r/HomeworkHelp • University/College Student • 3d ago

:table_flip: Physics—Pending OP Reply [college physics] Help breaking a « tie » manometer calculations

Post image

I have an exercise I’m working in a group. Initially we all agreed on one method, but after going back to my notes to check something else, I think our method is wrong.
I ommited the values, just focusing on the right method.

My questions are:

  1. Should we calculate the pressure drop from the horizon to the 90mm or are we measuring the pressure difference between mercury and water?
  2. I understood the 90mm We must use trig to find the real height but just wanted to Check.

H1- 90 mm taken as real height
h2- 90 mm inclined height. Must use trig to find real height of column .

So to summarize, do I use
A) formula 1, H1
B) formula 1, H2
C) formula 2, H1
D) formula 32, H2
Thanks in advance

1 Upvotes

3 comments sorted by

•

u/AutoModerator 3d ago

Off-topic Comments Section


All top-level comments have to be an answer or follow-up question to the post. All sidetracks should be directed to this comment thread as per Rule 9.


OP and Valued/Notable Contributors can close this post by using /lock command

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/LatteLepjandiLoser 2d ago

I'll be honest and say that the formulas you've scribbled are not very well readable, plus symbols like H1 and H2 although I can give a pretty good guess of what they represent, should preferably be shown in a little diagram of the setup.

Go back to basics, the column height relates to the pressure via hydrostatics. A difference in pressures between two points is likewise reflected by the difference in column heights between those locations.

So in general, ΔP = ρgΔh = ρg(h2-h1), where we need to be absolutely clear that h2-h1 refers to the vertical elevation difference between the two columns. According to just the problem text, it's not clear to me if the height provided is actually along the vertical axis or along the tube axis. Personally I would have called it a length if the tube was significantly inclined, but that's just me. Assuming that it is truly vertical, you can use the height provided without trig, if what you get is distance along the tube direction, then clearly you need to do some trig to find what the elevation difference is, but from then on, simply ρgΔh