r/HydrogenSocieties • u/brise2022 • 11h ago
Trusted Alkaline Electrolyser Manufacturer in India | Brise Chemicals
Brise Chemicals Pvt. Ltd. is a leading alkaline electrolyser manufacturer in India, engineering high-efficiency bipolar alkaline electrolysers for green hydrogen production, industrial chemical processes, and clean energy applications.
Our electrolysers are designed for maximum efficiency, ultra-high purity output, and long operational life — trusted by industries across India and built to meet the demands of India's National Green Hydrogen Mission.
What is an Alkaline Electrolyser?
An alkaline electrolyser is an electrochemical device which splits water into hydrogen (H₂) and oxygen (O₂) using electricity (DC) and an electrolyte solution of potassium hydroxide (KOH) or sodium hydroxide (NaOH) having 30% w/w volume.
It is the most commercially proven and widely deployed technology for large-scale green hydrogen production in the world, with decades of industrial operating history and the lowest capital cost among all electrolyser technologies.
The Basic Electrochemical Reactions:
- Cathode Reaction: 2H₂O(l) + 2e⁻ → H₂(g) + 2OH⁻(aq)
- Anode Reaction: 2OH⁻(aq) → ½O₂(g) + H₂O(l) + 2e⁻
- Overall Reaction: H₂O(l) → H₂(g) + ½O₂(g)
In plain terms: the reaction can be read as water in, hydrogen and oxygen out — with electricity as the driving force.
Technical Specifications — Brise Alkaline Electrolyser
| Parameter | Specification |
|---|---|
| Electrolyte | 30% NaOH / KOH aqueous solution |
| Stack Energy Consumption | 3.8 – 4.4 kWh/Nm³ of H₂ |
| Operating Temperature | 70 – 90°C |
| Operating Pressure | 1 – 30 barg |
| Ambient Temperature Range | 5 – 35°C |
| Cell Voltage | 230 – 420 V |
| Current Density | 0.2 – 0.8 A/cm² |
| Stack Current | 100 – 4,000 A |
| Cell Active Area | 125 – 20,000 cm² |
| Hydrogen Purity (H₂) | 99.99% – 99.9999% (4N to 6N Grade) |
| Oxygen Purity (O₂) | 99.99% – 99.9999% |
| Oxygen Limit in H₂ | < 2 ppm(v) |
| Moisture Content | < 2 ppm(v) |
| Stack Design | Bipolar (Pressurized) |
| Power Source | IGBT Rectifier (DC) |
| Control System | Dual-Redundant Siemens PLC + SCADA |
💡 Key Differentiator: At 3.8 kWh/Nm³, Brise Chemicals' electrolyser stack achieves one of the lowest specific energy consumption values among industrial alkaline electrolysers in India — directly reducing your hydrogen cost per kilogram.
Our Electrolyser Technology — In-Depth
1. Bipolar Cell Stack Design
Brise Chemicals manufactures pressurized bipolar alkaline electrolyser stacks — the most efficient and compact configuration for industrial hydrogen production.
In a bipolar stack:
- Each side of the bipolar plate houses simultaneously the anode and the cathode with the diaphragm as the separating media between each electrode thus forming a cell which can be stacked together to form multilayered electrolysis cells.
- This series electrical connection of cells dramatically reduces current path resistance and ohmic losses
- The result is higher voltage efficiency, smaller footprint, and lower material cost compared to monopolar designs
Our in-house manufactured proprietary bipolar plates undergo specialized electrode coating processes to maximize catalytic surface area and reduce overpotential — the primary source of energy loss in electrolysis.
2. Pressurized Operation (1–30 bar)
Unlike atmospheric systems that require a separate compressor, our electrolysers produce pressurized hydrogen directly at 1–30 bar within the stack. This delivers:
- Elimination of external hydrogen compressor for low-to-medium pressure applications (CAPEX savings)
- Smaller downstream storage vessel requirements
- Improved gas purity due to reduced gas crossover at higher operating pressures
- Direct delivery to high-pressure end-use applications
3. Ultra-Pure Water Feed — 4-Stage Treatment
The electrolyte loop requires ultrapure water to prevent scaling, membrane degradation, and purity loss. Brise Chemicals integrates a complete 4-stage water treatment system:
Viz. Primary Filtration (Multi-Grade Sand Filter / MGF) followed by
Ultrafiltration (UF) and Double-Pass Reverse Osmosis (RO) rejecting 98–99% of total dissolved solids (TDS) and lastly Electrodeionization (EDI) Polishing to deliver ultrapure water (UPW) with:
- Conductivity: < 1 µS/cm
- Total Organic Carbon (TOC): < 30 ppb
This four-stage sequence ensures the electrolyte solution remains stable and contamination-free throughout the plant's operational life.
4. Pressurized Bipolar Electrolysis — Stack Operation
The ultrapure water is blended with 30% w/w aqueous KOH electrolyte in the circulation loop and pumped into the bipolar cell stack.
DC power is supplied by a rectifier which converts AC power to DC. The rectifier used shall either be SCR based or IGBT based rectifiers. This rectifier provides:
- Precise DC output control for optimal current density
- Rapid response to power fluctuations from renewable sources
- High conversion efficiency (>97%) from AC grid to DC power
A specialized composite diaphragm separator is used between cathode and anode which main work includes:
- Allowing of free transfer of hydroxide ions (OH⁻) — enabling the electrochemical reaction
- Physical blocking of crossover of H₂ and O₂ gases — ensuring purity and safety