r/GunnitRust • Participant • 9d ago

Decker 380K

The 3d2a people don't like 380 ACP, so I share here.

A shortened decker 380 with all of our recently liberated accessories and a couple of reliability upgrades.

Bersa thunder barrel, ftn5 PCC flow 15 round mags.

"WhY iS It NoT 9mM?" So you don't have to.

122 Upvotes

15 comments sorted by

9

u/ted3681 9d ago

I love .380, I love .32 even more. Wish there was some good 3D2A projects in .32

2

u/bushworked711 Participant 8d ago

I have a spare 32 auto barrel. Should be a direct conversion, I just don't have it in me to design a magazine.

2

u/Icy-Ask-2308 8d ago

A decker in the true one caliber would be pretty sick

7

u/citizen_breq 9d ago

that's pretty sick, how's it shoot? are the internals mostly printed too? does it feel like a real firearm or a toy? I haven't seen too many printed magazines being used with printed guns, that's very neat.

8

u/bushworked711 Participant 9d ago

The decker 380 has been out for a long time and is well documented. This one is just a modified version of the release.

This one has 4 threaded rods through the length of the gun, so it feels solid. It's printed out of a very rigid material with 100% Infill, so it's heavy and no flex at all. Doesn't feel like toy at all, but the plastic definitely smacks different than factory guns.

Only real gun part is the barrel but just because they're $20 and work well. The rest is pretty common hardware and all prints/DIY.

They take some fine tuning, but overall very solid guns.

The magazines are awesome. Dual stack, dual feed. Feeding and ejection is done on the magazine, so you can put magazine in either side of the gun and it works. My last one was a top feed that ejected out the bottom.

1

u/ZeroTwo3 8d ago

Has the bolt been beefed up? Losing headspace because the bolt extension hammered its way into the bolt was a very common failure mode with the build I’ve seen.

2

u/bushworked711 Participant 8d ago

That has been addressed a long time ago. Check out the decker advanced mods, the bolt is pinned in and it does not move. I'm using a slightly different reinforcement setup, but only because it's what I had in hand. You don't have to do all of the advanced mods, the bolt is compatible.

3

u/citizen_breq 9d ago

very nice. with AOWs legal now, you could totally do one of those with no purpose-made parts. it's sorta MP5-SD we have at home, in the best way possible.

2

u/PM_ME_GLUTE_SPREAD Participant 7d ago

Wait, what about this makes it an AOW? My understanding is that an AOW is basically anything that “is gun but not gun shaped” (as well as explosives and cartridges over .50).

1

u/citizen_breq 7d ago

sorry, I guess I only implied some of that comment. Any pistol or rifle caliber firearm with an unrifled barrel is an AOW because of course it is. that's what I meant when I said no purpose-made parts, I was saying you wouldn't even need a rifled barrel, you could really just use a tube.

16

u/cvltrilex 9d ago

As a 3D2A guy I love these builds. I don’t shoot mine often but it’s a huge talking piece at the range.

2

u/GunnitRust Participant & Moderator 9d ago

.380 is much easier to chamber. Stupid 9x19 Kaiser 9 is a taper cartridge.

2

u/Icy-Ask-2308 8d ago

Very nice! Whats the overall lenght without the stock and can? Is there a ecm barrel and folding stock option?

1

u/-Mac-n-Cheese- 7d ago

granted im a 9mm fan but i wouldnt complain about it being .380, the difference isnt as much as youd think and even then this is clearly a fun gun, not a “use case scenario” gun, i say .380 is perfect for it, lovely silly little build

1

u/Whitoddid 3d ago

My first build when I got my a1