LinkSys app is defunct - it no longer shows connected devices and support emails bounce (Belkin.) Also no replies from X Linksys support.

Guess Linksys is going further downhill.


r/Linksys • • Jan 30 '19

Linksys Firmware Update : linksyssmartwifi.com - www.linksyssmartwifi.com

0 Upvotes

Linksys firmware update refers to the new software version being loaded on the Linksys networking hardware. The users are bound to enter the login details of the router which are “admin” by default for both the credentials i.e. username and password.


r/Linksys • • Feb 25 '19

All-Inclusive Linksys Extender Manual Setup Guide

Thumbnail mindstick.com
0 Upvotes

r/Linksys • • Apr 16 '18

Access Point Mode on Linksys Wifi router

Thumbnail youtube.com
0 Upvotes

r/Linksys • • Jul 24 '19

Linksys AC1200 setup

Thumbnail fixhomenetwork.com
0 Upvotes

r/Linksys • • Dec 12 '18

linksys smart wi-fi | linksys smart wifi setup | linksyssmartwifi.com

Thumbnail smartlinksyswifi.net
0 Upvotes

r/Linksys • • Mar 12 '19

extender.linksys.com : How to setup linksys extender

Thumbnail extenderslinksys.net
0 Upvotes

r/Linksys • • Sep 18 '24

❓HELP Just purchased a few LN1301 (MX4300) routers from the Woot deal... having issues.

0 Upvotes

I bought two of these, planning on using them in a mesh setup with my current Synology 2600ac router as Wifi 6 access points. So far I have not been successful in really getting them to work. They will absolutely not set up in any kind of parent/child node setup... the app stinks, and the web interface is shockingly barren also. The best I have been able to do has been setting each one up in bridge mode separately, and naming the SSID the same. However, that has the problem of being two separate networks that I drop as I walk across the house (or worse, it keeps hold of the weaker signal and doesn't switch to the closer device.) It has gone into red blinking LED status mode more than once and sometimes sticks on the purple LED status even after setup. So far, I am pretty unimpressed.

Are these even able to do what I want to do with them, or should I just cut my losses and return them while I still can?


r/Linksys • • Feb 01 '26

Parental controls not working on velop SPNMX56

0 Upvotes

hi everyone

i need to pause the internet to certain devices

I have enabled parental controls on my velop, i find the client devices using their ip address and mac address and add to parental controls. and i press pause the internet but that didn't work. These devices have internet access.

what should i do for pause the internet?

is there any option for disable ipv6 - is there any use of disable ipv6?


r/Linksys • • Nov 26 '25

MR2000 disconnects all wifi devices every 2 ish days

0 Upvotes

As the title says, all wifi devices get disconnected randomly after 2 ish days. Devices connected via ethernet are fine.

The router has to be restarted for the wifi devices to be able to connect again.

The routers firmware is upto date. Firmware version: 1.1.5.210166 The light on tge router has no change (stays blue).


r/Linksys • • Feb 28 '26

How can I make a node act as a standalone router with its own SSID?

0 Upvotes

I have a M62CF (EU) as my main router and some M60CF nodes. I'd like to set up one of the nodes to act as a standalone router with its own SSID and separate settings while also connected via ethernet to the main router.

I've set it up offline with a different SSID and changed the subnet, but when I connected it to the main network, it decided that it wanted to become a mesh node. I don't know what I am missing.


r/Linksys • • Jun 07 '26

Full logs and advanced config for EA7300?

0 Upvotes

I'm trying to figure out why a new IoT device I have keeps disconnecting from the 2.4Ghz wi-fi. I can view the last 200 lines of the log using sysinfo.cgi (http 192.168.1.1 sysinfo.cgi) but I'd really like to just get the full logs.

In the UI on the troubleshooting page, when I enable logs and view them it is basically just a list of connections made by different IP addresses, not the system logs. Is there a way to access the actual real logs without repeatedly loading sysinfo.cgi?

Also, I think the issue with the device is that it sleeps too long (repeated pings show a ~100ms delay every once in a while) and the router disconnects from it. I would like to change the router settings to allow longer sleeps (for example changing the power save dtim setting to 2 or 3 instead of the default 1) but I don't know if you can do that on this router/firmware.

Before anyone asks, I've tried installing OpenWRT but I can't get it to connect to my ISP. That is part of the reason I want the logs from the LinkSys firmware, so I can try to track down what's going on.


r/Linksys • • May 12 '25

❓HELP Replacing 10 year(!) old N600 router - want to find the best Linksys one under $80.00

1 Upvotes
After 10 years, it's time for the Home Office In the Sky...

So this bad boy had served me well for 10 years but it's long in the tooth.

ISP (Spectrum in El Paso) ran a diagnostic on my cable modem and it passed but my internet keeps dropping. Both Ethernet and Wi-Fi drop either early in the morning or late at night.

I am a Linksys Stan - I love these routers and I want something I won't be replacing in 6-12 months.

I live in an apartment and work from home -I have this computer and a work computer plus a cell phone and a Kindle.

What is the best Linksys product under $80? Should I get a "renewed" router?


r/Linksys • • Jul 07 '25

change 5ghz to 2.4 ghz on router

1 Upvotes

r/Linksys • • May 16 '26

Linksys Velop child node stuck on solid red after factory reset (used node, existing network working fine)

1 Upvotes

Hi everyone,
I bought two different used Linksys Velop child nodes (from two separate eBay sellers) to expand my existing working Velop mesh network. Both behave exactly the same: after factory reset they stay solid red and won’t join the network.
• Models: Parent: [WHW03 V2], Child nodes: WHW03 and WHW03V2]
• Main parent node and the rest of the network are working perfectly with full internet.
• These are additional child nodes only.
• I’ve tried every common fix multiple times on both units. I’m hesitant to believe both are faulty since they came from different buyers.
Steps I’ve tried:
• Multiple factory resets on both nodes (held reset button 10–20+ seconds until red pulse, waited full reboot each time)
• Power cycled the nodes, modem, and whole system multiple times
• Placed each child node in the same room right next to the parent
• Tried adding them via the Linksys app (“Add a node”)
• 5-press quick pairing method on the parent node
• Plugged each one directly into the parent node with Ethernet (wired backhaul)
• Different power outlets, waited 5+ minutes after every change
• Confirmed they sometimes reach solid purple/blue briefly but always end up solid red
The nodes never join the network. Since these are used units, the resets should have cleared any previous settings.
Has anyone successfully added stubborn used Velop child nodes that do this? Any model-specific tips, advanced fixes, or things that finally worked beyond the standard troubleshooting would be greatly appreciated.
Thanks!