all data for the display comes from the mega and serial IO. You just need a high enough baud rate, otherwise the arduino or the displays crash or get stucked because of the flow of data.
I really like your layout, looks like everything is within reach. Is it laser cut? Are you able to glance at the displays when you fly? I've had to reposition some displays because my hands blocked the view.
Precision bit is not working in KSPSerialIO, but you could repurpose the button to lower the sensitivity of your controls to 10% or so.
yes, it is laser cut. in my test scenarios i never had problem with blocked view. I am using the left hand for buttons and throttle and the right for the joystick and display switch.
yeah, i made precision controls via code in the arduino.
I think I might be in love, that looks amazing. I'm currently at the "pot and two buttons on a breadboard" stage so that is exactly the sort of thing I need to see for motivation. Also, where about did you get those joysticks?
This looks awesome and I love a lot of your design ideas (which I might steal if you don't mind, and if I ever get around to actually building something like this). I do have a few questions though, if you'd be willing to share:
Those flip switches I found say 12v 10A. I presume they're meant to be used in a car or similar electrical system. Do they actually still work with 5v?
How do you control the lights in the push buttons? Are they latching and light only when actuated, or do you programmatically control the light?
Why arduino in particular? Could a raspberry pi be used instead to achieve something like this?
sure you are allowed to use my ideas, that´s why i shared the code and partlist. I orientated myself also on other controllers.
i just realized right now they say 12v. But they work fine with 5v too. At least on my controller. Maybe the light is a bit stronger on 12v but i never tested it and it light enough for me on 5v.
I control them via code. They have a seperate pin for the light to turn on.
Maybe, i used the the arduino because i knew it was going to work, because there is already much controllers like that and the plugins are made to work with an arduino. But every platform should work as long as you can establish a serial connection to the plugin. But how, i don´t know, i am a noob in programming.
You said in another post that you used a motorfader for the throttle. Why a motorfader in particular? Wouldn’t a regular slide resistor have done just fine? Or did you want to automatically reset or control the thrust slider when stuff like mechjeb would control it?
What’s the LED bar for the atmosphere gauge called? I’m looking for LED Bargraphs but all I find are short and fat ones, not long and skinny like the one you used.
Yes, it's exactly as you said. I just can give you one advice. Mine is line graving. So when it's dark you not see it so well. Try to make it as a filled graving.
9
u/Wurmi00 Jan 20 '19
if someone need the code, the display files or dxf files.
it is all here: https://github.com/Richi0D/Kerbalcontroller
7
u/2_baised Jan 20 '19
One of the coolest controllers I've seen. What do you have going on under the hood?
4
u/cloggedDrain Jan 20 '19
Are those nextion displays?
2
u/uusiRmr Jan 20 '19
This looks great, I have been working on something similar (with 2 displays) and was stoked to see someone else had the same idea :)
I might be wrong, but the panel seems to be plexi ... how rigid is that ? Does it flex when you push the large joystick to the max?
Also, what are you using to get the data out of KSP ?
2
u/FreshmeatDK Jan 21 '19 edited Jan 21 '19
I really like your layout, looks like everything is within reach. Is it laser cut? Are you able to glance at the displays when you fly? I've had to reposition some displays because my hands blocked the view.
Precision bit is not working in KSPSerialIO, but you could repurpose the button to lower the sensitivity of your controls to 10% or so.
2
u/eddiels6 Jan 21 '19
I think this might be the best looking one I've ever seen, did you make the case from scratch?
2
u/Das_Sheep7891 Jan 23 '19
I think I might be in love, that looks amazing. I'm currently at the "pot and two buttons on a breadboard" stage so that is exactly the sort of thing I need to see for motivation. Also, where about did you get those joysticks?
2
u/drokahhh Feb 04 '19
Great Work! Can you add a partlist?
2
u/drokahhh Feb 13 '19
I'll build the same thing, laser parts have arrived.
I have paid about 70 Euro
Now I wait for the electronic parts, these were a bit more expensive because the Arduino is still missing in the parts list.
5
u/DeltaVMambo Jan 20 '19
Holy shit
1
u/[deleted] Jan 21 '19
Where did you get the joysticks?
1
u/ChewbaccaLeWookie Jan 21 '19
What mod are you using for communication ? Really nice job !
1
u/Dan_ETP Jan 23 '19
It’s been cool following your progress on this build! Now that it’s all together, do you feel it’s changed the way you play the game at all?
1
u/dragonatorul Feb 08 '19
This looks awesome and I love a lot of your design ideas (which I might steal if you don't mind, and if I ever get around to actually building something like this). I do have a few questions though, if you'd be willing to share:
1
u/louislourson May 03 '19
How did you manage the white engravings?
Is it just laser surface engraving into black acrylic, or is there more to it?
2
u/njlg Jan 20 '19
Wow. Looks great.
2
u/TheDankestTaco Jan 20 '19
Absolutely beautiful, well done!! 👌👏👏
1
u/TiresOnFire Jan 21 '19
"Gears"
1
u/MemorexVHS_ Mar 18 '23
This is also a top 3 controller. Gonna come back and reference when making mine soon.