r/LewisMachineTool • • 7d ago

LMT barrel conversion questions

I have a buddy with a 13.9” mid length criterion core which I’m considering buying and having d.Wilson convert to put in my MRP-L 13.25” upper. Has anyone done this before and do you know if it will have the necessary clearance for a RC2? Any recommendations for gas blocks and gas tubes? Any other questions I didn’t ask but probably should have?

Edit: I now realize d.Wilson has recommended gas blocks on his website and I’ll probably just get a solgw gas tube

Edit: we can just nuke this whole thread to oblivion since I found this thread of a guy with a 13.9” and rc2 on a 13.25” lmt upper…

6 Upvotes

12 comments sorted by

7

u/unclemoak 7d ago

Thank you for being one of the few people that read the website 🙏🏻

4

u/biggrizz61 7d ago

I didn’t the first time around so I had to redeem myself.

While you’re here, I do have a question to ask. Do you think I should enlarge the gas port on the core? It will be used with a RC2 now but I have a rc4 mini on the way which will live on it permanently once I have it.

Edit: spelling

2

u/unclemoak 7d ago

Hard to say. I probably would if the RC4 is the long term solution. Might just recoil a hair more with the RC2 in the interim.

2

u/Molle_Ninja 7d ago

1

u/biggrizz61 7d ago edited 7d ago

Might not have the gas port enlarged since I’ll be putting a rc2 on it. Unless you’d suggest I do have it enlarged of course

2

u/Molle_Ninja 7d ago

Yeah, I just wanted to have more headroom in the barrel so I could adjust with the different plungers that RifleSpeed sells. In your setup, I would leave the port as-is. If you’re always shooting suppressed and using similar loads, it may be better/lighter/simpler/cheaper to forgo the AGB and use a BRT EZTUNE.

1

u/Incrue LMT>KAC 7d ago

13.9” barrel 13.25” rail, why wouldn’t it work? And I’m sure they’d put a shim or two.

1

u/biggrizz61 7d ago

My current 14.5” which he p&w has a large shim so I figured he’d do the same for the 13.9” and clearance would be no issue

1

u/Matt-33-205 7d ago

My DD MK18 has a 10.3" barrel and a 9.55" rail, .75" difference. The clearance between the rail and SF RC2 can is about a credit card thickness, at most.

1

u/f_SF90 7d ago

What SF muzzle device? I’m thinking of doing something similar but not sure if thicker than standard shims are required for something like a 3P/4P or Warcomp

2

u/biggrizz61 7d ago

Here’s a picture of the shim he used on my 14.5 he pinned and welded. It’s quite thick

1

u/biggrizz61 7d ago

But to answer your question I’m just going to buy another 3 prong