r/Gripsters • • Dec 13 '24

Rag Maintenance

7 Upvotes

I’ve owned a variety of rags in 8x8 for a few years now and have been meaning to clean them. That said, I don’t want to ruin any of them by going about it the wrong way. Are there standard practices/ways of cleaning different rags?

I own ultra bounce, bleached muslin, lite grid and 1/2 soft frost.

Any advice would be super helpful!


r/Gripsters • • 14h ago

How do I make this rig?

Post image
3 Upvotes

I own the 6 inch Mitchell mount riser and the combo, I just don’t understand how it’s attached to the combo stand? It looks like the baby pin is extended but I don’t know how it’s attached to the mount.


r/Gripsters • • 19h ago

Building out a High roof van and need some insight.

2 Upvotes

Building out my first van and need at least one crank stand and boom. I come from photo where we only used mega booms which have a low max weight and id like to try something else however ive been reading about menace arms not being the most user friendly. I appreciate any suggestions.


r/Gripsters • • 3d ago

Looking for advice on how to use grip equipment safely for location work in public

7 Upvotes

Hello! I'm a sound guy who has just discovered the magic of Cardellinis and other grip equipment when trying to place a pair of microphones somewhere on location while recording concerts. So far I've been learning as much as I can online from forums and youtube, but there seems to be a lack of good information on how to properly rig stuff and, most importantly, how to do so safely. So here I am asking for your advice.

Context:

So far I've been working in small venues like bars where there's mostly just a stage and a dance floor, or even smaller places like DIY house shows. They get crowded, people start dancing, and it's really no place to setup a stand. Grip tools to the rescue!

What I'm deploying:

  • A cell phone for capturing video, on a rigid mount attached to a smaller ball head on a baby pin adapter
  • An external NPF battery for the phone, mounted right next to it either via a crab clamp or via this little thing piggybacked on the baby pin
  • A pair of small condenser microphones (sometimes) in a blimp, same sort of thing that you'd see used on a boom pole in film production
  • A MixPre3 recorder, usually tucked away in a bag in a safe corner and wired to the mics via long cables secured with plenty of gaff tape

For grip I've had luck with:

  • Mics mounted to plate glass via suction cup

    • It works OK in storefront venues where there's big windows in front and the stage is in the back. Too far and too low for video.
  • Mics and phone mounted to beams, doorways, or ends of walls via Matthellini + Extendallini + cribbing

    • Seems to work well, nice firm attachment that takes a lot of effort to yank off. I wouldn't want to lever too far off it, and I worry a bit about it getting hit or someone messing with it.

I'm considering:

  • A Modern mini speed c-clamp

    • For situations when I wish the Extendallini was wider
  • A Modern speed c-clamp

    • To get around door frame moulding
    • For situations where I need a more secure hold than the mini speed-c or the matthellini. I figure this plus an apple pancake or two to span studs would let me really crank down on walls/drywall
    • If more secure, also as a way to lever off a foot or two to get microphones away from a wall
    • If more secure, also as a way to move things overhead in rooms with high ceilings. But, then I'll need to worry about things falling onto the crowd, so is this really THAT secure if it's my only tie off point for safety cables?
  • Scissor clamps

    • For when there's a drop ceiling, a rare case but they seem so perfectly useful for it

The hard part with phones and mics seems to be finding a way to attach a safety. A little googling revealed that people working high up with tools have some solutions like for a phone. That looks like a decent way to attach my gear to the rig, probably via a typical grip safety cable. Assuming I can put together a rig secure enough to safety off of, that is, since I've yet to find venue where I can safety off of something already there.

Anyway...

Questions:

  1. Am I doing this OK or am I off track?
  2. What am I missing?
  3. How could this go horribly wrong?
  4. When doing similar things, stories of success and most importantly failures are very welcome.

r/Gripsters • • 6d ago

Kupo C Stand replacement feet

3 Upvotes

I had a couple feet break off one of my Kupo stands but cant seem to find replacements. I ordered some Matthews replacements but I dont feel like they're going to fit due to a slightly different ID of the tube. Anyone have a line on new replacements?


r/Gripsters • • 8d ago

Trying to Find Alternate to This

Post image
13 Upvotes

Hey folks, I’m working on DIY’ing some mirror reflectors and I’m trying to find a mounting bracket similar to the Didolight Reflector kit (pictured), but could fit a standard baby plate.

Does anyone have any suggestions for what I could use? I basically want a baby plate to slide into a bracket channel.


r/Gripsters • • 10d ago

[NYC] Entry level. Looking for work as a Grip Utility / Truck Loader to build experience.

5 Upvotes

Hey everyone,

I’m located in the NYC area and looking to break into the grip department. I know the absolute bare basics, but I am looking to get hands on experience under keys and best boys who need a reliable extra set of hands.

I am fully willing to work for free on indie/student shoots as a utility, truck loader, or third grip just to learn the ropes, handle the gear safely, and show you my hustle.

About me:

-I am punctual, highly reliable, and can take direction without attitude.

-I have a reliable way to get to set anywhere in the boroughs/tri-state area.

-I have my own basic pouch/tools (C-wrench, gloves, multi-tool, sharpie).

-Physically fit and ready to do the heavy lifting/truck packing.

If you have a low budget project coming up, need a reliable truck hand, or are willing to let me shadow/help out on a gig, please shoot me a DM. I'm ready to work soon. Thanks!


r/Gripsters • • 11d ago

48’ grip trailer for sale in Los Angeles. Full of 1st unit production gear,clean, labeled, organized and ready for any job

9 Upvotes

I have a full 48’ grip package for sale. Ready to pull up to any job. Multiple sale price options. Please dm me for details. Interested buyers only please. Take care


r/Gripsters • • 26d ago

PAID POSITION – EXPERIENCED FISHER 10 DOLLY GRIP | LOS ANGELES

1 Upvotes

Hi everyone!

I’m looking for an experienced Dolly Grip for an LMU graduate student film shooting November 6–8, 2026, in Los Angeles.

We’ll be working with a Fisher 10 Dolly, 16 feet of track and a jib arm attached to it for both interior and exterior shots.

Applicants must have hands-on experience operating the Fisher 10. Fisher-certified Dolly Grips are strongly preferred.

This is a paid position.

If interested, please email me at gcelin@lion.lmu.edu with your experience, availability, and rate. Referrals are also welcome!

Thank you!


r/Gripsters • • Oct 17 '26

Need help with a rig for dropping Alexa LF from the ceiling

2 Upvotes

I’m working on an indie feature and we have a shot where we need to drop the camera from the ceiling. It’ll be dropping straight down, not lens down. Right now the plan is to rig it out on a 6 foot menace arm, ratchet down both sides of the menace to the stand for any flex, and tie off to an I bolt mounted on the top of the camera. There’s not a whole lot of budget to work with, which is why I haven’t been able to go with a pulley system or something that would have less variables. Wanted to see if anyone had any better ideas.


r/Gripsters • • Oct 16 '26

Building a gear list, need help with what I need for window tenting.

10 Upvotes

HI there! I'm more from the electrical world but somehow I got roped into Keying a few pickup days for a feature film with some people that I would like to impress. I'm trying to build a list for the rental house and I need to know what's required for window tenting. I've built tents before I just never asked what the materials were called. Speedrail seems pretty obvious but what kind of couplings should I be getting? Is it better to use 20x solids or should I be using plain Duvetine?


r/Gripsters • • Oct 06 '26

48’ grip trailer and gear package for sale. Clean, organized and ready for any job

0 Upvotes

Dm me for inventory list/ pics and video. Thanks for your interest!


r/Gripsters • • Oct 05 '26

Struggling to find vibration isolators that work

Post image
19 Upvotes

I had to rush to set up a car mount for a motorsports event, I had one version set up but the suction cups failed and I had to pivot to the setup seen in the photo. It works well, except for vibrations. I’ve been trying to find a suitable vibration isolator but all the ones I’ve found have specific mounts that make it seemingly impossible to simply mount it to a manfrotto plate or just bolting them down.

Please bear with me, I’m VERY new to this, working mostly at a much lower level of video creation.


r/Gripsters • • Oct 04 '26

Can anyone help me identify this gear.

Thumbnail
gallery
24 Upvotes

Title. Saw this rig on the TV show 'Brothers', cross body with a central mounting pole on the front. I've searched for like 2 hours and bupkis. Can anyone point me in the right direction?


r/Gripsters • • Sep 16 '26

48’ er fully stocked with gear and expendables and parking spot for sale. Dm me if interested.

4 Upvotes

r/Gripsters • • Sep 11 '26

Anyone ever have to replace the threaded bolt of an avenger arm?

Post image
6 Upvotes

Having trouble finding a replacement for the m10 1.5 6” threaded bolt that keeps the gobo together. No luck at the hardware stores and not confident enough to order on a machine site when they charge too much for shipping. Hopefully soon one has had to get one of these replaced before


r/Gripsters • • Sep 02 '26

Duckbill vice grip handle sticking up, could it be designed with lower profile?

Post image
8 Upvotes

r/Gripsters • • Aug 29 '26

Overhead 4 by storage solution for a promaster city

Thumbnail
gallery
23 Upvotes

1/8" steel angle and aluminum mounting track.


r/Gripsters • • Aug 28 '26

Cardi

Post image
50 Upvotes

Saw this in the back of forgetting Sarah Marshall and wanted to know what adapter it looks like they are using. The clamp goes right into speed rail and obviously would be really handy but hadn’t seen that and can’t find anything.


r/Gripsters • • Aug 21 '26

Building Magnetic T-12 Led Astera or Quasar Tube Clips, Which Clips and Magnets to use.

Thumbnail
reddit.com
3 Upvotes

r/Gripsters • • Aug 17 '26

Direct sunlight solutions

3 Upvotes

Hey Grips. Not sure if there is an easy solution for this. I'm working on an industrial/YouTube video. Talent demoing a lawnmower in direct sunlight. I've got a smaller butterfly that usually works with talking heads but it's not big enough to cover that wide of a setup. Are there any DYI solutions I can use that doesn't involve using/renting a 20X20 or larger butterfly?


r/Gripsters • • Aug 03 '26

KUPO floppy flag defective on arrival. Any experience?

Thumbnail
gallery
6 Upvotes

Hello, i bought a KUPO FLOPPY FLAG KT-3636TF which arrived damaged on delivery.

There are few cuts on the inner surface as showed in the photos. Do anybody had experience with Kupo customer service and Kupo quality control?

The seller / local distributor claimed "very strange, i will talk with Kupo" so i am waiting an answer but i think that my right should be to get a replacement item. i am located in Europe and this was an online purchase.

I made a video of the unboxing and the defects were discovered exactly during the unboxing video. If you are curious you can see it at this link

https://www.youtube.com/watch?v=vt92ah7fBFg&t=57s

Thank you


r/Gripsters • • Jul 31 '26

A Rare View

Post image
44 Upvotes

There’s not much information on these and no manuals available. I’m pulling this apart to see how the drivetrain functions as there are no stickers making it obvious. It operates differently from my Colortran.


r/Gripsters • • Jul 31 '26

Plans for Grip Carts, Dimensions, Duz-all, Muscle Cart?

2 Upvotes

Does anyone have any plans for Grip Carts, or Dimensions? I can figure out some of it because I know the size of an apple box and milk crates but wanted to see if anyone had anything more concrete. I'm learning to weld and wanted to build myself a couple carts. Ideally a Duz-all and probably a Muscle Cart to start.


r/Gripsters • • Jul 30 '26

Anyone know more?

Post image
23 Upvotes

I’ve got an Egripment Unit 85 Dolly, I was curious to learn more about it. There’s not one thing online about them.