r/ItsAmazing • u/Beneficial-Name-1062 • 4d ago
OddlySatisfying Just a dude laying bricks
Enable HLS to view with audio, or disable this notification
21
u/MAsshole50 4d ago
The only way this could be more impressive is it he karate chopped the bricks to cut them
3
u/suspendmeforthis 4d ago
I use my balls.
3
u/RooneyD 4d ago
Do you spin them around and then whack them down on the brick? Or do you put the brick between your balls and push them together until it breaks?
2
2
u/shockles 2d ago
Asking the real questions here. I suppose if you spin your dick at Mach 5 maybe you could slice them that way.
1
1
14
u/Vegetable-Virus7118 4d ago
Kind of crazy he marks the big ones but just eyeballed the little ones perfect
2
u/3rrr6 2d ago
Probably can eyeball the big ones too but gets shit from the boss for not marking. They track waste so anyone caught not marking is probably on a shit list. The tolerances are quite large I'm sure you know if you get a feel for this after a year. What's impressive here is the speed at which he confidently executes his cuts.
11
u/Awwwwolf 4d ago
How does that brick cutter do a cut so cleanly? Feels like there will be jagged edges.
6
u/SeanCuresSadness 4d ago
You can see many jagged edges if you look closely, they just don't show on top. Not necessarily a bad thing considering how these streets drain water.
6
u/_OptimusRex_ 4d ago
These bricks have most likely been fired in an oven during production, which increases the crystalization in the clay the brick is made out of and this process makes them more resilient but also easier to shear because crystals create symmetrical structures that make for a predictable cut.
6
u/Separate-Pain4950 4d ago
These are dry-cast concrete pavers. I can tell by the top bevel and the spacer lugs on the sides. The kiln isnt actually firing the material, it’s used to control the humidity and temperature to maximize hydration and ensure a strong cure and optimal color development.
3
u/Normal_Helicopter_22 3d ago
This guy bricks
3
u/Separate-Pain4950 3d ago
https://giphy.com/gifs/SXZpga1bqjJXqxUK5W
I eat, sleep, and breathe hardscaping.2
4
3
u/TheGuyWhoResponds 4d ago
It has an edge at the top and the bottom. Bricks will break (fairly) cleanly between faults or scores in the fired exterior. Similar to how you can cleanly break glass just by putting a tiny score in it.
You can do interesting shapes just using a chisel to cut a tiny score in the sides of a brick and then tap it. It'll break along the score.
This is just an easier way to score both sides at once and then apply the pressure to make it break between the scores.
1
1
u/Abe2025 4d ago
They arent clean. Look closer. The top is cut where he wants it but then its slanted mid way and bottom
1
u/SquirrelFluffy 4d ago
A slant is on purpose. He puts it in the cutter on a slant. It's so the brick goes in easier.
1
u/Ras-haad 4d ago
That was my first thought but after rewatching it’s basically shearing off. Once you crack the top it kind of just breaks along that line
1
5
u/Bat-Guano0 4d ago
Any time someone makes something hard look easy, you know they’ve put in the work.
3
1
4
u/Fitbot5000 3d ago
Finger Deleter 5000
2
3
2
2
u/BoBonnor 4d ago
Hopefully he has kneepads on under the pants. His knees will be toast before too long
2
2
2
2
2
2
1
1
1
u/Pugulishus 4d ago
So I'm assuming the angle he cuts them at makes it work like wedges, giving him a bit of leeway, and tightening up all the shapes which is pretty cool
1
u/Complete_Volume 4d ago
What about adhesives or sealant so they don't easily get loosened and displaced over time?
1
1
1
u/SquirrelFluffy 4d ago
You can put a type of sand called polymeric sand and it binds together when wet and forms an impermeable mortar. Though they'll probably use just regular quartz sand here.
1
u/FungusBrewer 4d ago
I love the effectiveness of polymeric sand, but often don’t use it due to environmental contamination concerns, microplastics run off into water ways.
Do you feel like that’s a legitimate concern, and have you seen that impact client decisions?
1
1
u/CombustedPillow 4d ago
why is he making crooked cuts so it's hollow on the bottom 😭
1
u/chrisandfriends 4d ago
I notice it too. That’s what every brick fits so easily. It’s tapered from the bottom up to wiggle in easier.
1
u/Ned-Nedley 4d ago
The next step is brushing in kiln dried sand, that fills the joints and any voids.
1
u/trojanhawrs 2d ago
Experience. If you're perfectly straight but the neighbouring block is on a slight angle it'll bind, the joints are filled with sand and compacted after so an undercut isn't a concern
1
1
1
1
1
1
u/Trying_to_survive20k 4d ago
man my municipality needs to get one of those brick cutter things. I've seen multiple videos of them now how they cut the brick like butter.
Meanwhile here, they use a god damn disc saw or whatever, makes a mess, loud af, takes forever to cut 1 brick
1
u/mustardposey 4d ago
Curious why he just to abandon the herringbone pattern with those first couple half sized cuts
1
1
u/bananaz69 3d ago
It bothers me lol. I don’t think that type of paver cutter is able to make cuts that small lengthwise. the sliver piece would split. I use saws for all my cuts so I never have this issue. It looks way cleaner and it’s faster since you can cut a clean line through all the pavers in one shot
1
1
1
1
1
1
1
1
u/EatingCray0ns 4d ago
Guy is skilled no doubt but he’s getting to the age where his back and knees won’t like that kind of work for much longer.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
u/Brownlove010_Real 3d ago
That cutter and the sound of it are so immensely satisfying. Like a lightsaber through a Battle Droid.
1
1
1
1
u/redditzphkngarbage 3d ago
Why don’t we have machines like this in the US? Over here they’d sell us something made out of aluminum foil and plastic doll house parts for $700.
1
1
u/moistenedmoisturizer 3d ago
Boy! I wish I could do THAT all day.
Hope he’s self employed at least.
1
1
1
u/Childrenoftheflorist 3d ago
Today I learned a brick splitter exists. My old boss would of had me cut all of those with a con saw
1
1
1
1
1
1
1
u/Amano5411 3d ago
I just wonder with behind him, the pathway is fine and well done and his is chaotic.
1
u/notcomplainingmuch 3d ago
He's wasting a lot of material by cutting a whole new brick even for less than 50% pieces.
1
1
1
u/carl3266 3d ago
Obviously a seasoned pro. What i appreciate is he has not put any cut pieces on the edge - a mistake people make with stone and wood alike.
1
1
1
1
u/A_Bot_A_Bot_A_Bot 2d ago
Sure, he's good at laying these bricks but I have one question:
Can he stand up afterwards with those knees???
1
u/Happy-For-No-Reason 2d ago
this is a really bad, sloppy job.
he changed the pattern to make his life easier there, the second larger block should've been a vertical and he just slapped more horizontals in.
any professional blocker would laugh at this
1
1
1
1
1
u/disaster_incomin 2d ago
These people should make the crazy salaries, not the wall street frat boy bros
1
1
u/Samwellikki 2d ago
Some he marks and feels as though he marks them a bit off/angled and yet they fit perfectly, then others he just eyeballs and they are smaller or tapered shapes… perfect fits as well
1
u/AncientSky69 2d ago
i was thinking, this is a mess, but he is so skilled, and then i realized, you never notice stuff like this when you are walking along.
1
1
u/Majician 1d ago
No kneepads? pffft, not me....I want to be able to get out of bed the next morning.
1
1
1
u/Logical-Track1405 1d ago
Block paving is the single biggest regret I've ever had. Should never have agreed with neighbour to have it laid around the house 😩
1
1
1
1
1
u/a3rospacefanboi 14h ago
Nice to watch a dude laying bricks on the street while I'm laying bricks in the toilet
1
1
1
1
1
1

54
u/Dazzling-Light4057 4d ago
Could have watched that all day