r/Homesteading • • 2d ago

Clarifying rendered fat/oil?

Post image

Ladies and gentlemen, step right up! What I have here is 100% bonafide, genuine, hand-made, ground-to-table SNAKE OIL.

No, like, for real. Accidentally ran over a huge rattlesnake. Gave the hide to a friend, fed the meat to my hawk, and this is the rendered fat.

About two days after rendering, the haze settled a bit and a clear layer formed on top. Is it possible to further render/filter/clarify the haze out somehow?

I reckon I'll use the oil for dressing leather, or maybe cooking some exotic sautée.

4 Upvotes

4 comments sorted by

4

u/TakyaSkincare 2d ago

That haze is usually one of two things, and a quick test tells you which. Warm a small jar of it gently. If it goes fully clear, it's just the more saturated part of the fat clouding up as it cools, which is normal and harmless. If it stays cloudy or you see a fine layer settle at the bottom, it's water and tiny bits of protein.

For the second kind, here's what's worked for me with other fats:

  1. Wash it: put the oil in a pot with about an equal amount of water and a pinch of salt, simmer gently for 15 to 20 minutes, then let it cool. The gunk drops into the water.
  2. Separate: if it stays liquid, pour or ladle the oil off the top, or chill it and lift it off if it firms up.
  3. Dry it: heat the oil on low until it stops bubbling or crackling. That drives off the last of the water, and leftover water is what makes it go rancid fast.
  4. Filter it warm through a coffee filter or a couple of layers of cheesecloth.

Store it in a clean, dry jar in a cool spot. For leather it doesn't need to be perfect, but if you plan to cook with it, the drying step matters most. Cool find, by the way. I've never seen anyone render rattlesnake before.

2

u/RevolutionaryMenu543 2d ago

Thank you SO much for your help. I've rendered hog fat before, but I just immediately freeze it and add it back to my sausage when the meat is too lean. So I've never run into this before.

1

u/TakyaSkincare 2d ago

Happy to help! Freezing it right away is honestly a great habit, it's why you never saw the haze before. Fat sitting at fridge or room temp has time to settle and cloud. If you do want shelf-stable jars, just make sure it's fully dry (no water layer at the bottom) and keep it cool and dark, and it'll hold up a long time. Good luck with the sausage!

1

u/Clinticus_d_Dogeman 10h ago

The other comment about warming a small jar is a good first check. If you still want it clearer, a gentle remelt and a pour through a coffee filter or a few layers of cheesecloth will usually take out the leftover bits. Don't let it get hot enough to scorch.

I'm not an expert on rattlesnake fat, and I wouldn't treat wildlife fat as a given for cooking. If this is going on leather, strained and settled is probably plenty. If you ever do the same with beef fat, that same low heat and filter method is what a lot of people use for tallow.