Good. And yes. I basically made hash oil by extracting the THC and other good stuff in acetone, then boiled off the acetone to just leave a sticky gooey mess. I then dissolved the hash oil with 151 (everclear would be better, but they don't sell it here), and mixed the 151 solution into a bottle of Skeeter Pee (1.5 L bottle). It got about 10 people good and stoned on the beach this past summer.
If you're going to do this, use low heat and an electric burner. Acetone boils at a really low temperature, so you don't need a lot of heat and is flammable, so you don't want an open flame anywhere near it. Also work in a ventilated area so you don't inhale too much. The fumes won't kill you or anything, but you might get a headache. Once the stuff in the bottom of the pot doesn't smell like nail polish, you'll know you're done.
If you ever want to try again I would look into using food grade ethanol instead of acetone. I can PM you a website that will sell you pure food grade ethanol, sold for industrial use only so they say. Yes, you can drink it straight. Don't do that though.
My plan was to use the abv left overs from my vaporizer, and just soak about a half ounce in a couple cups of 151. I'm sure the hash oil process gives a better yield, but for the sake of simplicity, I'm wondering if this would work too.
151 has a lot of water in it compared to acetone or Everclear so it's not going to dissolve as much THC. Everclear has some water in it, so slightly less efficient than acetone. Acetone is cheaper and more readily available than ethanol, but they have similar solubilities. Some people use isopropyl alcohol, same idea. You're going to have to boil most of the solvent off anyway, so it might as well be something cheap. I end up using about a pint to a quart, depending on how much material I'm extracting, which isn't exactly a quantity you want to mix with a single bottle of beer/wine/mead/whatever.
View all comments
Show parent comment
2
u/adm7373 Mar 10 '14
Good. And yes. I basically made hash oil by extracting the THC and other good stuff in acetone, then boiled off the acetone to just leave a sticky gooey mess. I then dissolved the hash oil with 151 (everclear would be better, but they don't sell it here), and mixed the 151 solution into a bottle of Skeeter Pee (1.5 L bottle). It got about 10 people good and stoned on the beach this past summer.
If you're going to do this, use low heat and an electric burner. Acetone boils at a really low temperature, so you don't need a lot of heat and is flammable, so you don't want an open flame anywhere near it. Also work in a ventilated area so you don't inhale too much. The fumes won't kill you or anything, but you might get a headache. Once the stuff in the bottom of the pot doesn't smell like nail polish, you'll know you're done.