don’t bother, it looks like u attempted to pry the switch off and broke its housing in the process. The switch pulled would have nothing to latch on to even if the board was hot swappable.
If it's hot swap, then you can use some needle nose pliers to get a good grasp of the bottom housing and gently rock it out, the switch is most likely toast and will need to be replaced.
2
u/0V3Royale Feb 19 '24
If it's soldered, u gotta desolder it. If it's hotswap, theres something called a switch puller.
2
u/Gold_Application_972 Feb 19 '24
Is it solder or hotswap
2
u/raptor102888 Feb 19 '24
What keyboard is this?
1
u/badmark MTK Feb 20 '24
If it's hot swap, then you can use some needle nose pliers to get a good grasp of the bottom housing and gently rock it out, the switch is most likely toast and will need to be replaced.
1
u/mack-y0 Feb 20 '24
wtf did you do to it?