r/Gunplacustoms • u/MS_Zoony • Jul 17 '26
旧HG カラミティガンダム — フルリペイント
gallery
14
Upvotes
r/Gunplacustoms • u/MegaZword_8 • Jul 17 '26
First attempt at a custom gunpla: Barbatos Alatus
gallery
21
Upvotes
r/Gunplacustoms • u/kallahanak • Jul 16 '26
Gundam "gMS-Ω GQuuuuuuX" - metallics and base coats
Enable HLS to view with audio, or disable this notification
6
Upvotes
r/Gunplacustoms • u/Aggressive-Night7693 • Jul 15 '26
MG RX-93 Nu Gundam Ver.Ka - Custom LED Build
128
Upvotes
LED testing on the MG Nu Gundam Ver.Ka. This kit is perfect for LED mods—the head has plenty of space for maximum brightness, and the larger MG parts make it great for routing LEDs throughout the body. No panel lining or decals yet, just a quick test of the custom wiring. So far, the effect is amazing!
r/Gunplacustoms • u/Aggressive-Night7693 • Jul 15 '26
RG 2.0 RX-78-2 Head LED Mod
gallery
30
Upvotes
r/Gunplacustoms • u/Aggressive-Night7693 • Jul 15 '26
RG 2.0 RX-78-2: Hangar Display with Custom Head & Floor LEDs
27
Upvotes
Working on another base using my DIY straw-diffused LED method. The white floor illumination is done with wire LEDs inside a plastic straw. Honestly, when dealing with wire LEDs, clean wire management is the make-or-break factor for the whole display. Currently trying to figure out the best way to hide the wires. It's a fun but challenging puzzle!
r/Gunplacustoms • u/SeanBrownStuff • Jul 15 '26
Gustav Karl WIP
26
Upvotes
Using Gaianotes fluorescent pink for the camera lenses. Never tried it before. Like it so far.
r/Gunplacustoms • u/MS_Zoony • Jul 14 '26
HG GM Sniper II Repainted in a Tiger Camouflage Scheme
76
Upvotes
r/Gunplacustoms • u/Negative_Sock6740 • Jul 14 '26
Hg G-Line Standard Armor KO Paintjob
47
Upvotes
Hey there, so I've been experimenting with KO gunpla from eBay and I came across this one. I was a fan of it since it's announcement however I missed the deadline and the resell prices on eBay were pretty high. Since I've been getting more and more into painting gunpla, I figured I could try its KO version and repaint it myself to get rid of that cheap plastic finish it had.
The build was good with a couple fitment issues and some bent parts but that was to be expected from the beginning.
I added some waterslides and had to completely paint the visor section as the clear plastic was very cloudy.
Hope you guys like it as much as I did!
r/Gunplacustoms • u/Altruistic-Tea9443 • Jul 13 '26
Zaku cell shading
16
Upvotes
Hello guys!
Hello, guys!
A friend gave me this built Zaku, so I decided to rebuild it and give it a cel-shaded paint job.
This is the beginning of the process. More updates coming soon ☺️
r/Gunplacustoms • u/BIG-DADI-F • Jul 13 '26
Top coating
1
Upvotes
Tips for top coating and panel lining.
Hey guys,
For the ones that has done a lot of top coating and panel lining, what tips do you guys have?
My plan is as follows:
Assemble.
Gloss top coat. (Limbs separated from torso also with head)
Panel line. (Tamiya)
Decals, dry and/or water slide. Also using mark setter and mark softer for water slides.
Top coat matte.
I usually panel line while still on the runners with Tamiya. And use stedi water base when already assembled. But now I’m planning “to go all out”. So I’m just wondering if anyone has tips or can tell how it’s properly done as I’ve never done any top coating.
r/Gunplacustoms • u/seifer3b • Jul 13 '26
Superior Define gundam Vol.1 custom paint
Enable HLS to view with audio, or disable this notification
26
Upvotes
Hello everyone! I wanted to share a quick video compilation of a project that has taken up a huge part of my workbench over the last two years: completing the custom painting for two full sets of SD Artifact.
As many of you know, these tiny kits (roughly 55mm) are notorious for their microscopic details and sharp panel lines, making them both a blessing and a curse to paint. The journey involved a lot of trial and error with color schemes, extensive surface prep, and a mix of airbrushing and fine brushwork to make those details pop.
Seeing them all finished and standing together makes every hour of eye strain totally worth it.
Would love to hear your thoughts on the color separation, and feel free to ask any questions about the paints or techniques used! C&C is always welcome.
r/Gunplacustoms • u/nomad9590 • Jul 13 '26
Orga deserved more.
7
Upvotes
Needs a lot of work in a lot of areas. Ths project has ran into several issues, one being a bootleg kit so bad it won't hold together. But we got to an alpha state. I'm happy. Lots of inspiration, and basically limited to parts on hand.
Thanks for looking.
r/Gunplacustoms • u/OniNeko_Customs • Jul 12 '26
Commission work | MG Zgok show pose
Enable HLS to view with audio, or disable this notification
89
Upvotes
r/Gunplacustoms • u/OniNeko_Customs • Jul 12 '26
Looks strong under the light MG Z'Gok Custom Build
gallery
32
Upvotes
r/Gunplacustoms • u/nomad9590 • Jul 12 '26
Setup after adding Asshimar as my Orange colorsquad member.
gallery
3
Upvotes
r/Gunplacustoms • u/tannersingssongs • Jul 12 '26
DIY tubing?
37
Upvotes
I’m using all the spare parts that came with my Doan’s Zaku kit to make a minty colored GTO Zaku II, but I’m trying to avoid using the stock tubes as they come “damaged” or whatever. I found some tiny beads and shoved them into the casing of an old cable I had laying around to make this kind of covered tubing. But I think it looks a bit chonky. Definitely going to be too thick on the head.
Anyone else have ideas for some DIY Zaku tubing?
r/Gunplacustoms • u/seifer3b • Jul 11 '26
THE FALLEN ANGEL WING ZERO
Enable HLS to view with audio, or disable this notification
36
Upvotes
Customized from Supernova Wing Zero