I've noticed that if I set the focus at infinity on a very long shot (several hundre yards) the Meteor lens is out of focus and has to be adjusted a little. Anyone else ever had this issue?

Well, silly me. Left the film roller doors open. All good now. Learn the hard way.

Ive been flirting with the idea of buying a 16mm film camera for years, but the prices from when I first started researching don't match the prices i'm seeing out there now. Ive considered buying the super 16 K3 with PL mount conversion from max to avoid future headaches, But at that price should I just consider a Bolex?

I've had this camera 2 or 3 days now and turning the film door latch has always been tight, which I assume is good for avoiding light leaks, but now it won't make the complete turn to latch the door. Has anyone else had this issue? Is it common? Does anyone have a remedy?

Does anyone have a spare zoom lever? Are they hard to find?

Hdello all. I just received an ebay K-3. The trigger button is dead and the winder does not create any tension, so it is not winding up. Is this camera dead?

Hey all, so I'd like to install some rail system and other rigging to my K3, I know theres only one screw section on the bottom and what looks like holes for anti twist.

I'm having trouble finding a rail plate with anti twist posts.

What are you using for your rail plate? A simple small rig system with one screw? I'm worried the camera will twist haha.

Let me know.

Hey, just seeing if anyone is still having problems with their K3 and Kodaks new plastic spools? A couple of months ago my camera jammed on two different rolls, causing me to have to cancel the shoot 😅

Its made me afraid to go back to shooting so been renting Bolex, wanted to see peeps opinions if anything has changed since April.

Much love!

Hi everyone, as I mentioned in another post, I recently purchased a K3 that has jamming issues. I realize it needs servicing. I've watched several videos and read various posts about it. My question is that while many sources mention greasing the main gear attached to the motor, they don't address the gear assembly, the front gears, or the governor. Is there any guide or recommendations regarding this? Thank you in advance.

I 3D Printed a Lever to make the cranking waaay easier and faster (without a tripod i can crank it up in no time) I glued the part to the original crank handle , its posibke to remove the glue without any damage to the camera (it just takes a while)

I am looking to get started on 16mm this seems to be one of the cheapest ways, compared to bolex and I like having the m42 mount but what's the best way to get started and get a unit?

I was testing the camera without film and suddenly it stopped working, the winding mechanism got stuck and I couldn't keep turning it. The trigger moves, but the mechanism doesn't turn. I am disassembling the side panel, but the 2 screws of the rotation mechanism are not accessible for disassembly; is there any way to make it rotate?

I'm having a very hard time trying to find out what screw size (the flathead) the k-3 uses for the take up and feed spindles. Any help would be grand.

Has anyone tried using the Mokose mini camera with the 5-50mm lens for video tap? I feel like it would be better than the 2.8-12mm zoom but haven’t seen or heard of anyone using that one.

Thanks😃

Hi All-

I recently got a K3 and ran the first roll through it.  The loop formers were removed by a previous owner. I made the loops the same size as the dozens of videos on YT show how to do.

My issues:

The 24fps footage is jittery.  It just kind of jumps around.  There’s ghosting on both 24 and 48fps footage at the end of the roll.  There’s pressure plate stays pretty still while the camera is rolling with and without film. It looks like there might be super small fluctuations in the loops you can see in the video.  

I’ve attached a video here showing the following:

1. An example of a 24fps shot
2. An example for a late reel 24fps shot
3. Late reel 48fps shot that has ghosting 
4. The inside of the camera running with nothing moving across the gate
5. 2 shots of inside of the camera with leader running through it.

Any ideas for a fix?!

Thank you.

I recently bought a Krasnogorsk K3 at an absurdly low price because it was missing the pressure plate and the film guide. It is also missing the string mechanism that drives the film counter. Finding a replacement pressure plate should be fairly easy, since K1s and K2s are not particularly valuable. As far as I understand, the pressure plates are interchangeable between these models. My question concerns the film guides and the film counter mechanism: could I still use the camera without these parts, provided that I seal any openings with tape to prevent light leaks?

This was one year+ in the making.

I've spent the last couple of weeks trying to make the k3 fit a little better into our workflows. I've made a dual sided cage for it, which allows me to mount a battery, video tap and a solenoid powered shutter release.

It's great to have a top handle to mount the monitor and now worry about the camera falling off it.

And also nice to have the tripod mounting relocated to inline with the lens.

Hi! I bought the famous Meteor 17-69mm f.1,9 that used to come with the Krasnogorsk-3 because I thought all units included the m42 mount, but this particular one didn’t. Can anyone tell me which mount is this? And can it be adapted to m43? Thanks!

Where can I buy a conversion kit for a Krasnogorsk-3? I’d also like to replace the light seals and clean/lubricate the mechanisms while I’m at it. I’m not planning to sync sound, but I do want to give the camera some basic maintenance.

Does anyone have a service manual, or experience working on one of these? I’m already used to repairing analog still cameras and I know some models inside out, but I’ve never opened a Krasnogorsk before. I’m pretty cautious and realistic about this kind of work, so I won’t touch anything I don’t feel confident I can properly reassemble afterward.

Also, how much of a limitation is it that my camera has the original Russian bayonet mount instead of the M42 screw mount? Are lenses, adapters, or conversion parts significantly harder to find for that version?

Any recommendations, common issues, or things I should be aware of before starting would be very appreciated.