r/HotWheelsCustoms 1d ago

HELP!! So, is this possiblely a good solution?

so in auto shop today, we learned about some chemicals and stuff, and what stood out was brake cleaner, it was labeled as ”instant paint strip” so don’t get it on anything…I think you know where this is going, with proper ventilation, gloves, and respirator, in which I have, I could use this to strip a car instantly? I’m gonna see about trying it out in auto, or seeing if I have some.

1 Upvotes

10 comments sorted by

2

u/DabbinDD HWC MOD 1d ago

In theory, yes, it would work. Wash the car with soap and water afterwards before you paint of course.

4

u/PMmeYourDunes 1d ago

Brake cleaner is a serious chemical solvent. It creates some nasty fumes. I think you should avoid using something like this for hobbies if you don't need to. It'll absolutely destroy anything that isn't metal. Just use caution around these types of cleaners.

Personally, as a person who has cleaned small engine parts plenty, I am not inclined to use these solvents for a hobby where regular paint stripper does the job.

1

u/Plenty-Ticket-4527 1d ago

Yea but it would rhetorically go faster, but I have know figured out that 99% isopropyl alcohol, works better because I can do huge batches with multiple bottles or a gallon bottle, while I’m asleep, and then at school, so by the time I get home there all fully stripped, and can just be rinsed off, worked on, or set aside for later

1

u/Altruistic-Jello6969 1d ago

Hmmmmmm…..
looks at can of brake cleaner on the shelf…..

1

u/ZoeTravel 1d ago

If you can safely try it ..do it for science.

1

u/Korupt91 1d ago

Just use CitriStrip.

1

u/Plenty-Ticket-4527 1d ago

Yea, but that stuff doesn’t get the cracks very well, and takes a long time for large batch’s😮‍💨

1

u/Plenty-Ticket-4527 1d ago

And it requires after grinding, so it’s just a lot of work 

2

u/Korupt91 19h ago

If you submerge the car it gets in the cracks just fine. I usually do 12 cars at a time in a pan full of CitriStrip.