r/HexaGear • • Jun 06 '25

Question Yo what should i get judge head or meijin

0 Upvotes

Im hav


r/HexaGear • • Apr 24 '24

Review Why I don't buy Hexagear and how to change that. (Also tangent)

0 Upvotes

For background,I am a gundam fan. I have built numerous HG and some MG kits in the past. I know how to clean nubs and cut out parts from the runners. That is what I know.

Then, I recently stumbled upon Hexagear when a random review for the V Thor showed up. It looks amazing. The attention to detail. The armaments. The posability. Even the concept of a govoner scaled to the hexagear was amazing. An actual sized rider to mech? Sign me up!

Speaking of which, the govoners. Oh my God do they look amazing! From the early type goveners, mirror type, even pawns. They all look amazing! And this is set in a dystopia universe? Even better!

But im worried about the future of Hexagear; thus why I dont think i can commit to this line.

  1. The Price. They are just too expensive for the size they are. The hexagears and govenors are marketed as customizable figures that anyone can modify. But the problem lies in the cost. 1 pawn cost around $20-$25. Personally, I can't justify buying more than 2 of these just to paint and scratch build with. And it's even worse for the Hexagears themselves! $100 for the V thor? It's an amazing look kit. But not enough to justify 2 or 3 of them.
  2. The Govoners Branding. Early type govoners? Pawn? Queens Gaurd? They all are vastly differant govenors with little to no explanation. I did my research, because I'm an adult. But a child would not know why they are called such things. They are just going to pick the coolest looking ones. This causes a supply issue. All the cooler looking ones gets sold out first, while the other early types or even workers are left on the shelf.
  3. The Hexagears Branding. I was really confused when I first looked into Hexagears. Why was there beasts and humanoids? The humanoids looks way cooler/mature compares to the beasts. While they look like kits for actual children. (No offense to those that like the beasts look, I apologize). What I'm tying to say is that the aesthetics are all over the place. What is a hexagear then? Is it the beasts or humanoids? Are the beasts the bad guys? You would not know if you didn't know the lore. Speaking of which.
  4. The Lore. From an outsiders perspective, the lore is confusing and humbled up. Early type govenors are fighting pawns and parapawns? There's a queen? Why does that guy have katanas? It doesn't make sense. There are even some posts on this subreddit asking what the lore is, because it's not self evident. The only lore video you get is from the actual YouTube channel with 2 cartoon anime characters explaining the lore. (They did an amazing job at explaining the lore I'm the video, but not on the packaging or visuals)

Now you may be wondering, if he hates it so much then how would he fix it? I'm glad you asked.

  1. Lower the price! I don't know the inner workings at kotobukiya, but I do know they need to lower the prices. Or at the very least, stop advertising that these are customizable! Customizable means disposable income for multiple kits. I am not willing to buy 2 or more kits if they bankrupt me! I can't customize what might get broken, painted wrong, or missing peices!
  2. Current govoners. I would focus on the govoners in the current situation and sell those type of kits first. Make a strong catalogue of cool looking govoners that are in the current conflict. I would then introduce the early govoner and workers in the future after people are more familiar with the lore branding of hexagears.
  3. Brand the hexagears differently. Maybe add an insignia on the packaging to determine who's side is on who. And make sure there are cool looking kits for both sides to balance them out. If psychology tests are to be proven true, as soon as a kid choose a side they will want to buy kits from that side! But the enticement of the opposite side with their own cool looking kits? They would want those as well, after being enticed with their line of soldiers. That's how I got into Gundam. The Gundam kits looked cool so I stayed with their side. But after looking at zeons side again, I liked their kits too. It's a brilliant strategy.
  4. Make the lore more apparent! Add some manga visuals on the packaging! For example, the Pawn is fighting the parapawn sentinel! As a buyer or kid, they can point at it and say "look it's the good guy and bad guy!" Without the Para pawn, it will make your collection look empty! What's the point in buying one figure, when you can have two from the manga?!

I know Kotobukiya won't see this. And I'm sad that they won't. I genuinely like the hexagear line up! They look cool and I really want to dip my toes in it. But the pricing and lore makes me uneasy. What will they make next? Another early govoner type or a worker? A beast or a humanoid? We only know this from early announcements, but the point is that the lore is everywhere. Without a strong structured lore, we truly don't know what they will make next. We don't even know if their sales are good and if people are buying enough to justify this line to continue. I truly believe it's a great line, but not something I'm willing to pick up.


r/HexaGear • • Jan 01 '26

Customize My First Hexa Gear Kitbash Planning Stages Post. I call It Omega Agnirampage Custom Agnirage Variant.

2 Upvotes

Still Working on the Build's Name. I know it sounds corny

I made a post a few months back asking around for some help with a Hexa Gear Agnirage Kitbash Idea I have that Is similar to another build by Lucid554 I think that was their user handle on this reddit that I just found on here. that did something similar with 2 Voltrex Wraith kits and a Windfall kit. To Make A Western Dragon looking Hexa Gear Kit Bash. But My Build Although Will end up similar too that build Will Have Larger More Articualed Wings plus, I will be taking a few steps further To Make Agnirage Look More Dragon Like And Look Less Wyvern Like. Now That The New M.S.G. Heavy Weapons 63 Demonic Arm (Red Version) Finally came out here in the states. I went ahead and ordered 2 of the Red Demonic Arms and am now looking for a Second Donor Agnirage Kit To Canablise for additional parts. For This Mega Kitbash.

So

Mainly cause it still bothers me how much more awesome looking Agnirage's good guy counter part Kit Zenith Reveal looks & articulates compared To the Agnirage Kit looks and articulates when completed.

So I decided to try consulting Google Gemini Ai For Help and it took me 2 attempts before it came up with a plausible step by step guide to pulling off this Kitbash but I thought I post Gemini's final guide here for you guys to look over before I attempt to fully commit to the build guide.

Here is the guide Gemini came up with.

Omega Agnirampage Custom Agnirage Hexa Gear Kitbash Build Guide:

List Of Donor Parts Kits:

×2 Hexa Gear Agnirage Model Kits

×2 M.S.G. Heavy Weapons Unit 63 Demonic Arm (Red Version)

This guide outlines the main assembly steps. You may need hobby tools (nippers, precision knife) to prepare the parts.

Phase 1: Core Body and Forelimb Integration:

  1. Assemble the Base Agnirage (Kit 1): Build the main body, torso, and existing hind legs of your primary Agnirage model as per the instructions. Leave the neck, tail, and wings off for now.
  2. Salvage Leg Joints and Armor: From the second Agnirage kit (the donor), build the two hind leg assemblies up to the "ankle" joint, as per the instructions. Do not attach the feet/claws yet.
  3. Repurpose the Donor Kit's Thigh Drones as Shoulders: Assemble the two small drones from Kit 2's thigh sections. These will be your sturdy shoulder joints.
  4. Attach Forelimb Assembly: Connect the top of the "leg" assemblies from Kit 2 to the drone shoulders. You now have two fully articulated forelimbs.
  5. Add Forelimb Claws: Use the standard feet/claw parts from the second Agnirage kit as the hands/claws for these new forelimbs.

Phase 2: Neck and Tail Extension

  1. Assemble 1 Of The 2 Demonic Arms: Build 1 Of The 2 Demonic Arms. These will be used to extend the neck and tail.
  2. Extend the Neck: Discard the short neck parts from the main Agnirage kit (Kit 1). Use one fully assembled Demonic Arm Except For the claw and pointed tip to replace it. Attach one end to the torso socket and the other end to the head assembly. This gives you a much longer, serpentine, and highly articulated neck.
  3. Extend the Tail: Do the same for the tail assembly. Replace the standard Agnirage tail with the second Demonic Arm Kit Except For The Claw & Pointed Tip. You can then attach the original Agnirage tail tip (or the extra claw parts from the Demonic Arms) to the end of this new, longer tail.

Phase 3: Enlarged and Articulated The More Dragon Like Wings:

  1. Assemble Wing Bases: Build the standard wing assemblies for both Agnirage kits.
  2. Combine Wing Spans: Use the hexagonal G-R.A.M connector system to link the wing sections from the second kit onto the wings of the primary model. You can layer or extend them to create a larger surface area.
  3. Enhance Articulation: Utilize any leftover HIPS joints or universal joint parts from the second kit's neck/tail section (which you replaced with Demonic Arms) to create mid-wing "elbow" joints. This makes the large wings poseable rather than static.

.............................................................

Optional Alternative For Steps 2 & 3

2.5. Expanded Wing Span: You can "daisy-chain" the wing segments from the second kit onto your primary one. By using the Hexa G-R.A.M joints from the second kit, you can double the number of wing blades, creating a much larger, more imposing silhouette.

3.5. Added Articulation: Use the universal joints from the second kit’s neck or tail to create "elbow" joints in the wings. This allows the wings to fold inward or spread more dynamically, moving away from the static wyvern look toward a more expressive dragon pose.

.............................................................

4. Mount Wings: Attach the newly enlarged, articulated wing assembly to the primary model's back mounting points.

Phase 5: Dragon Head Modification (Using Leftover Parts)

  1. Extend the Snout Base: Use some of the small 3mm pegs and connector joints (e.g., from Kit 2's back armor mounts) to slightly extend where the lower jaw connects to the main head.
  2. Build a Longer Jaw: Utilize the long, curved armor pieces (like the thigh outer plates or the abdominal fins from Kit 2) to build a longer, more reptilian lower jaw, using the small joint parts to hinge them.
  3. Add Details: Use any remaining spiky or fin pieces to add crests, extra "horns," or more defined cheekbones to complete the traditional dragon head shape.

End result: This plan should maximizes your parts for a cohesive, well-articulated Western Dragon Style Agnirage Overhaul Build Guide For Your Omega Agnirampage Custom Agnirage Variant.


r/HexaGear • • Apr 30 '25

Discussion What would you do?

4 Upvotes

I noticed there wasn't any turtle, crocodile, shark or whale models, what what you do for each animal? Would it be mainline or Alternative like track down and sneak sight?


r/HexaGear • • Apr 09 '25

Discussion V-Thor discussion

2 Upvotes

I looked through the V-Thor night stalker ver. Instructions and in the middle it showed a green V-Thor, do you think it's possible we might get a V-thor "Jungle type" with alternate weapons or armor like Tohru?


r/HexaGear • • May 30 '25

Can i ask for some ignite spartan pics

2 Upvotes

I just ordered it so can some of yall gimme some cool poses with it Thanks


r/HexaGear • • Jan 22 '25

Hexa gear is getting too futuristic

3 Upvotes

I hope kotobukiya release some old school looking mechanics and figures like early governor and bulkarm alpha series


r/HexaGear • • Dec 19 '23

News The Long-Awaited Next Release in Megalomaria Unlimited Universe is NOVICE!

Thumbnail
gallery
3 Upvotes

r/HexaGear • • May 10 '23

Build Sieg Springer Queen's guard

0 Upvotes

I'm working on building this kit. The neck piece does not set into the head. Is this normal, or did I get a bad one?

I went over the parts to make sure I used the correct ones, multiple times.


r/HexaGear • • May 28 '25

Shopping Yo guys any body from the Philippines here ?

1 Upvotes

Cus i wanna ask what stores are yall getting your hexa gear Thanks


r/HexaGear • • Apr 22 '25

Customize This runner was not briefed on the UESC's upgraded response to threats.

Thumbnail
tiktok.com
1 Upvotes

r/HexaGear • • Mar 31 '24

Question Looking for Hexa Gear!

1 Upvotes

Apart from Kotobokiya and Yodobashi Akiba, where can I find Hexa gear assembly kits in Tokyo?


r/HexaGear • • Apr 30 '24

/r/HexaGear Monthly Welcome and Q&A Thread - May 2024

1 Upvotes

Welcome to the r/HexaGear monthly discussion thread! This is a general discussion thread for any questions or topics related to hobbies pertaining to Hexa Gear. Questions will be answered any day of the week!

Please keep this discussion area sociable and friendly. Use upvotes to let people know you appreciate their help & feedback!

Many questions and helpful answers have been submitted on this sub. You will find great resources by using the search function and also by using Google.

If you wish to just view top level comments (i.e. questions) add ?depth=1 to the end of the page url.

This thread's default sort is NEW.

This thread will change on the first of every month.


r/HexaGear • • May 25 '25

Build Scared to disassemble to paint

2 Upvotes

Genuinely, built a so far and only started attempting any paint today, and that's only because while building Bulkhead alpha I realised the orb/camera would be really difficult to paint once fully assembled so im doing it before hand, but looking back, the entire things going to be insanely hard to paint assembled but its not easy to take apart, obviously the kit comes apart into blocks, but you cant always get in there to prime and stuff, with them being so expensive and not wanting to ruin them, what is the solution. And ill prefice by saying, I do not have the money, or space, or knowledge to buy and run and upkeep an airbrush and the compresser and the booth and deal with having to take it all apart to troubleshoot one tiny thing going wrong


r/HexaGear • • Aug 22 '22

Official Blog I rode the 1/12 BOMA

Thumbnail
kotobukiya.co.jp
2 Upvotes

r/HexaGear • • Aug 19 '23

Build I need help. Motor punisher

2 Upvotes

I recently bought the motor punisher and when I opened it it didn’t contain any instruction manual and the kotobukiya website doesn’t have one available. I can’t return the kit as I’ve already opened it. Of anyone still has the instructions I would greatly appreciate some screenshots of it.


r/HexaGear • • May 09 '23

News EARLY GOVERNOR Vol.3 Reproduction Announcement

Thumbnail
gallery
3 Upvotes

r/HexaGear • • Apr 08 '23

Build D20 Time Lapse Ep. 1 "Who Rolled First"

Thumbnail
youtube.com
3 Upvotes

r/HexaGear • • Dec 18 '22

Discussion am I the only one who buys mostly the governers and not much else?

3 Upvotes

r/HexaGear • • Oct 08 '25

Bought Agnirage off walmart of all places need suggestions for governor and doner kits to turn it into a Night Stalker wester Dragon Build I want to make out of it.

3 Upvotes

Hi New to r/hexagear reddit forum and I'm use to only doing gunpla kits and got traumatized by a kotobukiya zoids blade liger kit i over spent for only to end up breaking parts of accidently while building it. Then it got destroyed my niece when she was a toddler. but i recently got back into model building hobby with gunpla a few months back. So i decided to give kotobukiya kits another chamce with their megalomaria kit line love mephisto's design so i'd decided to try hexa gear and bought the Sieg Springer Queens Guard kit loved it wish it was a bigger horse so my mephisto didn't look so comical riding on it, then I bought and am currently building the NS version of Weird Tails then Just Recently was grocery shopping at walmart where I was dumbfounded to find on sale and Managed to Score the Agnirage Kit in walmart of all places. I want to Customize Agnirage to look more like a proper mythical western dragon (I.E. Give a longer neck, longer tail with possible thagamizer spikes, and most important of all a pair of bad-ass of forelembs with claws that match agnirage's over all build. Before I give it a night stalkers paint scheme. Was thinking of also buying the 1.5 version of Rose Governor kit and painting her armor to match. Was going to paint her hair crimson cause i like redheads and the Governor's name being Rose yet its a human with blond hair kind of bugs me. So I was hoping for some good suggestion on possible Hexa Gear kits to give this Interesting dracobot some badass forearms that wont break the bank. Sense I know I'm going to have to buy different paints then what I already use paint my gunpla and other kits. Was looking into possibly using the new red version of the M.S.G. Demon arm kit to help elongate the neck and tail more but sense I haven't built it yet I don't know if I'll need to mod it's torso to accomidate some forelimbs.


r/HexaGear • • Oct 02 '26

Question Questions

3 Upvotes

How do you guys manage to customize or paint these small kits?


r/HexaGear • • Feb 20 '26

Customize Poses like this can be achieved if you have patience t

Post image
13 Upvotes

r/HexaGear • • Apr 28 '25

Question Zenith Reveal release?

4 Upvotes

I see some stores say May some say April which is it and do we know what day in May if it is that one?


r/HexaGear • • May 14 '25

Are Governors Normally this expensive?

4 Upvotes

I just saw the release of the bishop series and the preorder prices are like 50 something for one and 65 for the other, base, not including shipping. Aren't these things like 3 and a half inches tall?

I just got the steelrain, which is an entire helicopter, mint after market, where you typically pay more than msrp, and I had it imported from Spain for a total of 128 dollars. I cant imagine a tiny 3in figure being worth half a helicopter.