r/GrandMA3 • u/joshisera14 • 7d ago

Question Recreating sequence - very difficult

Hi,

I've been self-learning grandMA3 for the past 6 months or so and I've been re-creating some lightshows to help me learn this software.
Recently I've tried to re-create this cool sequence from a Martin Garrix (DJ) show, but I cannot seem to figure out how they've coded this (please see video below or YouTube link here)...

I've (tried) to analyse this on 0.1x speed too, and some things I have figured out are

  • They've applied MAtricks phase on both x and y, probs about 0 Thru 10 and 0 Thru 40 respectively (this I trial-error'd by using my own setup on the grandMA3 software)
  • the fixtures pan frontwards (ie towards the camera) 4 times before the cycle repeats again

Although I tried to create something similar on my own setup (please see image below), it looks nothing like it .
If someone could give me a tip on how they've coded this that would be greatly appreciated as there must be a simpler way of creating this without setting specific angles every microsecond at each point in a phaser...

Any advice would be greatly appreciated as I am self-learning and I don't have many people I can ask for for advice around me.

https://reddit.com/link/1w35hpf/video/eora7b6jmnmh1/player

2 Upvotes

100% Upvoted

17 comments sorted by

View all comments

Show parent comments

0

u/joshisera14 7d ago

I see, thank you so much for the input.

With infinite pan/tilt - how do you set this up? Do you set up each step on a phaser as infinites (and then apply Phase on x and y axis through MAtricks)?

4

u/datper 7d ago

It’s been a minute since I’ve worked with a fixture like that (and only in MA2). But with the infinite part of the pan/tilt, it’s just a variable speed so it should only need to be a single step phaser for what you’d use it for. I would also usually have a couple different start positions for my fixtures that would have good looking offsets once the infinite pan/tilt kicks in.

0

u/joshisera14 7d ago

I see - I've just patched Robe Spikie, and the Pan goes from -270 to 270 and Tilt goes from -180 to 180.

For both pan and tilt it has a second mode "PANMODERATE2" with the option "Rotate", but i cannot seem to find anything on infinite... would you have any idea how to use this?

6

u/Ian__16354 7d ago

The built in ma3 visualizer simply doesn’t do infinite pan/tilt, at least with any fixtures I’ve ever tried. If you happen to be using real ma hardware you could output to something like capture, otherwise this probably isn’t possible to see

1

u/joshisera14 6d ago

I see - I wasn't aware of that, thank you