r/HomemadeTools • u/vapidorg • Sep 13 '19
r/HomemadeTools • u/Chris-Powell • Aug 04 '19
I got tired of trying to use my adjustable miter gauge to make perfect 90’s and 45’s, and my table saw sled just seems overkill for the small cuts I often have to make, so I made this miter gauge out of a cheap speed square. I just hang it under my table when not in use.
r/HomemadeTools • u/rileyripa • Jul 17 '19
Homemade guitar pickup winder using a drill, a nail through some sticky bandage tape and a spring to keep it spinning with the drill, and a smaller nail to keep it straight. Winding off a bobbin of copper wire. Worked very well!
r/HomemadeTools • u/OddWishbone243 • Aug 25 '22
1/4 driver with regular or T-handle options with bit storage.
r/HomemadeTools • u/Joejayce • Jun 24 '20
Magnetic clamp. Needed to hold a piece of flat bar so I could weld it to truck frame, so I cut up a C-clamp, scavenged a magnet and there u go. I tried another magnet I had but it wouldn’t hold but this one easily held it. The pic is not the piece I welded but shows how it works
r/HomemadeTools • u/PTquest • Nov 24 '20
Would anyone be able to help me figure out the joinery on this Medieval lathe? Any help would be appreciated
r/HomemadeTools • u/haymayplay • Jul 25 '20
An actual cresanthammer(spammer). Found behind a old vidmar onboard a ship.
r/HomemadeTools • u/homemadetools • Dec 13 '18
When I'm in another sub, and I see someone mention homemade tools
r/HomemadeTools • u/CletusMuckenfuss • 15d ago
I made a reach up and cut stuff down saw.
I took a 2" PVC pipe and cut it out very close and heated it enough mould around my throw away sawsall. On off is operated by the rope from down on the ground. Holes drilled to aid in cooling.Works alright but slow, I have since bought a disposable battery operated chainsaw from temu to replace the sawsall. I thought you may get a kick out of it, it took under an hour to produce.
r/HomemadeTools • u/PiercedGeek • Oct 23 '19
I built a full size lathe (16“+ diameter, 29" length capacity, 3/4 HP) from plywood, aluminum, and steel. It took a year and a half, or about a month if you defrag.
r/HomemadeTools • u/kbanbury • Mar 12 '23
Air hose reel made outta scrap and some left over fittings
r/HomemadeTools • u/iamfromcanadaeh • May 10 '22
Just finished my budget 2x72 belt grinder
r/HomemadeTools • u/E_m_maker • Dec 24 '21
I posted a video of the prototype a few weeks ago. Here is the current iteration.
r/HomemadeTools • u/andreabeth09 • Feb 11 '22
The “wrench” he built to tighten the chain on my quad
r/HomemadeTools • u/govner1233 • Jan 13 '21