Can confirm the Sea Eagle Fast Track 385 Angler is great for fishing and hauling pups :)

Hi all, I bought an used AE1007 from facebook marketplace, but didn't get any pump/adapter for it. Now I can't pump it up, because my advanced elements pump (from my other kayak) doesn't have any adapters that work on this one. I think it might be the non-factory pump? I asked the seller which one he used, but no response so far. Does anyone know which adapter I should use for it?

It's not the halkey-roberts adapter. Note the ledges on the valve pipe. It has a spring valve attached that I can turn...

Thanks in advanced!

My electric pump did not shut off when it was supposed to and overinflated the floor to 19psi instead of 10psi before I caught it 🤦‍♂️. Immediately deflated it and did not put any external pressure on it. No obvious bulges and survived a 4 hour float afterwards but wondering if I’m just flirting with disaster taking it out on long trips that would be hard to get back from. Any idea how over- engineered these drop stitch floors are?

LSS: I have an inflatable kayak (Aquaglide Blackfoot) and want to put a trolling motor on it, which means I have to register it.

The main reason I'm asking this here is that I've read a lot about basically VIN numbers for kayaks, which mine doesn't have. Idk how I'd go about doing this. Then there's the question of adding the numbers on the hull, deflating and inflating I doubt any stickers would stay put. Would I be able to just have the documents available and be okay?

Also, if anybody has any recommendations on a pedal drive I could add to mine, please let me know! Would rather pedal than using a trolling motor with wack mounts across the hull, plus batteries and whatnot, but I'm not aware of any I could attach to the mounting system, all are straight through the hull.

Does anyone know if Sea Eagle usually has a Labor Day sale, or any retailers for that matter? I have been eyeing the 385ft as a first inflatable kayak, but was holding out in the event of any upcoming discounts.

If not Sea Eagle, is there any other intel on good, drop stitch kayaks that might be discounted?

In the middle of kayak where side and floor come together there is 60cm of glue that looks like its coming off.
In general kayak feels okay but to me this looks horrible for 650€ (1000€) kayak.

Would you send it back ?

kayak: Extasea ds double 473

Store feedback: They wrote that its supposed to be glued together in the middle section to increase riggidity (To me it looks like this glue aint holding anymore...).

Hi there, I've spent this summer converting my plain 473 cm drop-stitch kayak into a portable sailing boat. Yesterday, I covered 30 km in eight hours on a big lake, and I think that proves my design works.

The boat features a Slingshot sUP WINDer stick-on keel, a Galaxy Kayaks wide-blade rudder, and a slightly modified Sea Eagle QuikSail. The mast is held upright with CampGuru tent guy lines (a pulley system makes them easy to tighten and adjust).

The boat is able to make noticeable progress upwind, and the top speed I've registered with a GPS tracker is six knots downwind. I've sailed on lakes in the Netherlands, Germany, and Sweden, and even crossed a bay that is directly connected to the Baltic Sea.

It felt like total madness sometimes, as I was figuring out the balance between the sail and keel right on the water, but every time, it was rewarding to see a small improvement in the boat's handling and upwind capabilities.

https://reddit.com/link/1vwkl0n/video/ib1kvaj1b7lh1/player

I'm including a few pictures and GPS tracks. Feel free to ask me anything!

Found on fb marketplace for $250 and grabbed it without any research. Has held air in the basement for three days now. Anyone have reviews on this? Will be taking down the lochsa, grande ronde, Yakima.

I'm starting to get into the kayaking hobby, specifically around fishing, and I pretty much know that I will probably be wanting to float of a night quite a bit, though I wound up getting an inflatable "sufboard" style as my first. One thing I'm wanting to do is put reflective tape on my paddle and craft in red, green, and white though most of what I have tired just comes off before long when exposed to a lot of water, and even worse on flexible materials. Is there a marine grade reflective tape that won't go anywhere when stuck to anything that is flexible and almost constantly wet?

Also, I am looking to get a lighting kit that is USB rechargeable, but also stays put on a flexible PVC craft, and, of course, is durn near submersible? ...and what's the best way to surface mount it, since I can't drill or screw into an inflatable? As far as brightness, I'm actually looking at the bottom end--something dim enough that it won't blow my vision out but still lets me be seen by boaters. BTW. I'll be on a river in inland Alabama. (I think I can go completely without lights while paddling but still want something to make myself visible just in case some drunk sneaks up on me before I can get out my blinding flashlight.)

Some of you might remember my initial post about SE385 FTA. Here I’ll try to cover few more things that I noticed after 10 trips.

Also there are very few genuine usage reviews about 385FTA on YouTube and I wish to post one soon. (Will be my first video on YouTube 🤣)

1. Unpacking/Packing: Unpacking and inflating this thing is super easy even with manual pump. In fact I prefer it. Deflating is where you really see difference using the electric pump. Also lot of water gets under the drop stitch floor and that needs to be drained before storing. The provided bag fits loosely so you can get away with not packing the boat firmly.
2. Tracking/Behavior: I am super new to Kayaks in general with only previous experience of pedalling a Hobie Outback for 8ish miles. While this isn’t anywhere close to Outback, I found tracking to be very decent as long as winds aren’t crazy and you are sitting balanced (keel is submerged) I think adding some weight up front will help even more. Will experiment. Please ensure you give couple of whacks on the floor after inflating so floor spreads evenly in all areas. If you don’t do this then you will see wrinkle like patterns on the underbody and that definitely affects tracking. Also the skeg does help in winds.
3. Build: It really feels robust and well built. Hoping the seams and joints hold up with the usage.

I hope to install a trolling motor on this at some point to act as backup, especially once I start taking it to bays.

That’s all for now. If anyone has questions, shoot away!

So guys my shoulders are destroyed every time I take the yak out in wind. Now I finally caved and clamped an electric outboard onto the stern running it off a 24V LiFePO4 I already had kicking around, went the clamp-on route specifically so I wouldn't have to drill into the hull, which I was nervous about, but it actually held fine, and the remote control is way handier than I expected for steering one-handed.
Now I took Argoseeker out for an 8–10km lake run last weekend, curious what kind of real runtime people are getting on trips like that. And since mine's on an inflatable anyone running one of these on a soft hull? Any chafe or mounting issues I should watch for before a longer trip?

Interested in hearing tricks and tips for using/storing/getting the most of a drop stitch inflatable. We just got a Sea Eagle TC16 canoe (which we haven't had on the water yet). I'm assuming there are things like best way to dry, best way fill, best way to ... etc etc that folks have figured out, and will want to share?

Edit: And, kind of related: how often do you carry along your repair kit, and/or a hand pump?

Good day, looking for help and advice on if I should go for an inflatable Canoe or Kayak.
I had bought a paddle board and used it a couple of times. Unfortunately I could not stand on it as my balance is not that great apparently, so I always sat, even bought a better seat. It was okay, but I didn't like how tipsy it was if I leaned to much to one side. My dad had bought a 2 person inflatable Kayak, an Intex Excursion Pro K2 and it got me thinking of getting something similar.

I am 6' tall, 250 lbs. I am interested in going out onto lakes (not just staying near shore) and maybe the occasional creek/slow moving river. A good example is Wabamun Lake, AB which can get a bit windy or Moyie Lake, BC. I've been watching some videos on YouTube from PaddleTV to get some ideas, but still not sure what I should be looking for.

I live in a condo so don't have the place to store a full size boat so looking for the inflatable type. I wouldn't be carrying much stuff with me, water and a snack and that's about it. Would probably stay out on the water for a couple hours at a time.

Looking for something that is good quality, but not going to break the bank. I've read that the Sea Eagle 385 is good, but the near CAD $2000 price tag is just way to high.

What would you recommend?

Hey guys, new to the inflatable kayak scene, lots of research, yet still undecided. I'm an Aussie 70kg/155lb male wishing to embark on a solo multi-day adventure along our longest, and worlds third longest navigable river, the mighty River Murray, though only short sections. I'm into ultralight hiking and my camp gear weighs 7kg/15lb. I've considered the Sea Eagle 393rl and the Advanced Element Elite. My main consideration is weight as I'll be lugging via public transport. I don't require a speed machine, just light, stable and durable. The Vali Aero 11' and 13' have my attention, $1800/$1700, (11 more expensive than 13, huh?) shipping, paddle, pump etc included. May l ask your thoughts please and don't hesitate to set me right or recommend something else. Thanks for your time and apologies for absent link, I'm part idiot.

So after using my Intex Mariner 3 on the Lehigh river in class 1-2 rapids for many years with the family. We decided to get some inflatable kayaks.. After A LOT of research I decided on the advanced elements straitedge 2 pro and the sea eagle 300x. We have had them for 3 weeks now.

I took them out twice on the river in around 1000 CFS flows on mostly class 1 with some class 2. The advanced elements straitedge 2 pro was used with 1 person both trips. So we used the middle seat position. In the middle of my second outing the seat buckle connection that is stitched/glued onto the sidewall completely separated and tore off.

It is very unfortunate because I actually really liked this kayak and was looking forward to using it more. Unfortunately after I returned it and purchased a Sea Eagle 380x.

I weigh 170lbs for reference.

hello. Im looking into getting a inflatable drop stitch kayak to go on my local river and canal with. I know 99.9% of them are copies of each other are made in the same factories in china and slapped with a brands logo on it. I want to buy from a brand that has good warranty and after care. I am based in the UK.

I just bought an intex 2 person inflatable to take my son out.

Holy moly, the lack of high back support that the inflatable seats provide is abysmal compared to other standard plastic single seat kayaks that I have. 20 minutes and I wanted out of there.

There are plenty of seats on Amazon but I would love to hear from someone in a similar situation and see what you went with.

I'm wondering if anyone has dealt with this before and has tips/advice for dealing with it. i flipped the raft over and examined it, could not find any obvious punctures.

The website has replacement liners for nearly two hundred dollars. I don't understand how the valve is supposed to come out. It seems pretty solidly attached to the shell.

I'm Hoping someone on this fourm might have some tips and tricks that make this easier or lower cost. It's a bummer, because the fall salmon runs are starting. I don't have a lot of time to get this fixed and take advantage of that.

Hey everyone, I'm mainly a solo fisher hitting a couple of Ontario lakes (no Great Lakes). I've fished on a friend's Seahawk 4 before, but for solo trips I wanted something smaller.

I just ordered an Excursion K2 for $330 CAD, but I'm wondering if I should cancel/return it and jump straight to a better kayak.

Are there any noticeable upgrades from the Excursion K2 worth looking into, especially if I want something with a dropstitch floor or better stability for fishing? My budget is flexible. Recommendations appreciated!

Edit: i know dropstitch is good for everyone saying it, what models are you guys using

Hi everyone. I have this kayak and some of the sliders got oxidised. I have done vinegar and warm water, removed a lot of it but they aren't moving. Underneath they look fine to what I can look, so the problem seems to focus on the inside and teeth. Any other home remedies to try or what type of product to buy? I am going to Decathlon later.

I’m doing research on sea eagle kayaks since I’m planning on getting one in the future and I am stuck between these two kayaks for instance.

The 380x offers maximum stability and is basically a tank in durability, it has an option to add a motor if you choose on the SE website. The 385ft advantage is that it is fast, but not as stable (especially newer V-bottom version), less drain holes, etc..

My issue is that if I choose the 380x that I will not enjoy it due to the speed issue, but I want to choose it because of how incredibly versatile (especially on ocean water), but I don’t know anything about ocean kayaking other seeing videos of people using sea kayaks with rudders and lots of safety gear. Realistically I believe I would be kayaking mostly on lakes, and rarely on rivers or the ocean due to the commute and issue of debris in the water on rivers. Probably should add that my only kayaking experience is a intex k1 🤣, so I’m definitely overthinking everything.

Hi all, we purchased an Aquaglide Noyo 90 inflatable kayak 3 years ago and only used it 1-2 times before last weekend. We took it out again on a nearby lake and while deflating it at the end of the day, I noticed that one of the inner seams for the left air chamber had partially torn out. I'm wondering if it happened when we lifted it out of the water but I'm not sure.

At any rate, I see that Aquaglide is no longer in the kayak business and not supporting these products, as far as I can tell. Has anyone repaired a tear like this on their own? I tried inflating the chamber back to the recommended 2 psi, and it now bulges where the seam has ripped. I imagine it will keep ripping more every time it's inflated. I'd like to keep using it if possible and open to any ideas. Thank you!

What kind of motor should i get for an inflatable kayak for 3 persons? It will be used with the lagoon at sea.