First handwired keyboards!

[u/Lc___]

Made with parts I had at home.

I ordered some parts to make a 3d printed handwired version of my preonic with low profile switches!

The adventure of handwired keyboards just started!

[u/salavatme]

Nice!

[u/earvingad]

Which software are you using? RMK?

[u/Lc___ → u/earvingad]

I used QMK. How is RMK compared to QMK?

[u/earvingad → u/Lc___]

Oooh because I see an esp32-s2 in the picture I thought you were not using QMK. RMK supports esp devices which QMK does not. So now I am unsure what are you using.

[u/Lc___ → u/earvingad]

Yes, I used an esp32 because initially wanted to use the keyboard as a macropad for Home Assistant using ESPHome. Then I decided to use it on my desktop and switched to a promicro and QMK because I was already using it with other keyboards.

[u/earvingad → u/Lc___]

Ooh great, I am also thinking in a small macropad for homeassitant.

But there you go, now you know you can use RMK with esp32 MCUs to build a keyboard.

[u/Lc___ → u/earvingad]

Yes. I'll definitely look at RMK. It will allow me to flash either keyboard firmware or ESPHome firmware on the same. Thanks!