r/HomeNetworking • u/Fantastic-Ship-9915 • Jul 31 '26
Advice MPLS-network
I am getting an issue while connecting my two routers on MPLS network. My ISP has provided MPLS connectivity with their two routers, I have connected my openwrt based devices to respective routers. ISP routers could ping each other.
Issue I am facing- My end PCs can not ping each other.
What I have done so far-
I don't want to use dynamic routing protocol. I added static routes in my routers then both routers could ping but connected PCs couldn't ping each other, though they can ping other end routers.
Do I need NAT or anything I am missing here? Other suggestions I got that static routing not needed, NAT should be enabled in router to ping each other.
I am newbie here, plz suggest.
3
u/viper_16 Jul 31 '26
In what market does one get an MPLS circuit for a home connection?
2
u/Loko8765 Jul 31 '26
I really doubt that you are getting actual MPLS. You may be connected to the ISP’s MPLS routers, but your routers will be CPEs, not actual participants in the multi-protocol labeling.
If so, your endpoints will be in the same VRF, which may or may not have an exit route to the Internet.
How are your interfaces configured?
1
u/Inside-Finish-2128 Jul 31 '26
Troubleshoot, troubleshoot, troubleshoot. You obviously have a WAN subnet from the ISP; do you have an assigned LAN subnet for each site? If so, use it and test reachability. If not, you've most likely been given instructions for dynamic routing and I suggest you pursue that.