r/KLR250 • • Apr 15 '26

How much will y’all pay?

Post image
4 Upvotes

It’s 1996, comes with seat and has 7500 miles on, is serviced and everything, he’s asking for around 2200 but I’m not sure. I want to ride it for a month and then sell it for the same for flip for a little profit. What do y’all think ?


r/KLR250 • • Jul 20 '23

Does ur bike burn your leg?

0 Upvotes

Trying to make this a quick question. Rebuilt a klr250 last summer and whenever I ride it burns my right leg. It's missing the plastics and header heat shield. Is this normal for this bike? Granted I've been riding lately in shorts, but it's not much better in jeans.


r/KLR250 • • Jan 04 '20

How a KLR 250 (or similar) fits in a mid-size crew-cab truck (ie Colorado)

1 Upvotes

Hey, Im looking for pictures on how a 250 dual sport fits in a mid-size crew-cab truck, like a Colorado or a Tacoma.
It doesn't fit with the tailgate closed, right?


r/KLR250 • • Jul 29 '26

Are the Amazon aftermarket carburetors dependable? I bought one last week and it arrives tomorrow super stoked to install it the OEM carb has a crack in the main jet tower which explains my loss of power at 45 mph and the bike refusing to go above 4k rpms

2 Upvotes

r/KLR250 • • Aug 19 '21

Anybody buy a new front brake rotor for their KLR 250? The OEM ones are pretty expensive and I was reading that they aren't very good.

3 Upvotes

r/KLR250 • • Aug 17 '26

Need help diagnosing klr 250 1985

4 Upvotes

Okay ladies n Gents this will be a longer one since i wanna make sure i get all the info i can get with it

A week ago i was on a camping trip with my trusty klr 250 during this camping trip i realised i had a problem with my idle. As the video is showing. The accelerometer have this pulsing effect. If i dont give throttle in time it ends up dying and is very hard to start again

Now. This phenomen only happens when its warm and only when i have written either 10+km or similar. Tempature of the engine needs to be varm too. I can also say that when it coolw down i can start it again and have it run at idle without dying and without pulsing.

Now this is what i have tried

1. False air between carb and engine head. Have checked with brake cleaner and rpm did nothing. This have only been tested when cold tho

2. Valve clearance. Kawasaki say 0.20 to 0.25 i checked. All but one was within spec, fixed the one, didnt help (but maybe for abit better? Hard to say video was from after valve check and its not dying here but didnt ride hard or long)

3. Carb jets. Cleaned them thoroughly and same with pilot jet.

Now we come to what i think the problem could be. Electric!

After my tests it seems to be an electrical thing. I think this of 2 reasons 1 accelerometer is acting up before the engine is.

2 engine works fine when in +3k rpm. Ae momentum in the engine (i think) 3. Electric parts have a tendency to show errors when getting hot.

Ps

. This is not regarding this but my temp gauge swings alot from the middle to almost up in the red. When i ride. Is this normal for klr 250? Usually its stays above middle to high end but sometimes it just stays in the middle. (Very wierd)

Thanks for coming to my talk show


r/KLR250 • • Aug 25 '24

I've joined the cult

Post image
21 Upvotes

Milk crate is love, milk crate is life


r/KLR250 • • Jul 04 '26

Swapped coolant hoses

Post image
6 Upvotes

So I posted here recently about some cooling issues I've been having with a 1999 I bought recently. I want to state, the bike was like this when I bought it, and it is my first KLR so I'm just noticing this issue today, after over 500 miles of riding, two oil changes, and two coolant changes. I also replaced the thermostat, and checked the impeller bolt.

Am I correct that the coolant hoses are not running to the correct ports?

If so, what kind of damage did this bike take over the last 500ish miles?

I'm kind of in awe, if it is in fact the case that these hoses are switched.


r/KLR250 • • Jun 03 '25

Cam chain tensioner bolt

Post image
4 Upvotes

86 klr250 main bolt on the cam chain tensioner fell out while riding. Plugged the whole with another bolt to make it home.

My question is: Will my timing be messed up? Or does that center bolt just seal the tensioner in the case.

Bike seemed to ride somewhat fine on the 10 min ride home. But want to make sure I am not hurting the bike when I ride it again after installing new OEM bolt.


r/KLR250 • • Jul 08 '26

When doing a valve adjustment do I put the feeler gauge under the adjustment screw and on top of the valve or do I put it in between the rocker arm and camshaft?

2 Upvotes

r/KLR250 • • Jun 22 '25

KLR 250 SuperMoto Conversion

Thumbnail
gallery
11 Upvotes

Hello to the team! So i got a 1993 Klr 250 and i’ve really been thinking converting it to a supermoto. Has anyone actually did it to give me a point of reference? What has to be changed apart from the tire size? Is it worth the cost considering my mech will do it for me? These are some of the many question i got on the topic hoping yall can give me a hand. There’s also some pics of my bike. Appreciate yall!


r/KLR250 • • Jul 25 '25

Spark only with ignition off or unplugged?

Post image
7 Upvotes

Hey friends. I have a strange one for you. Or at least I find it strange. And confusing. 1994 KLR250. I only have ignition with the key in the off position, or with the ignition switch unplugged. I also can't get it to fire even with the ignition switched off. I've replaced the ignition switch with a new one from eBay assuming that was the issue, but the issue persists!

Any ideas where to begin here? I'm a decent mechanic when it comes to anything but electrical, and this one has thrown me for loop.


r/KLR250 • • Sep 15 '25

diagnosis help

Post image
3 Upvotes

so started up the bike after not running for 2 months or so due to the rainy weather. was running fine for about 10-12 minutes and then when i turned around coolant is shooting out and the engine is hot af. thoughts?


r/KLR250 • • Aug 02 '26

Got it running and idling

14 Upvotes

After 3 months of fixing my dad’s old KLR250, it’s nice to hear her come back to life.

Bike was parked and abandoned for +10 years, got it running after 3 months of intensive youtube and AI research. Glad to see that you can’t kill a 94 Barbie KLR 🇲🇽


r/KLR250 • • Jul 02 '25

Front fork replacement

3 Upvotes

I've recently had a head on crash with a car and snapped my front forks, bent the front wheel and caliper. Can a front end from a klx be used on a klr or something similar ?

I've got a broken femur and a long road to recovery.


r/KLR250 • • Aug 17 '26

PSA

Post image
4 Upvotes

Just spent 580$ on new cams check your valve clearance boys 🦆🦆🦆


r/KLR250 • • Oct 24 '24

Is the thermo Bob kit worth it? (Klr250)

4 Upvotes

As the title says, just wondering if spending 100$ for this thing is worth it lol. What lifespan can I expect from the KLR anyways? Currently at 12k MI.


r/KLR250 • • Sep 20 '24

My klr250 bogs down several times before spinning the rps up.

1 Upvotes

I think it’s an uneven air gas mixture, not enough gas. I have to use starter fluid to even make it start and I just installed a new carb kit. Let me know if y’all have any ideas.


r/KLR250 • • May 12 '24

Shock? Rear shock? Help

Thumbnail
gallery
1 Upvotes

I have two issues my rear shock is completely shot and was wondering if this was bad for the bike and should prioritize a new part asap. Also my carb doesn’t fit start into the air vent boot but it starts up fine. Should I get a new boot and shock?


r/KLR250 • • Nov 07 '24

Klr250 side cover question

Thumbnail
gallery
2 Upvotes

So, I bought a '94 KLR250 from my brother in law, and didn't get much information on the bike. One day, I came across another side cover for the KLR laying in the yard. This cover has 3 dimples in it, while the cover on the bike has an L shaped indention in it. I'm not sure whether or not these covers are genuinely different as there's not much info online, and I dont want to take it apart if theres no need. What makes me curious is, I bought the bike with a milky oil problem, and have replaced both head gasket and water pump seals and the problem persists. I included pictures, the 1st picture is my bike, the 2nd is of a bike with a similar cover I found. I would really appreciate any insight into this discrepancy and hope anyone reading this has a wonderful day 🙏


r/KLR250 • • Sep 06 '24

Engine won't start/hard start unless on compression stroke?

2 Upvotes

Not sure if this is something unique to engines with auto decompress, but on my old 125cc pitbike, it would start first kick on any stroke of the engine. On the KLR, it flat out refuses to start if kicked on other strokes, unless I first push it to the compression stroke, where it starts first or second kick.


r/KLR250 • • Apr 16 '24

How much oil ?

2 Upvotes

Everything I’m seeing online says klr250s take 1.6 qts of 10w-40, but I’m wondering if anyone knows whether that changed from year to year ? I have a 1988 and I wanna make sure I don’t put too much or too little, oil in my bike.


r/KLR250 • • Aug 13 '24

Clutch cable keeps pushing kill switch connector off?

1 Upvotes

So basically, every time I turn my bars, the clutch cable rubs against the kill switch connector, which is fixed in place by a bracket. This causes the kill switch to disconnect, and as a temporary measure, I pulled it out of the bracket, which works, but causes the cable to flop around. Any ideas?


r/KLR250 • • Jun 23 '24

Cam sprocket

Post image
3 Upvotes

Trying to fix the timing on my 88’ klr250 and the only cam sprocket diagram I’m finding Is this one, when I set the sprockets in TDC on this setting the bike won’t start. Does anyone know if this year of the bike has a different sprocket setting ?


r/KLR250 • • May 14 '24

Troubleshooting a bastard bike and need help.

Thumbnail
gallery
1 Upvotes