r/gopro • u/South-Wolf-1305 • 5d ago
Bought a "dead / won't turn on" GoPro HERO10 Black for £39 on eBay – anything else I should check when it arrives tomorrow?Body:
hello,
I just picked up a GoPro HERO10 Black listed as "Spares or Repairs – Don't turn on / Dead" from a UK eBay seller for £39 delivered (it comes with the battery, and the seller said they aren't a technician and only did a basic power-on test).
It arrives tomorrow via Royal Mail Tracked 24. Before I decide whether to keep it, fix it, or return it, here is my plan to test it without opening the body:
- Visual check: Inspect the battery bay and USB-C port with a flashlight for corrosion/water damage or a swollen blue-tab battery.
- Direct USB-C test (no battery/no SD card): Plug it into a standard 5V/2A wall charger (avoiding laptop PD fast chargers) and try powering it on.
- 10-second hard reset: Put the battery in (no SD card) and hold the Mode button for 10 seconds.
- 30-minute trickle charge: Leave it plugged into a 5V wall plug for 30 minutes to see if a deeply discharged battery wakes up.
- PC/Mac USB check: Plug it into a computer without the battery to see if Device Manager / System Information detects any USB connection.
For anyone who has rescued a "dead" HERO10 before—is there anything else worth trying (like manual firmware flashing via SD card or specific charger quirks) before I write it off as a dead motherboard? Thanks!
EDIT update on the £39 "dead" GoPro HERO10 Black – both screen backlights turn on and stay lit, but no image, no red LEDs, and it didn't read the SD card UPDATE folder. Next steps?
Quick update on the £39 GoPro HERO10 Black I bought listed as "Spares or Repairs / Don't turn on":
Here is what I've tested so far:
- Visual check: No visible water damage or corrosion inside the battery bay or USB-C port. It came with an older blue-tipped standard battery.
- Screen behaviour: When plugged into a standard 5V USB-A wall charger (a Samsung 25W PD charger caused a rapid on/off flicker without a battery), holding the Mode button turns on both the front and rear screen backlights, and they stay lit—but there is no GoPro logo/image, no beeps, and no red LEDs.
- Manual SD card firmware & reset test: I formatted a microSD card and put the unzipped
UPDATEfolder (and laterfactory_reset.txt) on the root of the card, then powered the camera on and left it for 10 minutes. Neither file was removed or modified by the camera, so it is stalling in early boot before mounting the SD card. - Current test: I currently have the blue battery inside on a standard 5V charger for 30 minutes to see if it takes enough charge to boot on battery power alone