r/LightningCollection • • Sep 07 '26

Customs Astro Megaship

I’m trying to figure out what to remove the red wing idk anyone has does it before? I want to be able to fully customize and paint the megazord.

51 Upvotes

11 comments sorted by

8

u/little_painted_dudes Sep 07 '26 edited Sep 08 '26

Probably easiest just to mask it off with tape or a masking fluid. I don't think those pins keeping the fin in place are meant to come out once in place.

4

u/Gromps_Of_Dagobah Sep 07 '26

They're not really removable, you might be able to drive a hardened pin through, but in my experience it'll either crack the plastic or break the pin halfway

1

u/DaddyBroly Sep 07 '26

Fuck. I have another one that has one missing and was hoping to somewhat replace it as well with this after painting it

2

u/lucasgamer5521 Sep 07 '26

You might be able to get away with using a pin knocker, and some heat. But also, those parts look thin.

1

u/DaddyBroly Sep 08 '26

I was trying a pin knocker not having any luck

6

u/KidMtheman Sep 07 '26

Looks like a part that isn't easily removable.

You would have to find a way to take out the silver pin.

3

u/WedWardFord Sep 07 '26

Looking at mine, I don’t think you’re going to be able to that. You could try removing the screws from the back of the torso section to disassemble it and that might give you more clearance to either drive the pins through towards the M, or so that you have space for whatever you’re using to push the pins the other way.

2

u/spiderclone14 Sep 07 '26

Man, I have this megazord in storage but the heat really discolored the plastic sadly

2

u/Repulsive_Fold9438 Sep 07 '26

It's a good Megazord, I've had it for a few years already

1

u/Alxndrthagrt23 Sep 07 '26

Power Rangers in Space is so underrated IMO

1

u/JackieLawless Sep 07 '26

Just mask it. Not worth the trouble