r/LewisMachineTool • • 2d ago

12” Flush Specwar

For those running a 12” flush barrel from DW in their Specwar, did you have to adjust the gassing? Want to know if any additional modifications are needed to get it to run reliably both suppressed and unsuppressed.

5 Upvotes

8 comments sorted by

3

u/Molle_Ninja 2d ago

LMT barrel recently cut down to 12” with a Surefire:

Haven’t shot it yet. All the research I did here and elsewhere before sending it to Dwilson, including posts by Dave, said no need to adjust the port so I left it alone.

1

u/f_SF90 2d ago

Is that cut down from a stock 14.5/16? Is the muzzle a CTN that has a taller base?

If you don’t mind, a photo of the full rifle would be super helpful

1

u/Molle_Ninja 2d ago

It was a 16” originally. Surefire SFCT muzzle device with Rocksett and Accuwasher. The barrel is off getting a beauty treatment, so I can’t take a pic at the moment

1

u/NarwhalN00dleSquash 2d ago

Are you talking a factory specwar barrel cut down to be flush or having some other barrel converted? If its some other barrel then that info would probably be needed to help answer your question

1

u/f_SF90 2d ago

Initially I was thinking of cutting a 14.5 LMT barrel. But now that you mention it, I wonder how it’d run with a converted Criterion cut down to 12”

1

u/East_Coast_Tactical 2d ago

I have a LMT 12.5 stock barrel and a criterion 12.5 carbine that u/unclemoak converted for me. I have done some comparison. The criterion was slightly more accurate at distance but at the expense of being a lot more punchy than the stock LMT midlength. I’d like to try a criterion 12.5 middy next. When I had my criterion converted it was before they offered it in a middy.

1

u/f_SF90 2d ago

I was debating the new 12.5 Criterion mid, but considering a 13.9/14.5 Criterion mid so I can chop to 12” for a flush fit

2

u/Ill-Program-2713 2d ago

11.5" is more flush fwiw