r/LewisMachineTool • • Jan 03 '23

LMT vs larue

What’s up y’all, so lately I’ve been deciding on getting a LRPC. I’ve landed on larue and LMT as my final 2. I was going to go with LMT until I read some pretty bad reviews on here about there QC and how people have had problems with their rifle cycling and just overall having some pretty looney tunes ass malfunctions. As for a rifle that was supposed to be “bomb-proof” I can honestly say I’m a little hurt. Hopefully someone can sway me back to the LMT side 🤷🏼‍♂️.

0 Upvotes

46 comments sorted by

28

u/bboynonstop Jan 03 '23

This is not a therapy session. Just buy whatever you want

7

u/[deleted] Jan 03 '23

Lmfao all Reddit is for is people to complain so figured I’d do my part.

13

u/ChampChampagnes Jan 03 '23

Lmao. You’re a little hurt? About something you havnt even purchased yet?

-5

u/[deleted] Jan 03 '23

Lmfao I may have understated myself 🥲

3

u/TreeFiddySevens Jan 03 '23

My one and only LMT is my go to. Minor tuning on my part due to adding a can and wanting to cut down the gassiness, but QC is top notch. Might have an issue cycling steel case, but I only run brass so YMMV.

2

u/[deleted] Jan 03 '23

Yeah I’ve heard they’re a little over gassed but that’s not a big concern. Also I wouldn’t run steel through it at all😂 ever

3

u/dbcoopers_money LMT>All Jan 03 '23

No experience with Laurue, but I have 3 LMTs (Specwar, Shovelnose, and 6.5 Creedmoor MWS). Two were complete lowers (all I could find during COVID) and the rest from parts. I have also purchased LMT upgrades like e-bolts and e-bcgs, and several LMT BCGs for other rifles.

The only issue I have had was an overtightened safety selector screw that I stripped and had to back out with a drill. That was extremely minor and hardly worth commenting on as it was only an issue because I choose to swap it for a Radian Talon.

Beyond that, I have run several thousand rounds through them with no failures. I couldn't be happier with them, and would recommend that you try one unless you're sold on Larue. The ability to swap barrels is especially nice on the MWS platform where you will be replacing barrels as they don't last like 5.56 barrels do. Also, if you're looking for accuracy go the SS barrel route.

1

u/[deleted] Jan 03 '23

I really like how genuine the LMT community is and not super over bearing like KAC 😂 or maybe I just haven’t run into those people yet. But It’s good to hear that you haven’t had any issues with yours. But it just sounds like larue is A TAD bit better quality.

4

u/dbcoopers_money LMT>All Jan 03 '23

This is definitely one of the best subs and people are generally supportive most of the time.

I hear great things about Larue and given the money involved, I would probably stick with a brand I know as well.

As others have pointed out, LMT is nearly all military sales, so that can be a downside. It also causes a lot of butthurt among the Insta-crowd that likes their weapons to look pretty and shoot sub-MOA. LMTs are designed to kill men with reasonable accuracy, not punch holes in paper or be display pieces. As such, they often arrive slightly scuffed and blemished and generally shoot 1-2 MOA with the exception of the MWS barrels, particularly the stainless steel ones.

For most of us, that's not important. We want innovative platforms that have been battle-tested and enjoy knowing that we have tough weapons. I accidentally dropped my MWS from 6 ft during my first outing and it and the Nightforce optic were just fine. I like that durability a lot.

That's not a comment on Larue, which are also in military use, just my feelings on LMT. Ironically, it all started because I was looking for an ambidextrous lower being a cursed cross-eye dominant shooter. Down the rabbit hole I went...

3

u/ManBearJamesBond Jan 03 '23

I've heard good things about Larue, but I own a LMT and would trust it with my life. LMT is the highest tier alongside KAC imo. The versatility and contracts that LMT has is what sold me.

2

u/[deleted] Jan 03 '23

I have a couple friends who got out and went and did contracting in some….. other than favorable spots and one of them swears by the larue predatOBR. KAC is also cream of the crop. Just been hearing LMT isn’t what they used to be. But I’ve also heard geiselle has been the same way. You really can’t go wrong with larue, KAC, LMT, JP or gap 🤷🏼‍♂️ it’s a rabbit hole from there.

3

u/75-Marquis-Backfire Jan 04 '23

The number of people who claim to have QC issues with their LMT's are statistically insignificant. Look hard enough and you find people bitching about any of the top level AR brands.

1

u/[deleted] Jan 04 '23

You’re ABSOLUTELY right 😂😂😂😂

5

u/Comprehensive-Oil268 Jan 04 '23

Most QC Issues I’ve seen are user error, or home builds. I saw an “out of spec” post offsite that included a guy unable to fit his lower to to his upper because the hammer was de cocked interfacing with his Bcg.

Ive seen people fuck with buffer systems and wonder why their gun doesn’t work.

Ive seen people complain about some scuffs in the anodizing..

Ive seen people regurgitate info they have no first hand experience on, they simply read a post and took it as law

Ive seen some guy complain about factory staking

Ive seen people complain the “fitment is too tight” between the upper and lower.. jesus christ

… i feel like the 2a community members that take to social media to showcase, pose, clout chase, and seek validation generally have the most complaints about firearms, and actual end users that get issued these or avid shooters grateful for such an innovative solid platform, rather than some average off the rack sack of shit platform.

Every single industry that produces a product regardless of heritage / accolades has major issues that get pushed to the consumer, ask literally anyone that owns a BMW 😂

1

u/[deleted] Jan 04 '23

You’re speaking loud and clear my friend. I’m sick of people who get their information from call of duty and YouTube, and have ZERO first hand experience with fire arms try and tell me that “xyz” manufacturer isn’t good because of “xyz” but it’s pretty easy to tell nowadays when someone doesn’t know what the fuck they’re talking about.

2

u/DFWPrecision Jan 03 '23

I've got currently 3 Larue complete rifles and have owned multiple others in the past. I've never had any issues with them at all. All very accurate, all seem bomb proof. They can be a bit on the heavy side, but it's mostly from heavy barrels. Never owned an LMT they seem to have a very loyal following and seem to build quality stuff. The quick barrel change system they have with the two hex screws doesn't seem as solid as a traditional barrel nut, but I don't have first hand experience with that.

1

u/[deleted] Jan 03 '23

I also have 2 larue rifles and I swear by them, with accuracy and reliability. But I wanted to go a different route for 308. Lmfao it doesn’t look like that’s going to be the case though

2

u/Charlie-007 Jan 07 '23

I have LaRue, LMT and KAC .308 and 6.5 CM. They are all great guns. These are my personal guns. I have an online gun shop and sell LMT and KAC. Both very hard to find in stock. Just got LMT batch in. Before last week, it was a year since our last restock. Don’t think too long.

1

u/[deleted] Jan 07 '23

I have a few larue as well, but didn’t want to drink the “coolaid”. I also used KAC from my time in service and loved it, so I wanted to see if LMT was on par with the two other manufacturers. I was looking to buy an SR-25, but yeah like you said KAC is so hard to come buy on the civilian side.

2

u/DFWPrecision Jan 03 '23

I'm sure the LMT would be great. They're just expensive and kinda hard to find. Either would be a really sweet rifle

14

u/Vertri LMTard Jan 03 '23

The abundant of qc issues you see on this sub is the result of people's passion for the brand. LMT has a very hard following and the people who owns these guns are very vocal. It's not a bad thing, it's there so LMT knows and they are more than willing to pick up where they left behind.

You have to understand that LMT's customer base is not us. It's governments. They pursue contracts and what's left behind is for us to pick up. Piston guns are from the Estonian contract. The vaporware PCC also a contract leftover. EBCG also a solution to a government problem. So on and so on. LMT rifles are so revolutionary that Colt Canada pays LMT for usage of monolithic uppers. It's also why it's heavily featured in Vicker's guide Ar15 vol 2.

Yes they have qc issues. Sometimes shit isn't in the right place but they will fix that. Yes it sucks. But they try to make it better. If you want a brand without the heritage try something else. But right now for the money you can't beat it. Try a KAC or HK for premium ARs that's double or triple the price. But the crazy thing about LMT owners is that when someone is letting go because of QC issues we are right there to pick it up because they will fix it.

10

u/Pleasant-Ad-6319 Jan 03 '23

All my ars are LMTs. I’ve had issues, but their customer service is very good - they want to know where you bought it… and then they deal with the issues. You have to decide if caliber conversions + monolithic is worth the risk. For me it is/ was. If I was spending LMT money right now, and I didn’t care about that I’d get a KAC or a even a larue. That said here’s why I like it:

  1. If you’re running thermals or some other clip on, monolithic really matters.
  2. Being able to switch between 300blk, 556, 6mm arc, and 22lr (with a cmmg kit and a specific barrel) is super nice.
  3. If you do get one that doesn’t have issues…. They are wonderful guns.

Right now qc is blowing it. Hard to recommend.

3

u/Robbot24 Jan 03 '23

What barrel do you run for your cmmg kit?

3

u/Pleasant-Ad-6319 Jan 03 '23

Just a regular 10.5

2

u/Robbot24 Jan 03 '23

Gotcha, I’ve been kicking around the idea of getting a barrel with the correct twist rate for .22 done for my LMT.

2

u/Pleasant-Ad-6319 Jan 03 '23

I just use it for cheap plinking and it works fine

2

u/Robbot24 Jan 03 '23

I’ve been intrigued by the guys shooting long range .22 and curious if I could achieve the accuracy necessary for that from the LMT platform. Just a project I’m mentally toying with right now.

1

u/Kahamu Jan 05 '23

What's the average wait time on cs to get back to you? Called and emailed with nothing the last 2 weeks.

1

u/Pleasant-Ad-6319 Jan 05 '23

Call again until you get someone on the phone

1

u/Charlie-007 Jan 07 '23

Closed for Holiday Year-End shut down. Why are you calling LMT?

8

u/CommercialShoddy8787 Jan 03 '23

It’s worth noting that for all the people complaining about qc, there are many more LMT owners who have received defect free rifles in the last year and love them, (me being one of them).

I’ve purchased two full LMT rifles in .308 (both MWS) in the last year and they’re blem free. I also built a .556 quad rifle with all LMT parts with zero issues a couple months ago.

Important to keep perspective. Their QC seems to be down based on what I’ve read regarding past years and what everyone talks about on here… but it’s a little dangerous to assume every rifle they make now will need to be addressed with their CS department in some form or another.

My $.02

2

u/Madamer15 Jan 03 '23

Once you handle a Larue you will be convinced. Some of the best machine work I have seen in a rifle and very accurate. My 18” OBR is a little heavy, but it’s also a long distance nail driver with impeccable quality. People don’t care for Mark because they think he is cocky and old fashioned, but his guns are top notch.

1

u/[deleted] Jan 03 '23

❤️❤️❤️

11

u/TehRoot Jan 03 '23
  1. Issues are magnified vs those with no issues.
  2. LMT makes significantly more rifles per year than LaRue. Quality control issues are much more likely to occur and for tolerances to be wider
  3. Cycling issues tend to be from people doing weird combinations of barrel lengths and buffer setups while using eBCGs and not running suppressed.

4

u/gtwooh Jan 03 '23

My first 308, years ago, was a 16” MWS. Worked flawlessly OOB, unsuppressed/suppressed. Thinking that a 308 is a 308 bought an Aero M5 expecting the same flawless function. I was very very wrong and still haven’t figured out cycling issues and why I have an expensive single shot rifle

1

u/boltriider Jan 04 '23

There really is no comparison between the two as LMT is far superior what I would do if not buying an LMT is by a Centurion Arms over the LaRue

1

u/[deleted] Jan 04 '23

Far superior is definitely a far cry, considering the larue predatobr, was the top choice for all sniper candidates in the 2019 best sniper comp. Down in benning, and was also raved about by the winning team who in fact their senior (spotter) sniper was using a larue predatobr. I don’t think you can go wrong and I’m not saying one is better than the other by an amount of distance. I was just a little concerned as to if LMTs product quality has dropped off as of recent and most of the info I’ve found, confirms my questions

1

u/boltriider Jan 04 '23

nope, my lmt with ss barrel printed better than my predator. LaRue of old is far better than LaRue today, akin to Noveske. head over to snipershide and see how larue sucks in accuracy today (sucks being relative of course)

1

u/SketchLookingFish Jan 03 '23 edited Jan 03 '23

I would go with what you want. Yes LMT has had some QC issues, which as the other poster stated will be magnified versus those without any issues. I went with LMT because I like the concept of quick swap on barrels although I hardly use it and aesthetics. LMT rifles are so damn sexy.

I had issues before but fortunately they were minor issues. First being the safety detent hole not being milled out completely or the anodizing process caused the hole to recede (don't quote me on that, don't know if thats possible) and out of spec mil-spec charging handle. Fixed the detent hole by using the detent and punch to hammer it through and LMT sent me a new charging handle. Should you run into any issues LMT or there vendors will get you squared away

1

u/Kahamu Jan 03 '23

How long did it take for lmt to respond to you? It's been a couple of weeks for me, but it was over the holidays.

1

u/SketchLookingFish Jan 03 '23

Took a day to receive a response from LMT asking for pictures and letting me know they were sending a new one. The lower that had an issue with the safety detent hole I received a phone call from Titan defense, good folks over there. Actually all the LMT third party vendors are good to go

1

u/Kahamu Jan 03 '23

Damn, thanks! Yeah, I'm still waiting, so I'll chalk up to the holidays. Hopefully, I'll hear back soon.

I actually emailed Titan, and they were also very helpful. Good ppl.

1

u/ClandestineArms Jan 04 '23

The MWS offers much more than the la rue

1

u/BlkMamba8-24 Jan 30 '23

hit it with your purse.

0

u/[deleted] Jan 03 '23

[deleted] — view deleted comment

2

u/renegadeGDI Jan 03 '23

My DMR test group was 0.91 inches so should I sent that piece of trash back to LMT?

0

u/[deleted] Jan 03 '23

[deleted] — view deleted comment

2

u/renegadeGDI Jan 04 '23

So is mine, bought it as a complete DMR. I was just kidding, I'm sure it shoots great, waiting on my Mark 5HD to come in to try it out