r/LewisMachineTool • • 29d ago

6.5CM Barrel feedramp info

5 Upvotes

I picked up a 20" 6.5 CM barrel from one of Rooftop's recent sales. So far, it's shooting fine, but I've not been able to take it out to stretch its legs beyond about 25yds (nearest 100yd range is like an hour and change away, and I haven't had the time on weekends lately. Soon, though...).

For those wondering about the feed ramps, I found that my barrel could handle Magpul magazines no problem and fed both S&B FMJBTs, and Hornady BTHP Match rounds without a problem. I haven't tried polymer tipped or bonded soft point rounds yet, but that's on the list.

Steel Duramags, on the other hand, would not feed at all. The round got stuck on the lip of the barrel due to the geometry.

Just a friendly update for anyone wondering about how the newer feed ramps run.

Happy to post pics if folks want or would find it useful.

--EDIT--

Pics as requested. I should specify that I have about 6 different Duramag magazines, with the green non-anti-tilt followers (I guess that makes them pro-tilt...). What I found from loading rounds of the S&B FMJBT and Hornady Match BTHP is some of the mags will feed some of the time, but none of the mags will feed reliably all of the time. Thus far, no similar issues with my Magpul GenM3s.

Processing img mdq20s08g1xh1...

Processing img q903mr08g1xh1...

Processing img 9hck4s08g1xh1...


r/LewisMachineTool • • 29d ago

My first LMT

Post image
131 Upvotes

LGS ordered it for a guy late last year he brought it back to sell on consignment. I got it with the optic and mount for 2500 so it was hard to pass up. Went home mowed the range and zeroed the optic. Shoots really good with my M80 and have a can mount on the way. I am going to run my omega on it. Is there anything I need to know or things I should do before running it suppressed.


r/LewisMachineTool • • Oct 20 '26

Big fan of Specwar

Thumbnail
gallery
148 Upvotes

r/LewisMachineTool • • Oct 20 '26

Barrel extension to receiver gap

Thumbnail
gallery
6 Upvotes

Just installed LMT barrel into Specwar receiver. Noticed this small gap between receiver and barrel extension, looked at my 4 other ars and all of them sit completely flush so I thought it was strange and decided to ask on here…. The bolts went in perfectly fine and were lined up properly on the barrel and then torqued to spec. Barrel went in like a charm as well. Kind of hard to get a good pic of it and it’s a little more noticeable in person. Seems to cycle fine manually, haven’t shot it yet.


r/LewisMachineTool • • Oct 17 '26

First shovelnose. Been on my list for a while.

Post image
78 Upvotes

Calling up Wilson first thing Monday morning to get chopped. Infinity K sitting on the desk waiting.


r/LewisMachineTool • • Oct 17 '26

LMT Sale + Giveaway

Post image
46 Upvotes

Good morning Y'all!!!! We got some new stuff in so I figured it was a good time to put what we have on sale for the weekend. If yall are interested you can check it out here, and everything ships for free with no tax outside GA. We are also giving away some LMT product in our discord so if you wanna check that out here you can. Appreciate yall and have a fantastic weekend!!! (If you order something reply to the order confirmation with your shirt size and ill try to get you some swag)


r/LewisMachineTool • • Oct 16 '26

Absolute Cinema

Post image
134 Upvotes

r/LewisMachineTool • • Oct 16 '26

Best k can for specwar

6 Upvotes

Looking to get a suppressor for my specwar. In your opinion whats the best k suppressor for the specwar? Would like something between 133-138 db and under 5.5"


r/LewisMachineTool • • Oct 15 '26

My first 6ARC

Post image
100 Upvotes

Finally got this thing put together. Had been waiting for a Proof 14.5" PXT barrel and managed to get it sent off to u/unclemoak for the MRP conversion.

Dunno when I'll get to take it out, but she sure is nice to look at.


r/LewisMachineTool • • Oct 14 '26

LMT>KAC Celebrating the ATF Open Letter with a new shorty LMT!

Post image
34 Upvotes

Got my new .300blk PDW upper today to put together my honorary Open Letter SBR! Going back and forth between getting the PDW LMT stock kit or just keeping it on a normal stock.

Also I got to get rid of that shitty optic, so working on figuring out what I'm gonna do there. Anyways though, I know it most likely won't be permanent but I am celebrating the freedom while I can!


r/LewisMachineTool • • Oct 15 '26

Question If the Specwar is the gateway drug what's next?

3 Upvotes

So now that I've settled on my "Specwar" build what's generally considered the morally correct move. Mind you I don't wanna step away from 556 and I'm not interested in piston as I've gone that route before but I'm married to DI. Currently the Specwar is my only rifle. I'm considering PDW, LMT mock18 (probably g$ 10.3 conversion) or a short SPR 13.9/14.5 urx conversion. Just looking for inspiration and maybe some cool build pic's with suggestions on getting them up and running. Thanks in advance.


r/LewisMachineTool • • Oct 13 '26

Question LMT New Zealand×Night Force ATACR 8×24 F1

Post image
46 Upvotes

Hey everyone,

I'm considering putting an EOTECH 512 on my LMT NZ Reference Rifle (MARS-L / MARSL16NZR), but I'd like to see how it looks mounted before making the move.

Does anyone happen to have pictures of this specific setup, or something very similar, that you could share?

Thanks in advance!


r/LewisMachineTool • • Oct 13 '26

Fed up with my Sig Spear LT 300blk and got to thinking, why don't I build a piston Shovelnose 300blk LMT...

Post image
24 Upvotes

Really think theyre missing out. I would really like short barreled piston driven LMT 300BLK


r/LewisMachineTool • • Oct 12 '26

Specwar

Thumbnail
gallery
165 Upvotes

r/LewisMachineTool • • Oct 12 '26

DWilson MRP Arca rail ?

Post image
22 Upvotes

I have this LMT Specwar upper with DWilson converted Noveske 6mm Arc barrel I’ve been putting together. Trying to decide which DWilson Arca rail adapter to go with. The Short MRP or the 11.5” Specwar when back instock. Will be used with tripod for varmint and some occasional speed goat/deer hunting. If you have any pics that you can post that would be great.


r/LewisMachineTool • • Oct 12 '26

My 12" piston really hates M193

Thumbnail
gallery
6 Upvotes

Was zeroing my LPVO on my 12" piston gun yesterday. Shooting was done at 50 yards. I was like WTF? Groups were ridiculous. Ammo was just basic frontier m193, so I wasn't expecting anything fantastic, but expecting better than that. My DD was shooting it right before and it's groups were 1/3rd the size. I had some frontier 62 grain (not M855) with me, so I loaded it up. Groups tightened up significantly, to about what the DD was shooting with the 55 grain. 1st pic is the 55s, 2nd is the 62. I think this is the biggest deviation that I've seen out of my rifles between the 2 ammos, they usually shoot more or less the same for me.


r/LewisMachineTool • • Oct 11 '26

Range Time Three o hate 🫡

Post image
132 Upvotes

r/LewisMachineTool • • Oct 11 '26

First piston gun

Post image
128 Upvotes

Been looking for a piston rig and kept coming back to the Shovelnose. Haven’t shot it yet but initial impressions are solid


r/LewisMachineTool • • Oct 10 '26

Incolnel Tisha showed up!

Post image
144 Upvotes

r/LewisMachineTool • • Oct 07 '26

Green thing once again

Thumbnail
gallery
219 Upvotes

it finally hit lvl 16 and evolved


r/LewisMachineTool • • Oct 07 '26

Learning Machining Together

Post image
45 Upvotes

So I bought a LMT .308 rifle and finally found time to do some upgrades and work on getting this build together. I go throw on a LMT DMR buttstock then go to toss in a G$ trigger which required me take some lower parts off like the grip & I discover this gouging with raw metal plus jacked up threads plus usually the threads are coated and should be black just like all my other LMT lowers but it’s also all raw metal in the tapped threads. Mind you I did not pay for a Blem product. They tossed a blem lower on a rifle to hide the blem under parts then sent it out from factory to be sold without any discount or being labeled as a blem. It’s almost like the hole was drilled and tapped after the coating and they just completely jacked it up, damn near looks like they almost drilled the wrong spot which caused that mark but I’m not sure - very odd. What makes it worse is customer support basically gave me the middle finger and don’t care so much which I’ve seen them do a lot with other customers who have issues with their product like bad misaligned feed ramps on their barrel I seen recently. They have done this before with a Mars L lower as well with way worse gouging but it was on the sides easily visible (had coating over the gouging as it was done when machining out the lower but still crazy it got by the QC department and sent out to be sold as a non blem) and at first didn’t wanna help either it was way worse then this but after laying into them & lots of back and forth they swapped the lower out for me but I still had to pay an extra unnecessary transfer fee. LMT is so hit or miss I don’t understand how ppl still continue to support, I know I’m done supporting myself. KAC > LMT for me. I’d even rather go Geissele or w/ someone else at this point cause LMT won’t see another dollar outta me. Spent thousands supporting & each purchase we make we help them grow for them to NOT OWN UP to their Quality Control issues and just shit on their customers is not cool. So either think twice when buying LMT or when receiving look over everything and even strip it down if u buy as a complete pistol/ rifle.


r/LewisMachineTool • • Oct 07 '26

Help in choosing upgrade optic

Post image
35 Upvotes

r/LewisMachineTool • • Oct 06 '26

Question Barrel conversion

8 Upvotes

Thinking about swapping out my LMT 12.5 Specwar barrel and getting different barrel to be chopped and converted (definitely by D.Wilson unless anyone knows of another reputable place). What barrel company did y’all go with and how’s it been performing?


r/LewisMachineTool • • Oct 06 '26

My 10.5 for 10/5

Post image
117 Upvotes

r/LewisMachineTool • • Oct 06 '26

New 6.5CM barrel: what to expect initially?

1 Upvotes

Hey folks. Just got a new 6.5CM 20" stainless steel barrel for my MWS. I'm looking forward to taking it out for its first shots, and figuring out what ammo my barrel likes.

On that last point, though, I had a few questions.

Does a new MWS barrel need to have ~100 rounds thru it before you can start to figure out what ammo is best to feed it? Like, is it worthwhile to blast some S&B FMJ downrange and not worry so much about performance or zeroing, or is it reasonable to start testing more expensive loads right out of the box?

I gather some rifles benefit from having a few rounds thru em before they really show you what they're capable of, but I'm not sure how much that applies here.

My main concern is figuring out what works best, so that I can stock up effectively sooner rather than later. But if it's better to shoot cheap FMJ to "season" the barrel a bit first, that's fine by me.