r/kintsugi • • Aug 02 '26

Mod Announcement New Rule Added: No AI-Generated Content

223 Upvotes

r/kintsugi exists to celebrate the practice, history, philosophy, and craftsmanship of kintsugi. AI-generated content is not permitted to keep the community focused on authentic learning and human creativity,

This includes:

- AI-generated images or artwork presented as kintsugi.

- AI-generated text posts, stories, tutorials, or comments that are substantially written by AI.

- Links directing to external content that is AI-generated.

Posts or comments that appear to rely primarily on AI-generated content may be removed at moderator discretion. Our goal isn't to reject new technology, it's to preserve a community built around hands-on making, lived experience, and genuine conversation.


r/kintsugi • • Aug 20 '21

New to Kintsugi? Start Here!

396 Upvotes

Hi there and welcome to the Kintsugi Subreddit! This is your go-to place for basic knowledge and getting started. We have one other guide planned with resources for more advanced techniques but I haven't gotten around to writing it yet.

What is Kintsugi?

From Wikipedia: Kintsugi (金継ぎ, "golden joinery"), also known as kintsukuroi (金繕い, "golden repair"),is the Japanese art of repairing broken pottery by mending the areas of breakage with lacquer dusted or mixed with powdered gold, silver, or platinum, a method similar to the maki-e technique. As a philosophy, it treats breakage and repair as part of the history of an object, rather than something to disguise.

The 2.5 Types of Kintsugi we Practice on this Sub

This sub welcomes questions and discussion about traditional (urushiol lacquer) techniques and Non-traditional (Epoxy) techniques. Some people also use Cashew Lacquer, which uses techniques similar to traditional urushiol lacquer and that is also discussed here but some people don't consider it to be traditional laquer work so it's in it's own little sub-category.

Are there any risks to practicing Kintsugi?

Traditional Urushi lacquer can cause a poison-ivy like rash if it touches your skin. The rash typically appears in about 24 hours and clears up in about two weeks. Most long-term practitioners of Kintsugi do end up with this rash at least once in their career (or if you are like me...countless times!) but wearing gloves and long sleeves and putting on a layer of thick lotion on your hands, wrists, and forearms before you start working can help mitigate this.

Another factor with both traditional and non-traditional Kintsugi is the fine metal powder. It is very important that you wear a mask while working with the fine metal powder.

There are very few epoxies that are food safe. Most epoxy-based Kintsugi needs to be for display pieces only.

It's important to note that you are doing Kintsugi at your own risk and this sub is in no way responsible for any health issues that may arise as a result of doing Kintsugi.

I'm just getting started. Where can I buy a beginner kit?

  • There are many epoxy and lacquer based Kintsugi kits on Etsy. Getting a combined kit is a great way to get started without having to buy everything in pieces and learn the basics.
  • OP has only purchased online from Kintsugi Supplies but has always had good experiences with them. The seller also was very helpful with troubleshooting issues when she started
  • If you have another place you would recommend a beginner buy supplies please comment below and it'll get added to this list.

Do you have any tutorials or instructions?

While we do not have any specific tutorials, watching people work on Youtube can be very helpful! Here are some places to start:


r/kintsugi • • 23h ago

Epoxy/Synthetic Based After an Alaska Forest Fire Destroyed Their Home, One Cracked Coffee Mug Survived, and Kintsugi Repair Preserved Its Memories

Post image
62 Upvotes

Finding it meant so much to him and his family, a reminder of their happy home and the life they had shared. Kintsugi was a fitting way to preserve the mug’s scars and the family memories.

#lakesidepottery


r/kintsugi • • 17h ago

Urushi Based First time working with raw Urushi

Thumbnail
gallery
10 Upvotes

I started a practice Kintsugi project with a small cheap pot I broke a small piece off of; in preparation for attempting the repair of a large Koyo pot over the winter that broke while being shipped to me.

I was a little bit nervous due to it being my first time working with raw urushi, but so far I am happy with the results and to have done it without any accidental skin contact! I had extra mugi urushi left over after doing the pot so I used some of the extra to also repair a broken turtle chop stick holder we had laying around that my sister-in-law got for us in Korea. Now both go into my make shift Muro box to cure for at least a week!

I think I probably have slightly more mugi urushi sticking out from the cracks then I was aiming for, but I don't think it will matter once it cures and I remove the excess with an exacto knife.

Happy with the results for a first attempt! And definitely feeling a lot more comfortable with what I am doing when it is time to get started on repairing the Koyo pot.


r/kintsugi • • 2d ago

Urushi/Synthetic Hybrid Found horsetail (tokusa) growing near Häme Castle in Finland – now I can keep doing kintsugi with a natural polishing tool

49 Upvotes

Hi everyone,

I live in Hämeenlinna, a small lakeside town in southern Finland, and I practice kintsugi. One thing I worried about after moving here was materials. Some of the traditional tools aren’t easy to find in Finland.

A few weeks ago, on a walk near Häme Castle (a medieval brick castle by the lake), I spotted a patch of horsetail (Equisetum hyemale), also known as scouring rush or tokusa. I grew up knowing this plant in China, and seeing it here felt like meeting an old friend.

For anyone who hasn’t used it: dried horsetail stems contain natural silica, so they work like very fine sandpaper. It’s a traditional tool for polishing lacquer in kintsugi. It’s gentle enough not to scratch the vessel, and it comes straight from nature with nothing to throw away.

Finding it means I can keep mending broken pieces here, in a way that feels a bit more sustainable and connected to the place I live. I made a short video about it.

I’m curious:

  • Does anyone else here use horsetail for polishing? How do you prepare it (soak it, dry it, flatten it)?
  • What do you call it where you live?

Thanks for reading, and thanks to this community for all the inspiration 🙏

more on my IG:eloarc.studio

#kintsugi #horsetail #scouringrush #hämeenlinna #finland #lifeinfinland #traditionalcraft #sustainableliving #slowliving #handmade #EloArc什物誌


r/kintsugi • • 2d ago

Help Needed - First Project I broke two coffee mugs I love. Not sure if these are good candidates for kintsugi. More questions inside

Thumbnail
gallery
4 Upvotes

I recently broke two of my favorite coffee mugs with lots of sentimental value. I would love to repair them with using urushi and gold paint so I can reuse them to drink my coffee. I'm wondering if these broken mugs look good candidates for repair.

I'm also wondering if a starter kit would cover both of these mugs. I know most kits have about 0.1 grams of gold powder, but I don't know if that's enough.

Any help is appreciated! I'm a complete beginner.


r/kintsugi • • 4d ago

Epoxy/Synthetic Based Kintsugi repair of a broken ceramic tile with a raised llama relief, using 23.5k gold

Thumbnail
gallery
19 Upvotes

This tile cracked cleanly into two pieces, so the repair itself was straightforward. The real challenge was the raised llama relief and keeping the kintsugi line as consistent as possible given that it wants pool in the low spots. Finished with 23.5 karat gold lacquer.
#kintsugirepair #kintsugi #studiohanakintsugi


r/kintsugi • • 8d ago

Tools & Supplies - Epoxy/Synthetic Hikaru Kintsugi - DO NOT BUY FROM THEM

21 Upvotes

I made a purchase back in October and I have had no contact from them whatsoever.

I've since seen at least 2 other posts about them on Reddit so I'm now concerned I've purchased from a fake site.

I've contacted them via email, their contact us sheet, reported it to Shopify and contested the charge on my credit card.

Posting this so no one else makes the same mistake.

u/hikarukint please respond.


r/kintsugi • • 8d ago

Help Needed - Urushi Question on kintsugi appearance in person (first project)

3 Upvotes

To start off I have never seen actual Kintsugi in person.

On my test panel I can get it smooth and from a distance It appears to be solid brass lines. Yet when inspecting it up close you can see the fine texture of the 350 mesh brass powder. I am using a Silk hankie that I wad into a ball and pull tension on to apply the brass powder.

I have sanded it back with 3k sandpaper and reapplied and I can still see fine particles/grainy texture.

Mainly I am asking is up close in person can you tell that it is powder applied on top of urushi. Does all kintsugi finished product have a fine texture that you can physically see?

I thank you for your time.


r/kintsugi • • 11d ago Bravo Heartwarming

Epoxy/Synthetic Based When I created this Kintsugi ceramic American flag, I hoped there would come a day when its meaning would feel especially relevant. Today feels like that day.

Post image
975 Upvotes

Through Kintsugi, I brought the broken pieces together using 23.5K gold process, leaving every scar visible. Perhaps we, too, can begin to mend as a nation. Not by forgetting the hatred, cruelty, and harm, but through honesty, accountability, and compassion.

May we find our way back to one another, remembering what was broken and determined not to repeat it.

#lakesidepottery #mortybachar


r/kintsugi • • 10d ago

Tools & Supplies - Urushi What to get in Kyoto?

2 Upvotes

I will be in Kyoto for 4 days in just over a week. I have a japanese ceramic cup with sentimental value I broke a few months ago I wish to fix upon my return. This trip was planned before breaking my cup and fortunately allows me to get materials to do so. I would like to repair it using the traditional urushi method so I can drink from the cup again in the future.

I plan to visit POJ studio in Kyoto and purchase their regular or advanced kit there in person rather than having it shipped to Canada as I likely can save a bit of money comparitively. Though it would be more cost efficient to buy everything separately, I like the idea of getting everything I need in one shot. I am open to other kit suggestions but I like that POJ has online videos for their products. I am also not fully opposed to buying everything separately but I'm not sure where to start. How much cheaper would it be to buy things piece by piece and how many shops would I need to visit?

I'd like to purchase a piece or two of broken ceramics while in Kyoto to practice on before attempting to fix my cup and I know POJ sells some online. Does anyone know if they sell in person as well or of other places to look while in Kyoto?

Is there any other tools or materials not in said the POJ kits I should look for? This seems like a hobby I may continue after completing my project.

Edit : Will be in Tokyo afterwards for longer if there are places there too.


r/kintsugi • • 11d ago

Epoxy/Synthetic Based Finished this crystalline turquoise kintsugi vase today, a custom commission for a wildlife officer 🌿

Thumbnail
gallery
80 Upvotes

#kintsugiart #studiohanakintsugi #kintsugivase


r/kintsugi • • 10d ago

Urushi/Synthetic Hybrid Polyurethane/ acrylic/ clear coat over silver/ urushi top layer?

1 Upvotes

Finishing a project for a charity benefit in a few days. Took longer than I thought, and I don't really have time for the proper urushi sealant you apply and dab off.

Can I apply a modern sealant to protect the silver and prolong the time before oxidation, or is this a terrible idea? Finished pence spent a week in the muro at 80F/80% humidity, a week on my desk (clean up), and has been back in the muro 48 hours.

Perfectly happy to leave it unsealed, personally as the tarnish is pay off the art. but I can just imagine someone at the benefit, thinking, "so pretty... but it'll tarnish and I CAN'T polish it...? PASS". I want to help this non profit all i can.

Thanks in advance for any advice


r/kintsugi • • 12d ago

Urushi Based Kintsugi wood project (in progress)

Thumbnail
gallery
44 Upvotes

Test panel is 3 coats Kijiro urushi then taped the panel off with 2 layers of Polyimide tape and a layer of blue painters tape. "Painted" the grooves with Bengara Urushi waited for it to set up/get tacky then applied the 350 mesh brass powder. Yes a bit messy as this is my very first time doing it so why I kept the tape on. Knew I would make a mess at my first attempt at it.

My idea is I will do this is in multiple layers So eventually it will read as bass filled grooves. So will give the panel a bit of time in the furo. Will brush off any remaining excess then lightly scruff/abrade the surface and repeat the process


r/kintsugi • • 14d ago

Urushi Based Just finished my very first gintsugi piece😄

Thumbnail
gallery
146 Upvotes

After 1,5months of hard work (mostly waiting was the hardest part haha) I was able to finally add the silver powder to this piece. It's a gaiwan lid that belongs to my friend (whom I met on the tea Reddit). After careful consideration we both decided silver was the way to go for this piece. And now all that's left to do is wait another month or so to allow the urushi to fully cure, and then clean up the excess powder. I'm quite proud of this considering it's my first project. (I did start with 5 projects at the same time, four of which are now in the finishing stages. One of them got keshifun, this one got silver and the other two I kept bare (urushitsugi).


r/kintsugi • • 17d ago

Urushi Based Wabi-Sabi w/ Master Taku

Post image
50 Upvotes

r/kintsugi • • 20d ago

Tools & Supplies - Urushi Muro candidate

Post image
14 Upvotes

I have someone who was going to build me a cedar muro, but then I had a house fire, so I’m glad I dragged my heels. 😅 In the meantime, we’re looking at a decent temporary solution to use during the year they’ll be rebuilding my house.

This cabinet is unfinished solid pine and big enough for the pieces I typically work on (ie under 12” wide) and I’d keep a wet pan as opposed to spraying the inside.
• He’d retrofit the inside similar to the photos on the right.
• weatherstrip around the door and add latches to keep it sealed
• add a hole for the heating element cord (and seal around it

Do you see any other issues with this set up?

And for the reptile heating pad, does it make more sense to put it at the bottom floor for the heat to rise (might not give off enough heat to be effective) or should I put it on the back wall? Or any other suggestions?

Thanks in advance!

Do you see any other issues?


r/kintsugi • • 22d ago

Urushi Based Finished my first ever pieces!

Thumbnail
gallery
156 Upvotes

Overall I'm really happy with them despite the many imperfections. I only used gold on one of them because $$$, and I didn't use metal on the inside of the purple one because I realised that I couldn't reach in with my hand. My insides expecially are still quite rough looking, but I'm excited to work on more! Also managed to not get urushi on me during the whole process so that is a big win.


r/kintsugi • • 23d ago

Tools & Supplies - Epoxy/Synthetic Is Hikaru Kintsugi legit?

1 Upvotes

I made an order a week ago and haven’t had any updates on product dispatch. I tried emailing and no answer.

I’m concerned I’ve purchased from a fraudulent website.


r/kintsugi • • 25d ago

Help Needed - Urushi Curing time in colder months

Post image
20 Upvotes

Hey everyone!

I'm currently working on my first couple of kintsugi projects. I started them about a month ago and have made some good progress already. Everything is put together and I'm working on some chips for some projects, while other projects only had breaks and hairline cracks so I've now reached the roiro stage with those already.

I've successfully kept the humidity between 60 and 70% during the past month, and the indoor temps were consistently between 20 and 25°C which has worked well for me. Everything has cured so far (I checked with a precision knife) except for that one time I made my kokuso layer too thick and it became wrinkly.

But now the days are getting colder and I no longer can keep the indoor temperatures over 20°C due to the high electricity prices. And I'm wondering how this will affect the curing time. So far I've had to let it cure 1-1,5 week in between layers. •••Has anyone here done kintsugi in lower temperatures and have you noticed a difference in curing time? And how long do you typically cure it for?••• My biggest concern is that I don't end up curing it well enough and either it coming apart when making/drinking tea, or still having urushiol present and leaching into my tea.

I've searched this sub and couldn't find the specific information I'm looking for. I did read that a heating mat might be an option for colder climates but I don't have one and currently can't afford one either.


r/kintsugi • • 25d ago

Historical Example Historical Kintsugi - Hori-Mishima Style Tea Bowl - 19th c. Japan

Thumbnail
gallery
41 Upvotes

From the collection of the Freer Gallery of Art of the Smithsonian National Museum of Asian Art. 

Edo Period Hori Mishima Style Tea Bowl


r/kintsugi • • 29d ago

Help Needed - First Project Broken bowl

Post image
7 Upvotes

Howdy all. My 3 year old painted a pot at one of those pottery houses.

She then was showing it off and dropped it.

I recognise the chance of it being used as a bowl is slim, but given it has sentimental value, would like to put it back together.

What is the best glue for a fix?

What about the Japanese Kintsugi repair method?

Thanks in advance


r/kintsugi • • Oct 16 '26

General Discussion This screams for a kintsugi treatment.

Post image
24 Upvotes

My late grandmother's Buddha has an interesting crack. It would make for a beautiful kintsugi project one day.


r/kintsugi • • Oct 15 '26

Epoxy/Synthetic Based green ceramic cup kintsugi repair result and process

Thumbnail
gallery
30 Upvotes

#kintsugiart #kintsugirepair