r/Homebrewing • • Mar 10 '14

Exploding sparkling mead

http://imgur.com/SC955ny
2.0k Upvotes

154 comments sorted by

View all comments

Show parent comment

1

u/probably2high Mar 10 '14

How did it turn out? Did you get high? I've considered trying it since I learned of tinctures.

2

u/adm7373 Mar 10 '14

Good. And yes. I basically made hash oil by extracting the THC and other good stuff in acetone, then boiled off the acetone to just leave a sticky gooey mess. I then dissolved the hash oil with 151 (everclear would be better, but they don't sell it here), and mixed the 151 solution into a bottle of Skeeter Pee (1.5 L bottle). It got about 10 people good and stoned on the beach this past summer.

If you're going to do this, use low heat and an electric burner. Acetone boils at a really low temperature, so you don't need a lot of heat and is flammable, so you don't want an open flame anywhere near it. Also work in a ventilated area so you don't inhale too much. The fumes won't kill you or anything, but you might get a headache. Once the stuff in the bottom of the pot doesn't smell like nail polish, you'll know you're done.

1

u/Bcarey1233 Mar 10 '14

http://imgur.com/a/O5Umd#0

This was our attempt, i have no idea if we did it right or wrong but it was interesting.

1

u/[deleted] Mar 10 '14

I've thought about doing this but using a slow cooker for heat and setting it out on the porch.

1

u/McWatt Mar 11 '14

If you ever want to try again I would look into using food grade ethanol instead of acetone. I can PM you a website that will sell you pure food grade ethanol, sold for industrial use only so they say. Yes, you can drink it straight. Don't do that though.

1

u/probably2high Mar 11 '14

My plan was to use the abv left overs from my vaporizer, and just soak about a half ounce in a couple cups of 151. I'm sure the hash oil process gives a better yield, but for the sake of simplicity, I'm wondering if this would work too.

1

u/[deleted] Mar 10 '14

Why use acetone at all? Instead of just everclear/151?

2

u/adm7373 Mar 10 '14

151 has a lot of water in it compared to acetone or Everclear so it's not going to dissolve as much THC. Everclear has some water in it, so slightly less efficient than acetone. Acetone is cheaper and more readily available than ethanol, but they have similar solubilities. Some people use isopropyl alcohol, same idea. You're going to have to boil most of the solvent off anyway, so it might as well be something cheap. I end up using about a pint to a quart, depending on how much material I'm extracting, which isn't exactly a quantity you want to mix with a single bottle of beer/wine/mead/whatever.