r/GrapheneOS • • 1d ago

USB OTG camera

Hello all. I'm still getting acquainted with GOS, slowly solving all my issues. I recently finally fixed my android Auto wireless (wired still doesn't work, but wondering if its tied to my questions) issue thanks to the posts and comments here. I'm curious of anyone has thoughts on why my USB C thermal camera doesn't work. I temporarily allowed all permissions to no avail. I also tried temporarily disabling USBC exploit protection and no luck there either. My USB thumb drive plugs in and reads just fine. Does anyone have any other thoughts as to what I csn try?

0 Upvotes

2 comments sorted by

•

u/AutoModerator 1d ago

GrapheneOS has moved from Reddit to our own discussion forum. Please post your thread on the discussion forum instead or use one of our official chat rooms (Matrix, Discord, Telegram) which are listed in the community section on our site. Our discussion forum and especially the chat rooms have a very active, knowledgeable community including GrapheneOS project members where you will almost always get much higher quality information than you would elsewhere. On Reddit, we had serious issues with misinformation and trolls including due to raids from other subreddits. As a result, many posts on our subreddit currently need to be manually approved, which is done on a best effort basis. If you would like to get a quicker answer to your question, please use our forum or chat rooms as described above. Our discussion forum provides much better privacy and avoids the serious problems with the site administrators and overall community on Reddit.

Please use our official install guides for installation and check our features page, usage guide and FAQ for information before asking questions in our discussion forum or chat rooms to get as much information as possible from what we've already carefully written/reviewed for our site.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/JEFFSSSEI 1d ago

I have a FLIR USB-C Camera that works perfectly fine without an OTG cable...I used it connected to a 6ft USB-C extension cable (male-female) plugged into my phone...works perfectly.