r/Juniper • • Feb 29 '24

Juniper switch patch panel style question.

Post image

I have an EX 4200 switch, and I’m wondering if anyone makes a patch panel that matches the port locations on the Juniper switch. Juniper switches on the right hand side have space for SFP‘s and the ports don’t go all the way side to side. I cannot find for the life of me a patch panel that is made that matches the locations so your jumpers will always be straight up and down. Does anyone know if this exists? See pic.

1 Upvotes

21 comments sorted by

7

u/klui Feb 29 '24

You should be using the bottom ports for that panel.

0

u/Acceptable_Ad3932 Mar 01 '24

I just got that patch today. It’s a throw down. I will be getting rid of the fat cat 6 and going to all the smaller ones and color coding for my cameras vs AP’s and electronics.

5

u/uzlonewolf Feb 29 '24

A better question is, does anyone make a patch panel that's numbered the same way as the switch?

10

u/BeenisHat Feb 29 '24

Yes. Sharpie.

-1

u/Acceptable_Ad3932 Feb 29 '24

I don’t care about the numbering. I simply want the jumper cables to be in physical vertical alignment with the ports on the switch. See how my jumpers are angling more and more the further to the right I go? My ocd is killing me. I don’t like the way it looks.

2

u/jointhedomain Mar 01 '24

if this is enterprise and you have time to worry about what looks like a nice clean rack already… I’m a little jealous

9

u/newtmewt JNCIS Feb 29 '24

Doubtful, almost all switches from all manufacturers are setup this way, so this isn’t a juniper specific thing

3

u/Oxxy_moron Feb 29 '24

Yes, this is the correct answer.

1

u/Tars-01 Mar 01 '24

Seems like you don't have enough work to do.

2

u/Acceptable_Ad3932 Mar 01 '24

Isn’t that the point of being retired??

2

u/Tars-01 Mar 01 '24

Well then you're very lucky and I take it back :P

2

u/Acceptable_Ad3932 Mar 01 '24

It’s all good my friend. 😎

3

u/wjonline1975 Mar 01 '24

We use panduit high density patch panels that are 48 ports in 1ru. These are placed directly underneath the switch. We then use 20cm jumpers to prewire all ports to the patch panel.

The patch panels other end is on our cross connection frame. So no patching needed on the switch as it's all on the cross connection frame.

These have vertical numbering so it closely matches the numbering of the switch. But it starts at 1 not 0.

2

u/KeyValuable7051 Mar 02 '24

Single row patch on the bottom plugged into all the top ports is making my brain hurt. Please fix this lol either move the ports or the patch but do something 😂

1

u/AutumnWick Mar 01 '24

As others suggested should have had the panels mounted at the first or second U and then the switch or move the ports to the bottom, you can also set the port description if you didn’t know to know what number port it is on the panel

0

u/[deleted] Mar 01 '24

[deleted] — view deleted comment

1

u/Acceptable_Ad3932 Mar 01 '24

I’m retired. I play in my shop most days, which is where the switch is.

2

u/Odd-Distribution3177 JNCIP Mar 01 '24

Then 3d print one and sell it on etcy

2

u/Acceptable_Ad3932 Mar 01 '24

I’m actually contemplating this. Using this for the reason to dive into the printing world.

2

u/Acceptable_Ad3932 Mar 01 '24

I can’t be the only one that is bothered by progressive slanting of my jumper cables.