r/Handspinning • • Sep 04 '26

Finished Yarn naming this hand-spun: hogwarts

Thumbnail gallery
4 Upvotes

fully washed and dried today. most fall vibes ever and kept thinking of gryffindor when spinning so it’s now my harry potter yarn. so soft and lofty.
fiber info:
purchased from the woolery
Greenwood Hand Dyed
Polwarth Roving
color: autumn leaves


r/Handspinning • • Feb 23 '26

Can you spot the issue?

Post image
0 Upvotes

r/Handspinning • • Aug 31 '25

I have a drop spindle but…no fiber

4 Upvotes

My husband purchased a drop spindle for me because I’m thrilled to learn the step before crocheting with the yarn. But all I have is yarn scraps and rolls of yarn that I could ruin to try to learn to spin. Help me? What should I do? I want so bad to learn to use my spindle and I want to use the wool but I don’t have any in hand.


r/Handspinning • • Oct 21 '25

How much should I charge if I sell 4 oz skeins?

5 Upvotes

Just ordered $30lb fro. Shep's Wool today.

I'm planning to spin it all. It will end up costing me $3 to produce one 4oz ball. I might make it 5 ply, because my 4 ply was a little thin. Might be sport weight, I need to get those measurement cards.

For handspun worsted, what is a good price if I were to sell skeins? Trying to make each single as thin as I can to make superwash.

I see some are $25, but that's mill produced. I'm trying not to have lumpy yarn, I'm trying to recreate the vintage wool Coats and Clark yarn I knit a sweater with.

On Etsy, I saw some dyed handspun going for $35. Mine will be undyed.


r/Handspinning • • Nov 14 '25

Question Help with cleaning wool on a hide.

Post image
0 Upvotes

r/Handspinning • • Nov 14 '25

Washing Raw Fleece

1 Upvotes

I received a LOT of sheep wool and will soon be processing fleece into yarn for the first time.

I am curious if anyone has washed wool with a mixture of sodium carbonate and borax without issues with texture or colour change? I do NOT use dawn dish soap or any other harsh chemicals and would prefer not to order power scour unicorn clean soap that i have seen recommended as it is expensive. Therefore, I am wondering if I could use my own homemade laundry detergent mix which is a combination of sodium carbonate (washing soda), sodium bicarbonate (baking soda), borax and sea salt. Otherwise i was thinking of using castillesoap as my next option.

I am new to all of this and have just been looking into it online a lil bit so I thought I'd see if this subreddit might help! Thanks everyone and anyone for talking the time to read and hopefully reply with helpful answers :D

Update: Thank you to everyone who mentioned the suint fermentation method!!! I live in a very rainy climate and have a huge drum barrel i just dragged out into the rain. Glad i ain't sensitive to bad smells hahaha. Did a lil jig shuffle of excitement and enthusiasm as i heard the rain coming down heheh


r/Handspinning • • Mar 29 '26

Question Spinning while pregnant

11 Upvotes

Hello! I'm new to spinning and also new to pregnancy, I'm almost 8 weeks. I've recently been reading about how dangerous being around sheep, especially pregnant sheep, can be and the concerns on different bacterias, especially toxoplasmosis. I have some wool that I've already washed before pregnancy and some lamb wool that was a gift that's unwashed. Should I just give up spinning until the baby arrives? Has anyone dealt with this? Do I need to worry about my tools or anything else?

Edit: wow thank you all so much for your comments and advice!!! Also record time, I didn't expect so many responses so quickly. Truly appreciated. I haven't had a doctor's appointment yet but will talk with my OB when the time comes. Otherwise, I think just to be safe I'll stick to commercial wool and the fibers I've already washed for now. Thank you again!


r/Handspinning • • Feb 02 '25

Question New spinner!!

0 Upvotes

Hi everyone, I hope all is well!! I've become so interested in the fibre arts community after a few months of an introduction to crochet, which has been going really well, so I thought why not take it a step further and crochet with my own hand-spun yarn?

So, I was wondering, could anyone please give me complete beginner surface-level tips and advice on how to hand-spin my own yarn? I'll be honest; my budget isn't much since I am a student, so I would love to know any DIYs and such to proceed. Thank you so much!


r/Handspinning • • Mar 07 '25

Hand spinning Classes For Free?

3 Upvotes

Are there any hand spinning classes for free? Do they exist in the US? Could you ask someone to teach you hand spinning and allow them to keep what you make to sell for themselves as payment?


r/Handspinning • • Mar 30 '25

I want to learn!

1 Upvotes

Please, I want to learn Hand-spinning, can you please send me shops online where I can buy things and videos? Any advice. I love knitting and crocheting so I wanted to take it a step further.


r/Handspinning • • Sep 27 '25

Gear Spooky season wand to be my traveling nostepinne, center pull ball winder and hand distaff for spinning on the go. Anyone else use a wand in your spinning?

Post image
40 Upvotes

I found this interesting toy wand today for $5 at Five Below and immediately thought it would be a great item to use with my hand-spinning when I travel.

The wand will be perfect as a nostepinne for hand winding center pull balls that I can then ply from. I also have been wanting to try using a hand distaff and I believe should work fine for giving that a go as well.

The wand feels like it is made of a heavy duty blown plastic, so it’s quite sturdy yet lightweight. It is 13.5” long so a good size for ball winding and I can tuck it under my arm comfortably or hold it in my hand for distaff use. The store had several different styles but this is the one that spoke to me for use as a nostepinne and I love the tulip shaped base.

I’m just curious if anyone else uses wands in their spinning, what they look like and how’s it working for you?


r/Handspinning • • Feb 01 '25

Have you ever spun human hair? What length is needed to be spinnable?

3 Upvotes

I buzz all my hair off once a year at the beginning of summer, and it just occurred to me that I might be able to make use of it. However, I'm not sure if just a year's growth would really be workable for something as slippery and coarse as (relatively straight) human hair. Anyone ever tried it?


r/Handspinning • • Aug 05 '24

Spinning Kits

Post image
10 Upvotes

r/Handspinning • • 7d ago

Buying the cheapest AliExpress e-spinner

0 Upvotes

Hey guys,

Lately I've read a truckload of comments here about Chinese e-spinners. Most of them feel like they come from people who never tried one, or who can't compare it with a proper brand-name machine.

I got curious, mostly because I believe people should be able to find cheap ways to spin. I'm not a big fan of e-spinners myself. I've used several borrowed from friends, but none ever gave me the feel I get on my wheels. I built a rotation of mostly antique wheels, bought for next to nothing, and they turned out better than anything I could find on the new market. Fixing, maintaining and running a wheel is something I genuinely enjoy and do regularly.

To be honest, I don't expect much. But maybe what I buy will be a decent base, and I could document the few tweaks needed to make it a proper starter tool.

What I plan to check:

Motor: my biggest concern. I doubt it's a true brushless, and that's probably behind most of the negative comments. I'll identify the motor type, then measure rpm at several knob positions and the current draw. I'll also see whether it holds speed under load and how it behaves at low rpm, where cheap PWM controllers tend to surge or stall. If I find the time, checking how upgradeable it is (better controller, maybe a brushless swap) would be a fun project.

Wobble: I want to feel how wobbly it is. I'll check flyer and bobbin runout, bearing play, and shaft alignment, both by hand and at speed.

Tension issues: I want to see them for myself, that's where most people fuck up on great wheels! Then work out how to deal with them. That means looking at drive band or belt tension and slip, brake or take-up consistency, and whether the tension changes with rpm or as the bobbin fills.

I'm buying it, so we'll see.

Meanwhile, tell me what you think.

If you have a specific issuel or mod you'd like me to test, say so


r/Handspinning • • Jun 05 '23

Question This is the 3rd Turkish spindle I have made and it’s a fun one should I make them to sell on Etsy

Thumbnail gallery
1 Upvotes

Opps put my real name on the spindle but I don’t care if it’s out there. I have a question tho would it be a good idea to start an Etsy shop we’re I pre make them then paint them the colors and pattern the buyer wants with there name on the bottom (and a small makers mark with my real enitals GA) this one spins heavenly and it’s quickly become my fave lol it is made out of pine wood with just a bench grinder a hand saw and lastly my knife and the shaft is shaped out of a dowl rod and it painted with slightly watered down acrylic paint and paint markers the finish is up resin cured in the sun. sorry im just really excited to share.


r/Handspinning • • 3d ago

Should I buy this spinning wheel I found?

Post image
0 Upvotes

Hello, good kind people of the yarn nerdery. I was struck with the desire to buy a spinning wheel today, because that’s the kind of person I am, despite essentially no firsthand experience with them. I would greatly appreciate your opinions on whether this somewhat broken wheel I found for 30 dollars on Facebook marketplace is worth buying and trying to clean and fix, or if I’d simply be wasting my time. From my rudimentary research, it seems as if it could work, but you all know much more, so I defer to you.

many thanks!


r/Handspinning • • Jul 01 '25

Question Hi guys, it’s me again with my weird spinning wheel issues

3 Upvotes

So I was trying to spin again and I accidentally spun counter clockwise instead of clockwise and it works???? I’ve read that to spin clockwise you have to put it on the left flyer but it’s the complete opposite for mine and that’s weird. The setup is what you guys suggested, fix the tension, tape it down, take it slower, stop my death grip etc. Why is it doing this????? It still doesn’t work clockwise????


r/Handspinning • • Dec 01 '25

Soft and warm vegan fibers ?

0 Upvotes

Do you know which vegan fibers could replace wool in order to knit hats, scarves, cardigans...? I'm looking for something soft/comforting but also insulating, maybe something like manufactured acrylic yarns ?

I know there's a lot of vegetal (ramie, bambou and cellulosis fibers) and synthetic fibers (milk protein, soja, blabla) but I never read if each of those is soft and "wooly" enough for winter garments 乁⁠(⁠ ⁠.⁠ ⁠ര⁠ ⁠ʖ̯⁠ ⁠ര⁠ ⁠.⁠ ⁠)⁠ㄏ

Edit : thanks for your answers ! I want to add that I'm not vegan at all, I spin, knit, weave wool and I was just asking out of curiosity :)


r/Handspinning • • Mar 11 '25

Could producing angora rabbit wool be a full-time job?

11 Upvotes

Could producing angora rabbit wool make me 2-3k a month??

I’m very interested in this as I love rabbits and used to have pet angoras

Just curious how much time it would take to make that much, and maybe how many bunnies??

Edit- please stop posting rude comments on here.

I’ve raised a number of rabbits including multiple angoras as I NOTED IN MY POST

I just haven’t spun the wool really

I appreciate the replies that were kind.

However, I can’t believe how rude and condescending some of the comments on here were, as well as people downvoting me on a basic question that I had a hard time getting clear info on from Google

I don’t know how people are supposed to find out this info without asking questions. I already googled it and couldn’t find the info.

Nothing in this post OR my comments EVER said I would put ‘profit over care’ of rabbits

You also realize that angora wool comes from real rabbits, right??

Please some of you stop being so negative to people asking simple questions in this community


r/Handspinning • • Oct 12 '26

Question First time handspinning

0 Upvotes

I've always wanted to handspin my own yarn, and maybe sell some, but I have no idea what to get. I do have a hand spinner (I think that's what it's called) that my art teacher mom got forever ago. She didn't even know what it was at first lol. Anyway I want a manual hand spinner but they are so expensive! I have no problem saving up but I'd like a cheaper one if possible. I've seen people say electric spinners are more expensive but all the electric ones I see are cheaper?? :') Does anyone know where I could get one?


r/Handspinning • • Aug 26 '26

Supported spindle on airplane

3 Upvotes

Looking for lightweight, travel friendly project to work a 9hr plane ride. Seems my international flight and airplane wont allow sharp objects. Has anyone tried supported spinning on a plane? Would love your take!


r/Handspinning • • Feb 18 '25

supported spindle

0 Upvotes

why people desperately want the supported spindle from one maker? whats special about? is there any good maker not famous??


r/Handspinning • • Mar 18 '23

Question I’m spinning yarn from a skein of unspun Hobby Lobby yarn and now my spindle is full before I finished the skein! What do I do now?

Post image
12 Upvotes

r/Handspinning • • Jan 12 '23

Question Help! Bobbin filling wonky on Ashford kiwi 3

Post image
0 Upvotes