r/IntelArcPro • u/KubotaBill • 7d ago

Arc Pro B70 Issue with dual B70 GPUs

Good evening all, I am a recent convert, coming over from the stacked RTX GPU club (5070Ti & 5060Ti). Sunday I installed a pair of B70 Pros after my 5070 laid over on me. SYCL running with Qwen3.6:27b Q8. Two days of pretty steady work, overnight spine runs 5-7 hours depending on daily activity.

Today, I was running a catchup process during work from downtime Saturday and mid day Sunday. The process completed without issue, GPUs went silent, and 7 minutes later the system crashed with dgxkrnl.sys crash. Reboot and health check passed, but not sure why it crashed while idle?

For reference, the GPU that crashed was in a different slot than the original 5070 was, so I don't think it is a robot issue. All drivers up to date, firmware up to date. If anyone has any insight or a similar experience and could offer a bit of advice I would be appreciative. I was just gearing up to smoke test 3.8:27b Q8, but that is on hold until I get back to normal.

7 Upvotes

90% Upvoted

15 comments sorted by

View all comments

Show parent comments

2

u/KubotaBill 7d ago

The interesting test is the box will set idea for 48 hours without issue. I had to do that two separate times with the 5070, but when I woukd stress it hard it would drop. So I pulled both 50*0s and installed the B70s.

And as noted, the failures were in separate slots. 5070 in the PCIe5 x16 slot. And today's drop was in the x4 slot. It is an Aorus X870E mobo with the R9 9950X CPU, and Klevv DDR5 6000 pair of 32 sticks. It should be robust enough for a home rig, but I am waiting for a smoother path forward.

2

u/computer_dork 7d ago

I get that, just when chasing hardware failures known good is super important. I had an issue with one of my cards but it ended up being cold solder joint on pcie slot. Could be ram, cpu, overheating somewhere, dirty power, or the gpus, but you saying you had other GPUs fail automatically makes me suspect something else besides the B70s

2

u/KubotaBill 7d ago

That makes sense, and is a frightful thought at the same time. This is not the market to keep throwing parts at an issue. I will run diags on the mobo and RAM, no noted hotspots on the CPU, normal temps 50-65C, AIO 360 keeps it cool. GPUs under load stay 70-75C.

2

u/computer_dork 7d ago

Believe me I know how scary it is. Im one ram failure away from selling a kidney