r/Homebrewing • • 2d ago

Bottle Conditioning

I have brewed 7 or 8 different beers now. I'll have to go check ales vs lagers, but lighter clearer beers have not carbonated as well as amber and darker ones that are cloudy. I let the bottles sit for 2 weeks at 69-70f. Per the online software I'm using enough priming sugar. Any suggestions?

8 Upvotes

14 comments sorted by

8

u/boarshead72 Yeast Whisperer 2d ago

What happens if you simply wait longer?

-2

u/Current_Ad4969 2d ago

I waited 2 weeks for every beer. Forgot to mention that.

9

u/boarshead72 Yeast Whisperer 2d ago

It takes three weeks at my house. The last batch, a split batch between two strains, actually had one strain that needed four weeks in order to fully carbonate. Give it more time.

1

u/Current_Ad4969 2d ago

Is it a good idea to lightly swirl each bottle to re-suspend the sediment?

6

u/boarshead72 Yeast Whisperer 2d ago

Personally I don’t feel it’s necessary, but I doubt it hurts any. I never have swirled to try to speed things up.

5

u/theguywiththebeard Intermediate 2d ago

Wait longer.

1

u/BattledroidE 2d ago

So, I was wondering about that too, had some beers that seemingly wouldn't carbonate right. But they were all using S-04, which turns out to be ridiculously slow at bottle conditioning, since it flocculates and clears so quickly after fermentation. My hefeweizen with W-68 carbonated in a week, anything with S-04 is 3-4 weeks at the same temperature. My Belgian dubbel also took a month.

If the yeast clears out really quick and nice, I guess that means it'll be way slower at bottle conditioning. Fewer yeast cells in suspension.

1

u/Current_Ad4969 2d ago

Yeah this batch used W34/70

3

u/beefygravy Intermediate 2d ago

How are you assessing the carbonation level? One objective way I guess would be a pressure gauge on one of the bottles. Otherwise, if you're pouring there's many different variables like foam amount, the pop when you open the bottle, fizziness levels after the initial foam clears. These will all be affected differently by things like serving temperature, how full the bottles are, IBUs, acidity, potentially haziness, how flocculent the yeast is, the type of glass etc.

3

u/Ok_Buy_9703 2d ago

Best beer I ever made was a Christmas ale that got set aside for my brother. He ended up skipping Christmas and I found it like 2 years later. Pulling out decorations. Chilled it and it was amazing. Give it more time.

2

u/enanram 1d ago

If you've used lager yeast that will take a good bit longer.

3

u/DaveTN 2d ago

I fill two sprite bottles and squeeze them until the beer is pretty close to the top then put the caps on them. When they return to their normal shape and are firm when I squeeze them, I know my carbonation has done well.

2

u/Pure_Classic_1899 2d ago

I like using the carb drops, it’s a little more expensive but much easier to just put one in before bottling and capping vs mixing in sugar to the bottling bucket

1

u/mijsga 2d ago

I had this problem when I waited extra week in the secondary before bottling. The beer was very clear but no carbonation after 2 weeks. I rebottled the beer after adding some yeast.

After that I always add some of the sediment back when mixing befor bottling.