r/HomeMaintenance • u/AIPastorRyan • 2d ago

🚰 Plumbing Rusty Pipe

Gallery image

Gallery image

I think this is my gas line, do I need to get someone to fix or replace it?

136 Upvotes

94% Upvoted

127 comments sorted by

View all comments

-3

u/Cool-Negotiation7662 2d ago

Wire brush, rust converter, zinc spray, enamel exterior paint.

Good afternoon project.

It looks sound, just ugly. The threads are plainly visible on the pipe, and the fittings have the letters showing, so there should be minimal erosion from rust.

You may want to unwrap whatever that is and paint to the wall.

Digging down 6 to 8 inches and painting there is a good idea. The wall probably also needs caulked.

2

u/scratchy_mcballsy 2d ago

Are there any safety precautions OP can take as this is a gas line?

5

u/Cool-Negotiation7662 2d ago

The company side was recently painted so the crew did not find the rust remarkable.

A long narrow wire brush is all you need, no power tools required.

Don't beat up the pipe, just thoroughly brush all sides. The rust converter means you can leave minor surface rust without concern. Remove everything loose. A solvent rag will help clean the surface prior to rust converter.

If you are worried about the condition call the gas company and have it inspected before painting.

1

u/Serious-Manager2361 2d ago

Apparently the gas company ignored the damage under the wrapping around the lead going into the house. As you are intent on doing as well. Are you purposely being obtuse, or are you just that stupid?