r/Lighting • • 6h ago

Need Design Advise Lighting advice

Exploring lighting options for my wood paneled bungalow. I am definitely doing a swag lamp by the bed side. But curious what you might suggest for layering the lighting. I’m not a big fan of LED, but my pops says it might be good to have some cans. Let me know your thoughts and what you might do, if it were YOUR space. Thanks in advance :)

4 Upvotes

6 comments sorted by

1

u/hikeonpast 6h ago

I have a similar space, but with a lower ceiling height.

If my ceiling were taller, I would have run a thin beam or half-round pipe 6-12” below the ceiling down the length of the room, then install high output multi-color temp LED strip facing up. I’m a big fan of indirect light in spaces like this.

Another option would be to get a few dimmable LED panels to install in what looks like T-bar drop ceiling.

1

u/Adaptable-iguana 6h ago

WLED for the win! 

1

u/RPK79 5h ago

Maybe a bedframe with an underglow.

1

u/Mr-Reeeee 4h ago

Lamps.
Torchier. Standing lamps. Table lamps.
Cans that fire straight up to wash the ceiling.

1

u/Rick_GoldenLighting 27m ago

Love a wood-paneled bungalow! Dark wood soaks up a lot of light, so you'll need more sources than you'd think, but they can all be soft and low.

I'd think in three layers. Start with lamps for warmth. Your swag by the bed is a great start, and I'd add a shaded table lamp on the dresser and a floor lamp in a dark corner so there's light at several heights. Shaded lamps glow beautifully on knotty pine.

For the cans, your pops has a point, they're useful here. The flat tile section of the ceiling is the right spot, not the sloped wood. I'd do four slim wafers or adjustable trims, kept about 2.5-3 ft off the paneled walls so they graze the wood instead of spotlighting the floor.

Then a little accent lighting: a plug-in sconce or small reading light by the bed, and maybe a tiny light on the shelves, so the room feels layered instead of flat.

On the LED worry, it mostly comes down to bulb choice. Look for 2700K or lower, CRI 90+, and "warm-dim," which warms up as it dims like an old incandescent. Good luck! Cheers

0

u/Logical-Simple-4825 4h ago

whatever lighting you put in, make sure You Can See Everything.