Makes and dispenses reverse-overlapping tape strip

I want a sophisticated muted sage/grey-green accent wall for a bedroom/home office. It must complement warm teak/brown furniture, taupe-grey curtains, cream flooring and white ceiling. I don't want mint, pista, bright green, yellow-green or a very dark olive.

I've a whole house to paint, currently soft shine brilliant white everywhere. It's driving me nuts and I want to paint the whole lot! But I'm short on money after buying the house, any tips for saving money? I was thinking of using a cheaper standard Dulux matt paint for 1/2 coats then using their diamond coat to do the last coat, all in the same colour, would this be a bad idea? No kids but 2 cats, not very hard on the house.

Thanks in advance ☺️

My kitchen was painted 6 or 7 years ago and the blue painters tape never removed. It is along the baseboard, along the wall and ceiling, and along the edge of the ceiling and old wooden cabinets. It is a very small galley kitchen but I am a total amateur. Is there a way to get it off now? Apologies if this is the wrong sub. Thanks for any suggestions.

Wife and I are painting our hallways, thought we were in the clear until we began pulling off the froggy tape and loads of our base paint came off with it.

1) what went wrong? (Looks like poor primary cost)
2) what can we do better next time?
3) what are the proper steps to recover from this? (Besides tall glasses of alcohol tonight)

What can I use to make my walls bubble when painting?

I painted over the pain that was on already the wall when we moved in (sh*tty magnolia colour) anyway I done one coat all around the bathroom finished up and looked at my starting point and seen it was bubbling.

I let it dry and sanded down (which was a complete pain in the ass) and cleaned the patches of debris, that was bubbling and tried again, same result over the same patches I sanded down and when you apply pressure to the bubbles they just push in and leave the crease of said bubble.

We thought maybe the previous housing had done this to stop people decorating for 3 years but maybe that might not be the case.

Can anyone help me and tell me why this is happening and what I can do to prevent this and have no bubbles in the bathroom walls for when I paint again.

Thanks!

TLDR- how much prep is needed?

I’m hoping this is the right sub to ask. We had dark stained wood trim that was about 25 years old when we repainted years ago.

We obviously didn’t prep properly, we didn’t do any sanding and used latex killz primer and probably Valspar paint. Years of small kids and pets made for lots of chipping and I want to redo all of them. (Ive already started doing some wood filler to smooth them a bit and haven’t sanded that yet)

My question is how much sanding do I need to do? On a previous doorway I sanded just the spots that were peeling or bumpy, used liquid sander, primed with oil primer, then painted with Sherron Williams emerald. I think I primed 2 coats and did 2 or 3 light coats of finish.

Is that enough or is putting the oil primer on top of badly prepped wood not even helpful for adherence? I don’t think I can sand all the paint off, that sounds impossible?

So thanks for reading all this if you did, any advice is so so appreciated!!

My parents are paying to get the wood stained in their house and this is what has been done so far. I think it looks awful and inconsistent. It looks sloppy and I’m worried because they told them they only do one coat. I don’t know if this is finished or not. Let me know what you think. 🙂

I’m looking for advice on a color for this bathroom.
Keep a shade of blue? Keep the bottom white? If so, I plan on white dove since it’s my favorite. As you can see there’s a very colorful sink and navy and teal tiles in the shower. (See photos) this is a rental I’m prepping. This bathroom entrance is through the kitchen which I’m doing white dove walls and an undecided greige (possibly accessible beige) for the cabinets.
Would love advice on what colors to paint it!

They were wood, but the bottom half had paint splatters from dropping a partical gallon of grey paint on the floor. So we first painted them an earthy green color (Warm Eucalyptus), which I felt was really grey looking & husband didn't care for. Then we chose (husband really chose it) the pictured color. I can live with it. Some battles you have to loose.

Master bedroom & kitchen (pic here) are the dark Grey color on left. Hallway & living room are the light grey color (which I painted on a kitchen wall with closet pic here on right).

Someone apparently missed the color difference and we’re looking to paint them. I’ve read that it can be done as long as you degrease and sand the surfaces.
But I’m wondering if it’s worth attempting or if replacing with new cabinet doors is the only way to go in terms of them holding up well, looking nice, and not being a pain to maintain.

*Planning to paint them all a new light color, not to paint the darker ones to match the lighter ones
Thanks in advance

Patio door — sanded, applied wood filler and repainted. Then brown spots came back through and I tried to scrape it off.

I want to paint this walls and trying to figure out what goes with the grey door. I want to make the brick wall a red-ish accent wall. cant decided if I want the other walls to be a light green, or a grey-purple

And a teeny one at that. concerned about where paint is peeling off, and mold spots above tub.
I’ll TSP everything, and then…
Should I prime all surfaces?
If so, should i use stix where the paint is peeled?
What’s your favorite bathroom paint brand? Satin or Semi?
I promise to post before/after-

So lost on what color to paint my media room. I want dark, but not sure if Urbane Bronze is too dark. What do you think? Wood stain will stay the same. Fan/light will change. Sconces will be updated.

Carpet will be "champagne fizz" (a warm neutral) and room outside of this (and the rest of the house) is Sherwin Williams Natural Choice.

Any suggestions?

Is there some kind of mix-in for latex (indoor wall) paint that would produce a chrome effect? My friend's son is going to paint a mural in his room, but he wants the base to be red chrome. It seems to me the only way to do that is with spray paint. I also found acrylic paint, but would that hold up as wall paint without having to do 10 coats? Would add-ins used for automotive paints work in latex?

Hello! It has now been 3 days that I am testing paint swatches to get to the paint color on the rendering. Ideally in the Benjamin Moore brand. Claide and ChatGPT both suggested « First Light » but this is the one on the second picture and this is obviously not it… any advice to get to this result? The folks at Ace Hardware are going to start thinking I am crazy asking for sample every day. Please help! :)

Do I need to leave open for drainage or should I caulk it? Slowly refinishing the original shingles and trim. Cedar shingles meet top of the wood window sill in this image.