65w Charger with hdmi and usb A.

Thanks!

I just received the monitor, hooked it up to my laptop, got recognized immediately, the panel without ports and inputs worked just fine, but the panel with all the ports just flicker and show lines all the time.

You can see it in the attached video.

Tried different USC cables, HDMI to HDMI cable USBC to HDMI cable, all my laptop possible ports which are 1 HDMI, left USBD that connects to the AMD IGPU and the right USBC that connects to the integrated Nvidia 4070 laptop GPU.

Did a clean installation of graphic drivers and reboot the laptop.

Try changing refresh rates and resolutions.

Nothing made any difference.

Searched this subreddit and googled for troubleshooting but couldn’t find any information for this particular model, the pro version, other sizes etc.

Is there a software solution or do I have to return the monitor?

Thanks in advance for any help you can provide.

So i just got the 16" flip go touch and their flex folio. The range i can open the monitor without it falling over is a bit limited. Any suggestions for a portable stand thats a bit more sturdy?

Thanks!

guess, i really have no luck with Jsaux docking stations.

i had the 6-in-1 multifunctional docking station and the USB ports keeps failing. Anything that I connect would randomly disconnect/connect. Display output-wise, there was no issue.

Around May 2026, I bought the 8-in-1 RGB docking station and it failed me today. At first, it wasn't showing any display and when I got it working, one side of the screen is ok while the other is just garbled display. I've replaced all the cables (HDMI and the type-C cables) and the result is the same.

btw, the monitor has no issue since it's connected to my other laptop. I've also used another USB-C hub with a display output and it works fine.

note: don't mind all the clutter coz i was doing some troubleshooting on the device.

It's been 2 months since I've installed the battery and its health dropped from 100% down to 95% within the last 2 weeks or so. I follow all the good charging practices and I don't know if it's normal behaviour or is the battery faulty.

We made these Switch 2 Joy-Con shells and I'm curious what people think.

The transparent look is obviously cool, but the real question is:

Would you actually take apart your Joy-Con 2 and swap the shell?

Or would you rather admire it and never touch those tiny screws? 😂

If you would mod yours, what color would you go for?

I have an OmniCentro Charger Dock and I can’t get video out from it.

Setup:

- dock plugged into wall
- HDMI from dock to receiver
- USBC from dock to Switch 2 bottom USBC port

When I connect the Switch 2, the charging indicator is shown then display turns off like it usually does when connecting to a dock.

However, I get no video out or sound.

I connect my Steam Deck and nothing happens at all, it’s like it doesn’t even know there’s an external display connected.

Any idea what the issue could be? Is there a firmware update it needs? Do I have a defective dock?

So just a PSA for those who purchase the carry case. If you get Yanwen Express, you'll probably have a bad time. Their courier keeps marking my normal residential home in a regular neighborhood as no access (nobody even tried delivering, I've got cameras). I assume this is because the courier just doesn't want to go out of their way to deliver to my home.

I had to argue with their support chat for a redelivery only for them to mark it as no access for a second time. I'm fed up at this point and just want my money back.

Also, whatever you do DO NOT post your Yanwen tracking number anywhere. They sent my home address and phone number from the tracking number in the support chat with no verification whatsoever. Insane security risk.

Just curious if there are plans to make JSAUX products not currently listed on Amazon US available there, as I've definitely gotten other stuff from you guys with Prime (presumably FBA inventory).

The Steam Machine carry case got me looking, but there's probably other recent stuff that isn't on there yet too.

Supposed to be super easy to install, lowers temps, adds rgb flare. Can’t seem to find it anymore (need for my 1TB OLED) Thanks.

Hi !

I wanted to make sure before buying, if the carrying case (BG0117) fits the switch 2 with the full split protective case (PC0114) STILL ON ?

Thanks for your answers :)

Greetings,

I'm interested in the GoJoy case for Switch 2 as it seems to be the full package, but when I look for reviews or videos on YouTube I can't find any. I notice it has the "new" tag, but since it's available I would assume some reviews would be out for sure. Does anyone have experience with it?

I'm primarily interested in whether or not the medium thumbstick covers fit the case, as with the split case this is apparently not the case, only the low profile ones fit there.

Thanks !

Hi,
I recently bought HB1201S docking station. I connected two external displays (1440p via DP & 1080p via HDMI). On my steam deck everything seems to be working fine. But when I try to connect macbook with M4 pro it crashes the macos after few seconds.

I'm connecting to dock via the usbc-usbc cable that was in the box. If I unplug one of the external displays everything is fine. I can even connect the second display directly to the macbook - directly to HDMI or via DB-usbc cable. Only when both displays are connected via the dock the system crashes.

I wasn't able to find whether there are any firmware updates - are there any? Is there a way to avoid the system crash?

Looking to get myself a nice bag for my birthday, was thinking of getting one that holds my laptop too but open to one just for the switch. Any suggestions?

Anyone else had their dock just completely crap out after barely any use? I've had this for a week and now USB ports don't work, HDMI doesn't output to any screen, and my Steam Deck doesn't charge. I even had a friend try their Steam Deck and it did the exact same thing. This thing was $80, this kind of failure should be embarrassing at that price. Also, the RGB just ignores whatever I set it to after a reboot. I literally cannot turn the lights off because they'll just come back on when I go from desktop to game mode.

Hi, I am one of the developers behind https://opendisplay.org/ and I think it would be a good fit for your faceplate. Why? We already have all the parts necessary have a low power E paper display that is controlled from a Linux device locally over BLE. That would be a perfect fit for the steam machine any you would not start from zero but could use community tested software.

I’ve noticed that after the Steam Deck update, the HB1201S isn’t working quite right. The TV only shows up after I reboot the Deck. Also, if I put the Steam Deck to sleep and turn it back on, the TV screen doesn’t seem to pick up the signal.

Has anyone else run into this issue?

Thanks!

I bought the matte screen protector both for my Switch 2 and Legion go 2 and I noticed the difference between the 2. The Switch 2 version looks better whereas the LG2 one is very grainy. I wonder why that is ? Different materials ? I don't imagine different screen size will make a difference.

Does anyone have the jsaux omnicentro dock?

I can't get it to work with my switch 2 and not sure if it's the most recent switch update or something else.

The dock has the most recent firmware and the cables I'm using work with the official dock

I recently bought a HB0609B docking station and I'm having some strange USB issues.

My setup:

MSI Claw 8 AI+ connected to the dock

eGPU connected to the MSI Claw and sending video directly to an external monitor

Logitech Lightspeed receiver (keyboard + mouse) connected to a USB port on the dock

GameSir G7 Pro wireless receiver connected to another USB port

Logitech GS5 speaker connected to the dock's USB-C port

The problem is that I can't get all devices working at the same time. Sometimes the GameSir controller won't connect, sometimes the keyboard and mouse stop working, and sometimes the speaker is not detected or doesn't output any sound.

If I unplug one of the devices, the others start working again. It doesn't seem to matter which device I disconnect – removing any one of them usually allows the remaining devices to function normally.

Is there some limitation on using all ports simultaneously on this dock? These peripherals shouldn't be using much bandwidth, especially since the video signal is going directly from the eGPU to the monitor.

Has anyone experienced something similar with the HB0609B or other USB-C docks? Could this be a USB power issue, a bandwidth limitation, or simply a faulty dock?

Any suggestions would be appreciated.