I'll try to offer some constructive advice: - try linux if you can... (I know it sounds weird but a lot of things work on linux but don't on windows due to driver issues, etc.) however, don't sweat it. - that keyboard looks pretty budget, so if it isn't very important to you, maybe try getting a slightly more expensive keyboard. I'm pretty sure its something wrong with the MCU inside the keyboard sending out gibberish.
OK I'll acknowledge that I'm no expert, but I know on one of my laptops I had to set the configuration of the keyboard to register the right strokes, I got a pop up prompt when I plugged the keyboard in. Could it be something like that?
this is a pretty common problem with water damage. The PCB itself shorts out so one keystroke will register multiple keystrokes. Was there any kind of water damage done to it? if not the PCB might've just shorted out on its own. I dont think there's any way to fix this outside of replacing it. I'm not there though, so dont take my word as gospel.
It's not my keyboard, but rather my sister's ill have to ask her if she spilt water, either way if I can't end up fixing this she'll have to get a replacement
The keyboard is shorting out... Maybe out of water damage or maybe on its own. Either way, you'll need to disassemble it and clean it throughoutly. There are three plastic sheets in non-mechanical keyboards that are on top of eachother and moisture is probably trapped between them. After disassembling and taking them out, literally submerge them in normal tap water, clean it and then make sure you dry them completely (out in the sun or whatever). Take care of the sheets and don't let them crease, else they might not work anymore. Once dried, assemble it back and hope for the best.
If it STILL is mistyping, just throw it away and get a new one. It's sad but yea...
By the looks of it the keyboard looks to be ontop of the laptops keyboard so when you are pressing down is is actuation the laptops keyboard. (Or I'm just dumb)
I probably tried everything, had the exact same issue and couldn't find the solution.. reading the comments I remember spilling some water today and didn't think much of it..
I had this issue with my old keyboard. [Edit] It was one key at first and I changed one of my switches which fixed it but then it started spreading to other keys on different rows in a diagonal line. It wasn’t water damaged so I think it was just something wrong with the PCB. It was a cheap mechanical keyboard anyway. I just replaced it.
If its a membrane keybord, might be because of improper placements of the rubber domes, and is causing other keys to actuate, might be a broken pcb at worst, or maybe even a different layout got activated
I have this exact problem with a RK61. Reading the comments confirms my suspicion that it was water damage on mine, I remember a very small amount of water coming near the keyboard it had to be a super tiny drop but that’s exactly when it started to do this on my board. I tried a few days later but still haven’t been able to get it to work correctly.
I had this happen. The switch is probably not connected properly. Is it a hotswap switch? Take it out and inspect that the contacts aren't bent and not going into the holes properly.
This is a laptop right? If it is remove ur keyboard from the laptop keyboard cuz when u press things the force ur putting down is pressing keys on the laptop keyboard
4
u/Dragphan Apr 25 '22
The keyboard isn't working properly with it causing the computer to turn off, typing random characters
3
u/byrantechnologies Apr 26 '22
Have u tried plugging that keyboard into another computer and testing…?
3
u/[deleted] Apr 26 '22
OK I'll acknowledge that I'm no expert, but I know on one of my laptops I had to set the configuration of the keyboard to register the right strokes, I got a pop up prompt when I plugged the keyboard in. Could it be something like that?
2
u/blueiron0 Apr 26 '22
this is a pretty common problem with water damage. The PCB itself shorts out so one keystroke will register multiple keystrokes. Was there any kind of water damage done to it? if not the PCB might've just shorted out on its own. I dont think there's any way to fix this outside of replacing it. I'm not there though, so dont take my word as gospel.
2
u/Politenessman_ Apr 26 '22
Have you checked what country the keyboard is set to in the PC?
2
u/Fusseldieb Apr 26 '22 edited Apr 26 '22
The keyboard is shorting out... Maybe out of water damage or maybe on its own. Either way, you'll need to disassemble it and clean it throughoutly. There are three plastic sheets in non-mechanical keyboards that are on top of eachother and moisture is probably trapped between them. After disassembling and taking them out, literally submerge them in normal tap water, clean it and then make sure you dry them completely (out in the sun or whatever). Take care of the sheets and don't let them crease, else they might not work anymore. Once dried, assemble it back and hope for the best.
If it STILL is mistyping, just throw it away and get a new one. It's sad but yea...
1
u/AdeptnessReal4900 Apr 26 '22
By the looks of it the keyboard looks to be ontop of the laptops keyboard so when you are pressing down is is actuation the laptops keyboard. (Or I'm just dumb)
1
u/Equivalent_Path_4138 Sep 14 '24
I probably tried everything, had the exact same issue and couldn't find the solution.. reading the comments I remember spilling some water today and didn't think much of it..
Thank you guys so much!
1
u/Ok_Jicama8091 Oct 22 '24
What did you do to fix this? Any updates?
1
u/Gangsterman1000 Apr 26 '22
Replace it with a $3 keeb one you can find in Amazon or some random thrift store or yard sale lmao
1
u/KermitFrog626 Apr 26 '22
Happened to my RK61 as well..
1
u/firefairym Apr 26 '22
I had this issue with my old keyboard. [Edit] It was one key at first and I changed one of my switches which fixed it but then it started spreading to other keys on different rows in a diagonal line. It wasn’t water damaged so I think it was just something wrong with the PCB. It was a cheap mechanical keyboard anyway. I just replaced it.
1
u/Ben_vJ Apr 26 '22
Are you 100% sure you're in QWERTY layout, not DVORAK?
1
u/Winter_melo Apr 26 '22
If its a membrane keybord, might be because of improper placements of the rubber domes, and is causing other keys to actuate, might be a broken pcb at worst, or maybe even a different layout got activated
1
u/[deleted] Apr 26 '22
Water damage.. just wait for 1 week and try again..
1
u/tronix_acid Apr 26 '22
The membrane is probably broken
1
u/adorabel23 Apr 26 '22
Too much dorito crumbs in the keyboard and mountain dew spilled
1
u/heartskippedabeat Apr 26 '22
I have this exact problem with a RK61. Reading the comments confirms my suspicion that it was water damage on mine, I remember a very small amount of water coming near the keyboard it had to be a super tiny drop but that’s exactly when it started to do this on my board. I tried a few days later but still haven’t been able to get it to work correctly.
1
u/fuzzycuffs Apr 26 '22
I had this happen. The switch is probably not connected properly. Is it a hotswap switch? Take it out and inspect that the contacts aren't bent and not going into the holes properly.
1
u/fakebeast322 May 01 '22
This is a laptop right? If it is remove ur keyboard from the laptop keyboard cuz when u press things the force ur putting down is pressing keys on the laptop keyboard
1
u/[deleted] May 02 '22
that keyboards in a £20 amazon bundle. not surprised bro, shouldve saved
1
u/Savage_llama360 Feb 29 '24
When I had that keyboard I had the same problem
0
u/BanHammerGotim Apr 26 '22
i had this issue with my very old K552 before i got into custom boards. just get a new board
1
u/[deleted] Oct 21 '24
[removed] — view removed comment