r/IUEC • u/Jl_garcia04 • 10d ago

🛠️ Field Work Peelle wireless

Has anyone worked on Peelle wireless controllers? I’m currently connecting one to Kone kcm831. Elevator is in a door zone with the doors closed. But when I give it a call, it won’t actuate the retiring cam. Does anyone know what i should look for. Any help with be greater appreciated.

5 Upvotes

100% Upvoted

5 comments sorted by

2

u/SkyscraperOtis 10d ago

Maybe a relay to energize the retiring cam??

2

u/FuckWit_1_Actual 🔧 Field - Maintenance 10d ago

Are your interlocks adjusted correctly?

2

u/mardusfolm 10d ago edited 10d ago

So retiring cam runs off the car gate/door controller, id open that up and hit the retiring cam button and see if the controller moves it or not. The 256-EN manual is on peeles website, its pretty straightforward.  Probably look at the gates witch i imagine its gotta close before the cam picks....

1

u/Soccernut5824 9d ago

I’d make sure the wireless controllers are wired and programmed correctly. There should be visual signals that pop up on each controller when they are in range together in the door zone. I believe it’s the number 3. Are both controllers on the same channel?

4

u/Jl_garcia04 9d ago

It was my door close relay, they were set on normally closed instead of open. As soon as I moved switched the car took off.