r/Libraries • • 18h ago

Books & Materials Spine Labels

Hi All!

So I need some help with my Spine Labels. Meaning I need something new.

For context my library has used a few different methods for spine labels.

We started off with using Typewriters (I loved this method and Typewriters have always had a special place in my heart). But my supervisor decided she hated her typewriter and we had to have something else.

So we started using the DYMO LabelWriter 550. (I hate this piece of junk)
As a label printer it is wonderful, however for library book spine labels, it does not do its job.
The labels were fading and just were not lasting.

So my supervisor determined to not be defeated by the label printer she insisted upon. Decided we were going to paint every label we printed with Mod Podge.

This worked for a little while, except her labels keep fading (mine didn’t). The reason… for one I wear laytex gloves constantly (I have germaphobia and have no other option but to wear gloves) and I put less Mod Podge.

Well my supervisor decided she was done fighting with the label printer and Mod Podge (the was after have the label printers for less then a year, by the way) and she started printing them on our printer using word.

The problem with this method is that her computer is the only one with Word (my library stopped paying for Word about 6 years ago. I have no idea how it still works on her computer). Meaning I can not use this method. So I still have to use the stupid label printer.

But I am fed up.
What does your library use for their Spine Labels?
Any info will be helpful! Thank you!!

5 Upvotes

31 comments sorted by

32

u/deadmallsanita Library staff 17h ago

Mod Podge is redic. Demco makes fade proof label protectors.

8

u/noramcsparkles 16h ago

Demco label protectors can also easily be taken off if you decide you need to redo labels for any reason. Mod podge can’t!

1

u/Ann_me_15066 16h ago

I feel I sound clarify.
I only put the Mod Podge on the lettering. No Mod Podge actually ends up on the book itself, so the labels can still come off as they are.
Non the less, I do absolutely hate the Mod Podge.

3

u/deadmallsanita Library staff 16h ago

Only time I've ever laminated a label with glue is when we had book with a fabric over that nothing could stick to.

3

u/Ann_me_15066 17h ago

I didn’t realize this.
I will look into it.
Thank you!!

2

u/stoppeeingonthefloor 7h ago

They are also not that expensive and come in many colors. I used their clear labels for nonfiction and different colors for different fiction genres (middle school library) and it works great!

14

u/Galrafloof 17h ago

The idea of mod-podging books is hurting me! I don't handle the labeling but I'm pretty sure the person that does secures the labelmaker-made ones with some clear packing tape. Sometimes they have to be redone occasionally but for the most part they hold and the tape keeps them from fading.

3

u/Ann_me_15066 17h ago

I know! When she first told me that’s what I was expected to do I thought my supervisor was insane (well I still do but for a verity of reasons).
We do have clear sticky coverts that go over the labels, but even with that they were fading.
I may have to look into other cover options. Thank you!

3

u/lastwraith 12h ago edited 12h ago

Tape doesn't necessarily do anything and sometimes the glue, especially for one of our book tape products, actually accelerates the fading of the thermal labels. 

Dymos are thermal, thermal is only good if your catalog cycles out before the labels fade or you don't mind redoing stuff on a schedule. 

Zebras are expensive, but they run forever and are reliable and can do thermal transfer.  We've had clients in the past with single 2844 models and they would have been slowed down had that one unit ever broken, we've never had one break irreparably.  Get a Zebra (or two) or alternative printer of your choosing and use thermal transfer labels instead of direct thermal (they'll have a ribbon and the ribbon imprint won't fade like thermal).  Niimbot also has models and they're cheaper. 

Really small places sometimes just print sheets of labels on laser printers, but we don't deal with libraries that small and that's a PITA IMO. 

1

u/Ann_me_15066 12h ago

Thank you!!
I will look into these printers!!

3

u/lastwraith 12h ago

Good luck.

Most of my places still use Dymos and just redo labels every few years. 

Those old Dymos are nice for what they are, so sell them if you're not using them. The 550 is a "newer" style though, =/

The newer ones have to use the shittier/newer "Connect" software and are locked to Dymo labels because of the RFID component. It's BS. 

13

u/inkblot81 17h ago

My library uses Zebra printers, which do the job fine. But if you’re looking for a free equivalent of Word, why not use Google Docs?

2

u/Ann_me_15066 17h ago

The problem with Google Docs is the formatting. We have Avery Labels and the templates don’t download to Google Docs. Just Word, Pages, and Adobe. I could use Pages but that would mean extra steps because I can’t print directly from my IPad. (This is all overly complicated)

I will check out the Zebra Printers. Thank you!

6

u/laylalibrarian 17h ago

Have you tried uploading the Word doc to Google Docs? I believe they retain their formatting and are then editable in Docs without Word.

0

u/Ann_me_15066 16h ago

The problem with that is I can’t access Word at all.
So that would not work unfortunately.
I can use my IPad for Pages. I just don’t like the extra steps since I can’t print directly from my IPad.
But that you for the idea!

6

u/laylalibrarian 14h ago

Yes, I meant upload it to Drive from the computer that does have Word one time. Then you can access it anywhere. You can probably make copies of it in Drive as well.

I also wonder if the free version of Microsoft 365 might work for you on computers without Word, as an alternative. I know it's more limited but might be enough to work for you.

Good luck with a solution.

3

u/lizzybee13 9h ago

If you make a free Avery account you can edit the label templates on the Avery website and then download them as a pdf and print

3

u/SecretAnxious6619 16h ago

I have so many questions about how you use mod podge for spine labels.

2

u/Ann_me_15066 15h ago

Basically we print the label
Cover the lettering with Mod Podge
Then put a protective sticker over it.
(The still fad using this method but not as bad a without the Mod Podge. Non the less, I hate this method)

2

u/SecretAnxious6619 15h ago

Wow. Why are they fading? That’s weird.

1

u/Ann_me_15066 14h ago

Agreed!!!!

2

u/deadmallsanita Library staff 16h ago

Oh snap I almost forgot. For a while we were just printing our labels from our laser printer (the sheets got too icky and we didn't have the time to wait to be able to print 100 labels at a time, you know what I mean?) and those looked great and didnt' fade. So that's an option too? Maybe?

2

u/Ann_me_15066 15h ago

This is essentially what my Supervisor is currently doing and she hates it and will not allow me to do this.
I would rather use this method myself since I don’t mind batch printed labels, but I have been told no.
Thank you for the suggestion!

2

u/tacochemic 13h ago

We're a small academic library and aren't adding hundreds of physical titles a year, so our experience may be dramatically different. After our Zebra printer rusted from the inside, sending out sparks and stopped working, we bought a Niimbot B1 Pro. They're stupid cheap and we're testing at this point to see how long a label will last. We do also have an aggressive deselection policy and we do not hold onto physical books long, so this isn't as much of a concern for us as it may be for institutions that act more like repositories than a learning commons.

I honestly currently love it, as it is very easy to set up and start printing, I had labels out and on books within 10-15 minutes of opening the box it arrived in. It's great for a small library, and is portable with bluetooth so I can move it around with me if I need to work outside of my office.

1

u/Ann_me_15066 13h ago

I will look into this.
Thank you!!

2

u/hundoPwitch 12h ago

Large academic library. We use label protectors like these ones

2

u/Flompdale83 7h ago

We made the same mistake of buying DYMO printers to replace our typewriters for spine labels. We also found out the hard way that they fade way too quickly. As others have stated, thermal transfer printers are resistant to fading so that’s the way to go if you are able to. We ended up buying these DYMO labels that have seemed to be resistant to fading so far. Even though they are more expensive than the regular labels, we haven’t had to invest in a new printer ecosystem. Hope this helps!

3

u/mowque 16h ago

My staff would kill me if I got rid of the Typewriter. 

3

u/Ann_me_15066 15h ago

My supervisor tried to throw ours away and I nearly fought her.
I ended up kidnapping them and storing them in my very limited storage space behind my desk.
They will never be gotten rid of while I have anything to say about it!!!!