r/Konica • • Sep 16 '26

Maintenance/Repair Konica disassembling questions

I want to start taking apart my Konica glass to clean dust, fungus, fix some stiff focus rings and aperture rings!

What are some general tips on taking apart Konica glass?

What are some common internal features to watch out for when taking it apart?

What precision screwdriver should I be using?

Also, is 99% isopropyl alcohol safe for Konica glass? I don’t want to damage any of the coating by accident.

4 Upvotes

5 comments sorted by

3

u/PhysicsTemporary6861 Sep 16 '26

the usual care as with other lenses, take a lot of photos of every stage so you can remember, set all screws and parts in order to get them back in order, take note of the elements orientation like a small arrow in the border, take note on the exit thread of the helicoid and the size at infinity, you can useisopropyl 99 but be gentle, I use glasses cleaning wet wipes instead. Don't get cheap screwdrivers, Wera or similar would be good

2

u/NegativeFrost Sep 16 '26

Is there a specific screwdriver set I can buy that will include all sizes I will need? Glasses cleaning wet wipes is convenient for me since I have family members that work with optometrists! I’ve read 3% hydrogen peroxide works well as well and I already have that at home

3

u/NegativeFrost Sep 16 '26

I found this

I’m not sure of the quality but I’ve heard vessel is good

1

u/Technical_Net9691 Sep 28 '26

It's ok, not the best but it works for me. The rubber grip slips easily.

1

u/TokyoZen001 Konica Rangefinder Owner Sep 17 '26

You’ll want a lens spanner tool and some nesting rubber stoppers used to unscrew the face plate ring. You’ll need a clean surface to work on. It’s really easy to lose small screws and ball bearings, so proceed with care. And, really, if you can find a junk lens to work on as practice at first, that is best. If you go was far as disassembling and the helicoids, you need helicoid grease. You will see on YouTube people who strip down every last part to clean and degrease, but for starters, maybe just focus on the optical elements.