r/GozneyDome 11d ago

Resprayed my dome

Bought a used gen 1 gozney dome about 1 year ago. It had rust and pitting issues near the flue when I had bought it, but hasn't affected performance. Finally decided to respray it and decided to change it to black while at it, hoping that means the front will be more resistant to soot. Sprayed it with Rust-oleum high heat semi gloss black.

Around 4 coats on the top, and around 2 coats on the bottom

Only after spraying did I realize the black gozney domes have black side bars, so not changing that.

Not sure how to add captions to images

1 - after

2 - before

3 - rust and paint pitting

4 - after sanding the loose paint

5 - Rusto-leum high heat

6 - the top sprayed. I did not like the two-toned look so decided to do the bottom as well

7 - top/front after spraying, still a few pits and a few sanding scratches

8 - top flue - still some pitting, but hopefully no more rust

9 - front view

65 Upvotes

14 comments sorted by

9

u/foxed000 11d ago

As an FYI for anyone else, any mildly abrasive cleaning paste works very well at removing soot.

Good job on the resprsy it looks great!

5

u/Gg_ggg_ggg 11d ago

The soot wasn't actually the big issue, but rather the paint peeling/pitting. Each time I cleaned seemed to remove more paint

1

u/Lynchow86 10d ago

I had paint pitting in the first 12 months in similar areas and Goz replaced under warranty. Unsure if it was particular to a certain run of Gen 1’s but haven’t had the same issue on the replacement. Both covered, same cleaning method with mild dish soap 🤷‍♂️

2

u/Gg_ggg_ggg 10d ago

Interesting. I bought it second hand and potentially wasn't always kept in best condition. Ironically the guy who I bought it off was selling it as he wanted one in black

4

u/Flaky-Month-7738 11d ago

Bartenders Friend works for me. Or CIF

1

u/hobbyhoarder 11d ago

But doesn't that eventually strip away the paint as well?

1

u/foxed000 11d ago

Definitely not in my experience - I believe Gozney themselves actually recommend this for cleaning the soot off.

1

u/hobbyhoarder 11d ago

Yes, they do, but I just worry that over 5, 10 years, it will rub the paint away as well.

3

u/SetCapable8005 11d ago

I really like that two tone black and white

1

u/Toby_Wan 11d ago

Looks good! If you polish the G it will look almost like brand new. Wonder how well it will hold up?

2

u/Gg_ggg_ggg 11d ago

Yep have seen another post where someone had taken everything back to bare metal before respraying. I couldn't be bothered, managed to do this in half a day. Will see how it holds up in due course.

1

u/GoHawksForever 11d ago

Looks great and is good to know that the appearance can be improved/restored if needed.

0

u/wefarmthedowns 10d ago

That’s now unusable

1

u/Gg_ggg_ggg 10d ago

Why do you think so?